Connecticut 10x15 Feet Nylon State Flag Made in USA

At a hundred and fifty square feet, a 10x15 foot flag reads from far away, and that distance is exactly why someone chooses it. The flagpole and the hardware need to match that scale.

This is the Connecticut state flag at 10x15 Feet (150 square feet) in nylon, made in the United States and finished with a sewn rope and plated steel thimbles.

Built to the Connecticut flag specification

The Connecticut flag is set out in Connecticut General Statutes Section 3-107, with the arms at Section 3-105. It is an azure field with a white rococo shield carrying three grapevines and the motto Qui Transtulit Sustinet. The statute gives exact dimensions of five feet six inches by four feet four inches, describing the silk ceremonial color rather than a standard outdoor size.

Adopted in 1897.

Connecticut General Statutes Section 3-107 fixes the flag at five feet six inches by four feet four inches in azure blue silk. That is a ceremonial color from 1897. Nobody makes an outdoor flag in that size and the state itself does not fly one.

This flag reproduces the design faithfully, built to the standard outdoor sizes used across the industry and bought by the states themselves. The colors, the seal and the emblems are the part that has to be right on an outdoor flag, and they are right here.

The law that defines it, in its own words

Connecticut General Statutes Section 3-107 reads:

The following-described flag is the official flag of the state. The dimensions of the flag shall be five feet and six inches in length, four feet and four inches in width. The flag shall be azure blue, charged with an argent white shield of rococo design, having in the center three grape vines, supported and bearing fruit in natural colors. The bordure to the shield shall be in two colors, gold on the interior and silver on the exterior, adorned with natural-colored clusters of white oak leaves (Quercus alba) bearing acorns. Below the shield shall be a white streamer, cleft at each end, bordered by a band of gold within fine brown lines, and upon the streamer in dark blue block letters shall be the motto "QUI TRANSTULIT SUSTINET"; the whole design being the arms of the state.

You do not have to take our word for any of that. Read Connecticut General Statutes Section 3-107 in full at Justia, and check what we sell against it.

This is the actual flag we manufacture, not an approximation.

What is on it and what it means

The motto translates as He Who Transplanted Sustains. The three grapevines trace to a seal of 1711 and stand for the early settlements and the transplantation of the colony itself.

Worth knowing about this flag

The statute specifies a fixed size rather than a ratio, which means a scaled flag is a departure from the letter of the law even though every manufacturer scales it.

Where the Connecticut flag flies

Each holds a significant Civil War battle flag collection. Connecticut's is at the Museum of Connecticut History in Hartford. Illinois has the State Military Museum in Springfield. Massachusetts has the State House Hall of Flags. Michigan runs a Save the Flags program with rotating display at the Capitol. Minnesota's Historical Society holds the First Minnesota's colors associated with Gettysburg.

The Milford Green flagpole, a hundred and ten feet, a fiberglass pole dedicated in 2014 replacing a ninety nine point seven foot steel pole. Milford's mayor described it as the tallest flagpole in the state. It flies a twenty five by thirty foot flag, was gifted by the Devon Rotary, and was made and installed by All American Flagpole of Woonsocket, Rhode Island. The prior notable pole is the hundred foot Newtown flagpole, which stands in the middle of a street intersection.

Fly it on Connecticut’s birthday

Connecticut became the 5th state on January 9, 1788. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Connecticut flag has an official reason to go up.

Buy it in time and it goes up on the day it matters. Every state’s date is on our state birthdays page.

Nylon or polyester in Connecticut

Nylon inland at Hartford. Polyester on Long Island Sound at Bridgeport, New Haven and Stamford for salt and coastal wind.

On an exposed site from the list above, a hundred and fifty square feet makes nylon a non-starter. Check the flagpole and truck rating regardless of which material you order.

What you have here is the nylon, appropriate for the sheltered and moderate wind sites listed above, for any house bracket, and for anywhere the flag is brought down during storms. Two things decide it: it is light, flying on an ordinary breeze rather than going limp, and it dries fast, which is the defense against mildew in humidity. The trade is ultraviolet durability — nylon’s amide bonds break under sun, fading and weakening faster than polyester, and it loses about a tenth of its strength wet. For an exposed site on the list above, the polyester version is worth a look instead.

The part most buyers learn only the second time around: nylon flies in wind too light to move polyester. When it matters that the flag is actually moving — a still morning, a holiday, a funeral, a ceremony — that favors nylon even somewhere polyester would last longer. A flag that hangs motionless is not doing its job either, however durable it is.

Institutions commonly cite the American Legion’s figure: the federal government expects about ninety days from a flag flown daily sunrise to sunset, and roughly a quarter of that flown around the clock. On the ground, retailers report three to six months for nylon flown daily, four to eight for polyester, and one to three years for occasional flying. Take these as working estimates, not warranties — exposure can move them a long way in either direction.

