FORTISVEX

FORTISVEX Wyoming State Flag 6x10 Feet Nylon - Made in USA with Brass Grommets

(No reviews yet) Write a Review
MPN:
FPAMSTWYNYL6x10G
Availability:
Free Shipping* https://fortisvex.com/shipping-returns-terms/
Shipping:
Calculated at Checkout
MSRP: $214.00
$172.95
— You save $41.05
Frequently bought together:

Description

Residential ends here. A 6x10 foot flag is sixty square feet of commercial flag for a commercial flagpole — and the last size still finished with grommets rather than a sewn rope.

This is the Wyoming state flag at 6x10 Feet (60 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the Wyoming flag specification

The Wyoming flag is set out in Wyoming Statutes Section 8-3-102, with the seal at Section 8-3-101, at a seven to ten proportion. It is a blue field bordered in white then red, with a white bison silhouette carrying the state seal in blue on its flank.

Designed by Verna Keays for a Wyoming Daughters of the American Revolution contest in 1916 and adopted January 31, 1917.

Wyoming specifies proportions rather than a size. Section 8-3-102 sets the width at seven tenths of the length and defines the border, the stripe, the bison and the seal as fractions of the whole. Seven to ten is not a standard commercial size, and vexillologists have noted for years that manufacturers do not build to it.

Faithfully reproduced, that is the standard we hold this design to, at the outdoor sizes the whole industry uses and states themselves order. What an outdoor flag needs right is the color, the seal and the emblems, and this one has them right.

The law that defines it, in its own words

Wyoming Statutes Section 8-3-102, subsection (a) reads:

A state flag is adopted to be used on all occasions when the state is officially and publicly represented. All citizens have the privilege of use of the flag upon any occasion they deem appropriate. The width of the flag shall be seven-tenths (7/10) of its length; the outside border shall be in red, the width of which shall be one-twentieth (1/20) of the length of the flag; next to the border shall be a stripe of white on the four (4) sides of the field, which shall be in width one-fortieth (1/40) of the length of the flag. The remainder of the flag shall be a blue field, in the center of which shall be a white silhouetted buffalo, the length of which shall be one-half (1/2) of the length of the blue field; the other measurements of the buffalo shall be in proportion to its length. On the ribs of the buffalo shall be the great seal of the state of Wyoming in blue. The seal shall be in diameter one-fifth (1/5) the length of the flag. Attached to the flag shall be a cord of gold with gold tassels. The same colors shall be used in the flag, red, white and blue, as are used in the flag of the United States of America.

You do not have to take our word for any of that. Read Wyoming Statutes Section 8-3-102 in full at Justia, and check what we sell against it.

This is the actual flag we manufacture, not an approximation.

What is on it and what it means

The bison is the plains and the state’s wildlife. The seal branded on its flank represents livestock and the branding heritage. The seal figures carry Equal Rights, for Wyoming as the first territory to grant women the vote, alongside livestock, mining and grain.

Worth knowing about this flag

Keays drew the bison facing the fly. The version adopted reversed it to face the hoist, which is the one you fly today.

Where the Wyoming flag flies

Wyomingites obtain United States Capitol flags through the congressional delegation, residents only, with a flying and certificate fee plus shipping. the Governor routinely orders the Wyoming State flag specifically flown at half staff at the Capitol, sunrise to sunset, to honor individuals. The Capitol's gold leaf gilded copper dome, one of only about ten gold domed American capitols, was re-gilded five times, most recently during the 2016 to 2019 Capitol Square restoration, when a new copper dome and gilded finial were installed and the Capitol reopened on July 10, 2019.

Fly it on Wyoming’s birthday

Wyoming became the 44th state on July 10, 1890. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Wyoming flag has an official reason to go up.

Get it now so it is flying on the day itself. See every state’s birthday on our state birthdays page.

Nylon or polyester in Wyoming

Polyester statewide. Cheyenne at roughly 12.9 to 14.6 miles per hour is among the windiest American stations, and the state is known for relentless wind and high altitude ultraviolet.

Even polyester needs regular replacement here.

This is a commercial flag at sixty square feet, and on the exposed sites named above, material choice separates a one-season flag from a three-season one.

This listing is nylon, right for the sheltered and moderate wind sites above, for a standard house bracket, and for anywhere you take the flag down before a storm. Two things make it the pick. It flies on the breeze most yards actually see instead of hanging flat, being light, and it dries fast, which fights mildew where humidity is high. What it sacrifices is ultraviolet resistance: nylon’s amide bonds absorb and break under sun, losing strength and color faster than polyester, plus roughly a tenth of its strength while wet. For an exposed site from the list above, the polyester version is the better choice.

Here is the part usually learned the hard way, after a second purchase: nylon catches wind on days polyester simply will not move. When the flag needs to be visibly flying — a quiet morning, a holiday, a funeral, a ceremony — that argues for nylon even on a site where polyester would technically last longer. A flag that just hangs there is not doing its job either.

The benchmark institutions generally lean on comes from the American Legion: the federal government's own expectation is about ninety days for a daily sunrise-to-sunset flag, and roughly a quarter of that flying around the clock. Retailers report three to six months for nylon flown daily, four to eight months for polyester, and one to three years for occasional flying. Treat those as working estimates rather than a warranty, since exposure can shift them a great deal.

How the 6x10 Feet is built

At sixty square feet the force at the fly end outstrips anything a house flag sees, which is why the stitching steps up to six rows here instead of four.

Here is the arithmetic: 60 square feet of nylon at roughly two ounces a square yard. A thirty mile an hour wind sends the fly end moving faster than the wind itself, since the wave traveling toward the tip picks up speed as it goes — which is why the tip wears out first, and why the fly end's stitching count is the figure to check on any listing.

