FORTISVEX Maine State Flag 6x10 Feet Nylon - Made in USA with Brass Grommets

Residential ends here. A 6x10 foot flag is sixty square feet of commercial flag for a commercial flagpole — and the last size still finished with grommets rather than a sewn rope.

This is the Maine state flag at 6x10 Feet (60 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the Maine flag specification

The Maine flag is set out in Maine Revised Statutes, Title 1, Section 206. It is the state coat of arms on a blue field.

Adopted February 23, 1909.

Maine says it in the statute itself. Title 1, Section 206 gives a fly of five feet six inches and four feet four inches on the staff with knotted yellow silk fringe, and then directs that a flag made to that description be kept in the office of the Adjutant General as a model. The law is describing one reference flag, not every flag sold.

This flag reproduces the design faithfully, built to the standard outdoor sizes used across the industry and bought by the states themselves. The colors, the seal and the emblems are the part that has to be right on an outdoor flag, and they are right here.

The law that defines it, in its own words

Maine Revised Statutes, Title 1, Section 206, State flag reads:

The flag to be known as the official flag of the State shall be of blue, of the same color as the blue field in the flag of the United States, and of the following dimensions and designs; to wit, the length or height of the staff to be 9 feet, including brass spearhead and ferrule; the fly of said flag to be 5 feet 6 inches, and to be 4 feet 4 inches on the staff; in the center of the flag there shall be embroidered in silk on both sides of the flag the coat of arms of the State, in proportionate size; the edges to be trimmed with knotted fringe of yellow silk, 2 1/2 inches wide; a cord, with tassels, to be attached to the staff at the spearhead, to be 8 feet 6 inches long and composed of white and blue silk strands. A flag made in accordance with the description given in this section shall be kept in the office of the Adjutant General as a model.

This is the operative text. A 2023 amendment to a pine tree design was contingent on a referendum, and voters rejected it as Question 5 on November 5, 2024, so the coat of arms flag remains the law.

You do not have to take our word for any of that. Read Maine Revised Statutes in full at the Maine Legislature, and check what we sell against it.

That is the flag as we build it. Nothing about it is approximate.

What is on it and what it means

The arms carry a farmer, a seaman, a moose, a pine tree, the North Star and the motto Dirigo, meaning I Lead.

What most listings get wrong

The buff Pine Tree flag you see on merchandise everywhere is not the official state flag. A referendum on November 5, 2024, Question 5, proposed restoring a version of it and failed, 55.71 percent against to 44.29 percent for. The 1909 coat of arms design remains the law. Maine also has a separate merchant and marine ensign from 1939, which is a third distinct thing.

Where the Maine flag flies

The widely publicized Flagpole of Freedom Park in Columbia Falls, a proposed one thousand four hundred and sixty one foot pole with a proposed three hundred and sixty by two hundred and eight foot flag, is an unbuilt and stalled proposal halted by a local moratorium.

Fly it on Maine’s birthday

Maine became the 23rd state on March 15, 1820. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Maine flag has an official reason to go up.

Order it ahead of the date and it is ready to fly that day. Every state’s birthday is listed on our state birthdays page.

Nylon or polyester in Maine

Nylon inland. Polyester on the rugged coast at Portland for salt, wind and freeze cycling.

This is a commercial flag at sixty square feet, and on the exposed sites named above, material choice separates a one-season flag from a three-season one.

The nylon is what you are looking at here — the right choice for the sheltered and moderate wind sites named above, for a house bracket, and for anywhere the flag comes down ahead of storms. Two things settle it. It is light enough to fly on an ordinary yard’s breeze rather than sag, and it dries fast, fighting mildew in humid conditions. What it gives up is resistance to ultraviolet — nylon’s amide bonds break under sun, costing strength and color faster than polyester, and it loses roughly a tenth of its strength while wet. If the site is one of the exposed ones above, the polyester version fits better.

Here is the part usually learned the hard way, after a second purchase: nylon catches wind on days polyester simply will not move. When the flag needs to be visibly flying — a quiet morning, a holiday, a funeral, a ceremony — that argues for nylon even on a site where polyester would technically last longer. A flag that just hangs there is not doing its job either.

