POSI-LOK Small Flagpole Winch 2 Inches Wide Up To 35 Feet Flagpoles with Diameter of 5 Inches WCS525W

SMALL FLAGPOLE WINCHES (WCS525W)

The POSI-LOK Small Flagpole Winch (WCS525W) is sized for flagpoles with a 5-inch butt and is up to 35 feet tall.

The POSI-LOK Small Flagpole Winch (WCS525W) flagpole winch is 2 inches wide.

The POSI-LOK Small Flagpole Winch (WCS525W) works with either 1/8" (inch) or 5/32" (inch) stainless steel cable.

The POSI-LOK Small Flagpole Winch (WCS525W) mounting hole centers are 3-1/2" (inches) apart.

The POSI-LOK Small Flagpole Winch (WCS525W) dimensions – 4" (inches) high x 4 1/4" (inches) wide x 2" (inches) deep

The POSI-LOK Small Flagpole Winch (WCS525W) dimensions – LxWxH 4.25" (inches) x 2" (inches) x 4" (inches)

Mounted with 2 Bolts and lock washers, normally 5/16 inch-18NC or 3/8 inch-16NC, it comes standard with 5/16 inch-18NC and lock washers. The 3/8 inch-16NC bolts have to be purchased separately.

POSI-LOK internal flagpole winches are superior to other winches in the industry due to a patented design that eliminates slipping. Other flagpole winches allow the flag to drift down over time. However, the POSI-LOK internal flagpole winch has a locking mechanism that allows for years of service with NO SLIPPING or drift. Insert the handle (sold separately crank handle #360051) into the winch, crank the flag to the desired position, and remove the handle sold separately crank handle #360051). The winch will firmly lock in place and stay in position until the handle is reinserted and turned. This winch is assembled with #304 stainless steel, and the POSI-LOK flagpole winches stand up in all environments and only require routine lubrication. Additionally, this winch is 100% MADE IN THE USA!

Model: WCS525W

Size: Small Winch

Additional Compatibility Requirements for This Winch:

Flagpole Bottom Diameter: The diameter at the base of the flagpole is 5 inches

Flagpole Height: Maximum of 35 Feet Tall

Stainless-Steel Cable Diameter: Works with either 1/8" (inch) or 5/32" (inch) stainless steel cable

LxWxH of the Small WCS525W Winch:

Length: 4-1/4 Inches

Width: 2 Inches

Height: 4 Inches

4-1/4x2x4 Inch

4.25x2x4 Inch

Crank Handle compatible with this winch: 9 Inch Handle Crank For Stainless Steel Flagpole Winches Internal Halyard 360051 (fortisvex.com)

POSI-LOK winches for flagpoles are utilized in both Acme Flagpoles and Lingo Flagpoles, collectively referred to as Acme Lingo Flagpoles. FORTISVEX is an authorized reseller of POSI-LOK flagpole winches.