FORTISVEX Wyoming State Flag 4x6 Feet Nylon - Made in USA with Brass Grommets

A 4x6 foot flag is the first size that really needs a flagpole in the ground. It is too large for a standard house bracket, and that is the honest reason to step up to it rather than any question of appearance.

This is the Wyoming state flag at 4x6 Feet (24 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the Wyoming flag specification

The Wyoming flag is set out in Wyoming Statutes Section 8-3-102, with the seal at Section 8-3-101, at a seven to ten proportion. It is a blue field bordered in white then red, with a white bison silhouette carrying the state seal in blue on its flank.

Designed by Verna Keays for a Wyoming Daughters of the American Revolution contest in 1916 and adopted January 31, 1917.

Wyoming specifies proportions rather than a size. Section 8-3-102 sets the width at seven tenths of the length and defines the border, the stripe, the bison and the seal as fractions of the whole. Seven to ten is not a standard commercial size, and vexillologists have noted for years that manufacturers do not build to it.

What we build is a faithful reproduction of that design, sized to the standard outdoor sizes every manufacturer uses and the states themselves order in. On an outdoor flag, the colors, the seal and the emblems are what has to be right, and here they are.

The law that defines it, in its own words

Wyoming Statutes Section 8-3-102, subsection (a) reads:

A state flag is adopted to be used on all occasions when the state is officially and publicly represented. All citizens have the privilege of use of the flag upon any occasion they deem appropriate. The width of the flag shall be seven-tenths (7/10) of its length; the outside border shall be in red, the width of which shall be one-twentieth (1/20) of the length of the flag; next to the border shall be a stripe of white on the four (4) sides of the field, which shall be in width one-fortieth (1/40) of the length of the flag. The remainder of the flag shall be a blue field, in the center of which shall be a white silhouetted buffalo, the length of which shall be one-half (1/2) of the length of the blue field; the other measurements of the buffalo shall be in proportion to its length. On the ribs of the buffalo shall be the great seal of the state of Wyoming in blue. The seal shall be in diameter one-fifth (1/5) the length of the flag. Attached to the flag shall be a cord of gold with gold tassels. The same colors shall be used in the flag, red, white and blue, as are used in the flag of the United States of America.

You do not have to take our word for any of that. Read Wyoming Statutes Section 8-3-102 in full at Justia, and check what we sell against it.

This is what we actually make, not a stand-in for it.

What is on it and what it means

The bison is the plains and the state’s wildlife. The seal branded on its flank represents livestock and the branding heritage. The seal figures carry Equal Rights, for Wyoming as the first territory to grant women the vote, alongside livestock, mining and grain.

Worth knowing about this flag

Keays drew the bison facing the fly. The version adopted reversed it to face the hoist, which is the one you fly today.

Where the Wyoming flag flies

Wyomingites obtain United States Capitol flags through the congressional delegation, residents only, with a flying and certificate fee plus shipping. the Governor routinely orders the Wyoming State flag specifically flown at half staff at the Capitol, sunrise to sunset, to honor individuals. The Capitol's gold leaf gilded copper dome, one of only about ten gold domed American capitols, was re-gilded five times, most recently during the 2016 to 2019 Capitol Square restoration, when a new copper dome and gilded finial were installed and the Capitol reopened on July 10, 2019.

Fly it on Wyoming’s birthday

Wyoming became the 44th state on July 10, 1890. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Wyoming flag has an official reason to go up.

Buy it in time and it goes up on the day it matters. Every state’s date is on our state birthdays page.

Nylon or polyester in Wyoming

Polyester statewide. Cheyenne at roughly 12.9 to 14.6 miles per hour is among the windiest American stations, and the state is known for relentless wind and high altitude ultraviolet.

Even polyester needs regular replacement here.

At this size, twenty four square feet, wind load starts to count, and the material verdict above applies with more force than at house flag size.

The nylon is what you are looking at here — the right choice for the sheltered and moderate wind sites named above, for a house bracket, and for anywhere the flag comes down ahead of storms. Two things settle it. It is light enough to fly on an ordinary yard’s breeze rather than sag, and it dries fast, fighting mildew in humid conditions. What it gives up is resistance to ultraviolet — nylon’s amide bonds break under sun, costing strength and color faster than polyester, and it loses roughly a tenth of its strength while wet. If the site is one of the exposed ones above, the polyester version fits better.

Here is the part usually learned the hard way, after a second purchase: nylon catches wind on days polyester simply will not move. When the flag needs to be visibly flying — a quiet morning, a holiday, a funeral, a ceremony — that argues for nylon even on a site where polyester would technically last longer. A flag that just hangs there is not doing its job either.

The number most institutions rely on traces to the American Legion, which reports a roughly ninety-day expectation from the federal government for a flag flown daily sunrise to sunset, and about a quarter of that flown around the clock. Retailer experience puts nylon at three to six months daily, polyester at four to eight, and an occasionally flown flag at one to three years. These figures are practical guidance, not a warranty, and exposure will move them considerably.