How the 10x15 Feet is built

Six rows at the fly end, zig zag stitched corners: at this area the wave traveling out to the tip moves fast enough that corner seams are the first place wind tests the flag.

The arithmetic behind that: 150 square feet of nylon at roughly two ounces a square yard. In a thirty mile an hour wind the fly end of a flag this size travels faster than the wind itself, because the wave running out to the tip accelerates as it goes. That is why the tip wears out first and why the stitching count at that end is the number worth reading on any listing.

Before it shows up, plan the handling — two people who know what they are doing, calm weather, halyard ready. A hundred and fifty square feet is not something to improvise.

Lock stitching means each stitch is knotted into the next, so a broken thread stops where it broke rather than unzipping the seam. 6 rows does not mean 6 times the strength; it means 5 backups. The full heading length carries a sewn nylon rope, ending in two plated steel thimbles. A grommet simply would not hold at this size.

This is commercial grade nylon: light enough to fly in a light wind, quick to shed water instead of holding it, and fast to dry, which matters because a waterlogged flag is a heavier flag putting more strain on its seams. UV resistant, field tested ink is what fights the sun, which is the real driver of color loss over time.

Why this flag is harder to make than most

A fine rococo shield with three vines and a Latin motto. This is an arms-on-blue design, and the shield detail is where cheap reproductions fall apart first.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Connecticut flag placed 50, at 4.32 out of 10.

Will it fit my flagpole?

Fifty to sixty feet of in-ground flagpole, with truck and halyard rated for the load, is the right pairing.

Questions about the 10x15 Feet

What size flagpole for a 10x15 foot flag? Fifty to sixty feet, and the truck and halyard must be rated for a hundred and fifty square feet in a gust.

Is a 10x15 foot flag too big for my flagpole? If the flagpole was not specified for it, yes. An oversized flag damages the flagpole before it damages itself.

How is a 10x15 foot flag shipped? Rolled where possible, folded where it must be. Creases from folding relax within days of flying.

Check the flagpole before the flag

A hundred and fifty square feet can load a flagpole past what it was engineered for. Confirm the flagpole and truck rating before ordering this size — an oversized flag on an undersized pole damages the pole first, the flag second.

Specifications

• Size: 10x15 Feet
• Area: 150 square feet
• Material: 100 percent nylon
• Fly end: 6 rows of lock stitching
• Heading: heavy duty white, reinforced, 2 inch
• Finish: Rope, Thimbles and Center Grommet
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

The rule behind both tables below is that a flag’s length should run about a quarter to a third of the flagpole’s height. Where two sizes both fit, the smaller one flies more often and lasts longer, and the larger one reads from further away.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

The quarter to a third rule holds all the way up, but above about a hundred feet the flag and the flagpole stop being two purchases and become one engineered system: the truck, the halyard, the foundation and the wind load all have to be specified together, and a flag bought without checking the flagpole rating damages the flagpole first. Several famous installations deliberately fly longer than the rule, which is a choice made with an engineer rather than from a chart.

We do not limit ourselves to what is listed on the site. The full range above is available to order, and an unlisted size can still be supplied.

About the back of the flag

Every printed flag looks right from one side and mirrored from the other, and that is simply how the overwhelming majority of American flags are built. Making both sides read correctly means building what is really two flags stitched together over a liner, at roughly twice the price and twice the weight. Single sided is the standard, and it is the right choice unless a state’s statute specifically requires otherwise.

Flying it with the United States flag

This is governed by the United States Flag Code, Title 4, Section 7: the United States flag always outranks every other flag in position, never displayed below it or to its right at the same level — right from the viewer’s side, that is. Two flagpoles of equal height place the United States flag at the viewer’s left with both flags the same size; if the poles differ in height, it goes on the taller pole; on one pole flying two flags, it sits at the top. The Flag Code carries no penalty for private citizens, but institutions treat it as the standard.

Buy two and they both last longer

Fly one for a month, then swap. Two flags rotated monthly will outlast three flags flown to destruction, because the fabric recovers when it rests and the fly end stops taking the same abuse in the same place. Take it down in severe weather; a flag left up through a real windstorm can take more damage in one night than in six normal months. And watch the fly end rather than the middle, because a few minutes with a needle when the fraying starts buys another season.

For cities, counties, schools and agencies

Fire and police departments, school districts, courthouses, municipalities and state agencies are all regular buyers of our state flags. Tax exempt purchasing is set up through the tax exempt page, and quantities, replacement schedules or an unlisted size are handled through the contact page.

Why buy it from us

Small and American describes this company, and we stock what we list. Every flag is made in the United States, printed with UV resistant ink, and finished to the construction described above rather than to a price target. We’d rather sell one flag that holds up than three that don’t. Free shipping on orders over twenty five dollars.