Two people to fold properly, and a clear patch of ground or a clean surface. Sixty square feet does not fold on a tailgate.

A lock stitch ties into the stitch next to it, so one broken thread does not unzip the whole seam — it just stops. 6 rows is not 6 times the strength; it is 5 backups. This size puts the most sustained strain on the heading of anything on the flag, so it is built two inches wide, heavy duty white and reinforced, with brass grommets and tooth washers.

The material here is commercial grade nylon. Its lightness lets it fly on a gentle breeze, it sheds rather than absorbs water, and it dries quickly, sparing the seams the extra weight and strain of staying wet. Field tested UV resistant ink handles the part that actually determines fade life: sun exposure.

Why this flag is harder to make than most

A large bison silhouette is straightforward, but the seal branded on its flank is fine detail inside a shape, which is harder than a seal on an open field.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Wyoming flag placed 23, at 6.28 out of 10.

Will it fit my flagpole?

It suits an in-ground flagpole of thirty to forty feet.

Questions about the 6x10 Feet

What size flagpole for a 6x10 foot flag? Thirty to forty feet. At this size the flag is commercial and the flagpole has to be an in-ground pole with a truck and halyard.

Why does the 6x10 foot flag have grommets when the 8x12 foot flag has a rope? Sixty square feet is the most two brass grommets can be asked to carry. Above this the load is spread along a rope sewn the length of the heading.

Does a 6x10 foot flag need a heavier flagpole? A sixty square foot flag in a gust loads a flagpole hard. If the pole was sold for a 4x6 foot or 5x8 foot flag, check its rating before stepping up.

The last size on grommets

Everything above this is finished with a rope sewn the full length of the heading rather than two grommets, because two points can no longer carry the load. The 6x10 foot flag sits right at that boundary, which is why it runs six rows of stitching and a two inch heading while still using grommets.

Specifications

  • Size: 6x10 Feet
  • Area: 60 square feet
  • Material: 100 percent nylon
  • Fly end: 6 rows of lock stitching
  • Heading: heavy duty white, reinforced, 2 inch
  • Finish: Brass Grommets
  • Ink: UV resistant, field tested
  • Made in the United States by FORTISVEX

Which size do I need?

The proportion that makes both tables work is simple: length equal to roughly a quarter to a third of the flagpole’s height. Sitting between two sizes is common, and the choice there is really a trade between a flag that flies often and one that is seen from a distance.

If you know your flagpole height, start here.

  • 6 Feet house bracket: 2x3 Feet or 3x5 Feet
  • 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
  • 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
  • 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
  • 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
  • 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
  • 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
  • 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
  • 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
  • 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
  • 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
  • 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
  • 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

  • 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
  • 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
  • 4x6 Feet: 18 to 25 Feet in-ground flagpole
  • 5x8 Feet: 25 to 35 Feet flagpole
  • 6x10 Feet: 30 to 40 Feet flagpole
  • 8x12 Feet: 40 to 50 Feet flagpole
  • 10x15 Feet: 50 to 60 Feet flagpole
  • 12x18 Feet: 60 to 80 Feet flagpole
  • 15x25 Feet: 80 to 100 Feet flagpole
  • 20x30 Feet: 100 to 120 Feet flagpole
  • 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
  • 30x50 Feet: 150 to 200 Feet flagpole
  • 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
  • 50x80 Feet: 240 Feet and above, engineered to the flagpole

Push the flagpole past a hundred feet and the same ratio still applies, but it stops being a simple lookup: the flag, the truck, the halyard, the foundation and the wind load need to be engineered as a unit, and skipping that step damages the flagpole before it damages the flag. A number of famous large flags deliberately break the rule of thumb, on an engineer’s word rather than a table’s.

We carry the full range whether or not every size appears on this website. If the size you need is not listed, we can still supply it.

About the back of the flag

Every printed flag looks right from one side and mirrored from the other, and that is simply how the overwhelming majority of American flags are built. Making both sides read correctly means building what is really two flags stitched together over a liner, at roughly twice the price and twice the weight. Single sided is the standard, and it is the right choice unless a state’s statute specifically requires otherwise.

Flying it with the United States flag

Section 7 of Title 4, the United States Flag Code, addresses this directly: the United States flag is never outranked in position, staying above every other flag and to the right at the same level, which reads as the viewer’s left. Same-height flagpoles put the United States flag on the viewer’s left with matching flag sizes; different heights put it on the taller pole; one flagpole with two flags puts it at the top. There is no legal penalty for civilians under the Flag Code, but it is what every institution follows anyway.

Buy two and they both last longer

Two flags, alternated month to month, beat three flags flown until they fall apart, because the material recovers on its days off and the fly end is not worked in the same place every day. Severe weather is the one time to take it down; a real windstorm can cost more in one night than six ordinary months of flying. Fraying starts at the fly end, not the middle, and a few minutes with a needle there adds a season.

For cities, counties, schools and agencies

Fire and police departments, school districts, courthouses, municipalities and state agencies are all regular buyers of our state flags. Tax exempt purchasing is set up through the tax exempt page, and quantities, replacement schedules or an unlisted size are handled through the contact page.

Why buy it from us

We run a small American company and stock the flags we sell. Each one is made in the United States, printed in UV resistant ink, and built to the construction described above instead of built to hit a lower price. One durable flag beats three that fail, in our view. Free shipping applies to orders over twenty five dollars.

View AllClose

Additional Information

Material Type:
Commercial Nylon
Flag Size:
6x10 Feet
Made in:
USA
Finish:
Brass Grommets
View AllClose