How the 4x6 Feet is built

A 4x6 foot flag's larger area, over half again a 3x5 Feet's, catches more wind and stresses the fly end harder. That is why it carries four rows of lock stitching rather than fewer.

The arithmetic behind that: 24 square feet of nylon at roughly two ounces a square yard. In a thirty mile an hour wind the fly end of a flag this size travels faster than the wind itself, because the wave running out to the tip accelerates as it goes. That is why the tip wears out first and why the stitching count at that end is the number worth reading on any listing.

One person can still manage this, though the first attempt on a windy day makes the extra size obvious. Take it down before the storm, not in the middle of it.

With lock stitching, every stitch knots into its neighbor, so damage stays contained at the break instead of running down the seam. Read 4 rows not as 4 times the strength but as 3 backups. Two solid brass grommets with tooth washers sit in a reinforced, inch and a half heavy duty white heading. Twenty four square feet puts genuine load on those two points.

This flag is commercial grade nylon, light enough to move in a gentle breeze, and it sheds water instead of soaking it up, drying fast — which matters, since a wet flag is a heavy flag that works its own seams harder. UV resistant, field tested ink is what stands between the flag and the sun, since sun is what fades a flag over time.

Why this flag is harder to make than most

A large bison silhouette is straightforward, but the seal branded on its flank is fine detail inside a shape, which is harder than a seal on an open field.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Wyoming flag placed 23, at 6.28 out of 10.

Will it fit my flagpole?

An in-ground flagpole between eighteen and twenty five feet is the right fit; a six foot house bracket will leave it dragging and wrapping.

Questions about the 4x6 Feet

What flagpole does a 4x6 foot flag need? An in-ground flagpole of eighteen to twenty five feet. It is too large for a standard house bracket, which is the honest reason to choose it.

Is a 4x6 foot flag worth it over a 3x5 foot flag? Only if the flagpole is tall enough. On a twenty foot flagpole a 3x5 foot flag looks lost and a 4x6 foot flag fills it. On a six foot bracket the 4x6 foot flag will wrap.

Can I fly a 4x6 foot state flag with a 4x6 foot United States flag? Yes, and on two flagpoles of equal height that is the correct pairing, with the United States flag to the viewer’s left.

Where the step up starts to cost you

The move from 3x5 Feet to 4x6 Feet is where cutting corners becomes expensive. More area means more force at the fly end and more load on the grommets, so a cheaply built 4x6 Feet fails faster than a cheaply built 3x5 Feet. This size is where construction quality actually matters.

Specifications

• Size: 4x6 Feet
• Area: 24 square feet
• Material: 100 percent nylon
• Fly end: 4 rows of lock stitching
• Heading: heavy duty white, reinforced, 1-1/2 inch
• Finish: Brass Grommets
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

The rule behind both tables below is that a flag’s length should run about a quarter to a third of the flagpole’s height. Where two sizes both fit, the smaller one flies more often and lasts longer, and the larger one reads from further away.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

The rule keeps holding above a hundred feet of flagpole, but the buying decision does not stay simple: the flag, the truck, the halyard, the foundation and the wind load now have to be specified as one engineered system, and a flag chosen without checking the flagpole rating puts the pole at risk before the flag. Some of the most recognizable flags in the country deliberately run larger than the rule, always with an engineer behind that call.

The full range is available to order even where a size is not shown on the site. If what you need is not listed here, ask and we can still get it made.

About the back of the flag

The back of a printed flag shows the design reversed, not missing. That is true of almost every flag in the country, and it is normal rather than a flaw. Getting both sides to read correctly means sewing two flags together with a liner between them, which roughly doubles the cost and the weight. Single sided is standard practice, and the right choice unless a particular state’s law says otherwise.

Flying it with the United States flag

Title 4, Section 7 of the United States Flag Code sets the rule: no flag flies above the United States flag, and none takes its place to the right at the same level, meaning the viewer’s left. Two equal-height flagpoles put the United States flag on the viewer’s left, with both flags matched in size. Unequal flagpoles put the United States flag on the taller one, and a single flagpole with two flags carries the United States flag at the top. Civilians are not bound by penalty under the Flag Code, but it remains the standard institutions follow.

Buy two and they both last longer

Keep two flags and swap them monthly. That single habit will outlast three flags run to destruction, since resting fabric recovers and the fly end is spared the repeated wear of constant flying. Take the flag down ahead of severe weather, since one bad storm night can outdo six calm months. Watch the fly end rather than the center; a little stitching early saves a whole season.

For cities, counties, schools and agencies

This is a flag we sell to municipalities, school districts, fire and police departments, courthouses and state agencies as standard business. Use the tax exempt page for a tax exempt account, and the contact page for quantity orders, a replacement schedule, or a size not shown on this listing.

Why buy it from us

We run a small American company and stock the flags we sell. Each one is made in the United States, printed in UV resistant ink, and built to the construction described above instead of built to hit a lower price. One durable flag beats three that fail, in our view. Free shipping applies to orders over twenty five dollars.