Institutions commonly cite the American Legion’s figure: the federal government expects about ninety days from a flag flown daily sunrise to sunset, and roughly a quarter of that flown around the clock. On the ground, retailers report three to six months for nylon flown daily, four to eight for polyester, and one to three years for occasional flying. Take these as working estimates, not warranties — exposure can move them a long way in either direction.

How the 6x10 Feet is built

Six rows of lock stitching replace four at this size, because sixty square feet generates far more force at the fly end than any house flag experiences. Four rows would not hold.

The arithmetic behind that: 60 square feet of nylon at roughly two ounces a square yard. In a thirty mile an hour wind the fly end of a flag this size travels faster than the wind itself, because the wave running out to the tip accelerates as it goes. That is why the tip wears out first and why the stitching count at that end is the number worth reading on any listing.

Folding this properly takes two people and clear ground or a clean surface — sixty square feet will not fold neatly on a tailgate.

With lock stitching, every stitch knots into its neighbor, so damage stays contained at the break instead of running down the seam. Read 6 rows not as 6 times the strength but as 5 backups. At sixty square feet, the heading takes the most sustained strain of any part of the flag, which is why it runs two inches of reinforced heavy duty white with brass grommets and tooth washers.

Commercial grade nylon is the material in this flag. Light enough to catch a gentle breeze, it sheds water rather than holding onto it and dries fast, which keeps a flag from staying heavy and stressing its seams. The ink is UV resistant and field tested, since sun exposure is what determines how long the color lasts.

Why this flag is harder to make than most

Two human figures, a moose, a pine tree and a motto, all on blue. A seal-on-blue design at the expensive end of the range.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Maine flag placed 60, at 3.39 out of 10.

Will it fit my flagpole?

Thirty to forty feet of in-ground flagpole is the right pairing for this size.

Questions about the 6x10 Feet

What size flagpole for a 6x10 foot flag? Thirty to forty feet. At this size the flag is commercial and the flagpole has to be an in-ground pole with a truck and halyard.

Why does the 6x10 foot flag have grommets when the 8x12 foot flag has a rope? Sixty square feet is the most two brass grommets can be asked to carry. Above this the load is spread along a rope sewn the length of the heading.

Does a 6x10 foot flag need a heavier flagpole? A sixty square foot flag in a gust loads a flagpole hard. If the pole was sold for a 4x6 foot or 5x8 foot flag, check its rating before stepping up.

The last size on grommets

Past this size, construction shifts entirely to a sewn rope the length of the heading, since two grommets cannot carry the load any further. The 6x10 Feet sits exactly at that boundary — six rows of stitching, a two inch heading, and still grommets.

Specifications

• Size: 6x10 Feet
• Area: 60 square feet
• Material: 100 percent nylon
• Fly end: 6 rows of lock stitching
• Heading: heavy duty white, reinforced, 2 inch
• Finish: Brass Grommets
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

Both tables come down to one ratio: the flag’s length wants to be a quarter to a third of the flagpole’s height. When a size sits on the border between two rows, the smaller flag will fly on more days and outlast the bigger one, while the bigger flag is the one people notice from further off.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

Above roughly a hundred feet of flagpole, the quarter to a third guide keeps its accuracy but loses its simplicity: the flag now has to be specified alongside the truck, the halyard, the foundation and the wind load as a single system, and skipping that step is how a flagpole gets damaged rather than the flag. Several famous installations fly flags larger than the rule on purpose, with an engineer deciding it rather than a table.

We do not limit ourselves to what is listed on the site. The full range above is available to order, and an unlisted size can still be supplied.

About the back of the flag

It is normal for a printed flag to read backward from behind — almost every flag flown in America works this way. A flag that reads correctly from both sides is double sided: two flags sewn together with a liner, at roughly double the weight and cost. Single sided stays the standard and the right choice except where a state’s own law requires the double sided build.

Flying it with the United States flag

Title 4, Section 7 of the Flag Code is the source for this. The United States flag is never subordinate in position — nothing flies above it, and nothing takes its place at the viewer’s left when flags are level with each other. On matched flagpoles, the United States flag takes the viewer’s left and the flags should be sized the same; on unequal flagpoles, it goes on the taller one; and on a single pole flying two flags, it goes at the top. There is no penalty for civilians who do not follow the Code, but institutions treat it as the standard regardless.

Buy two and they both last longer

The simplest way to make a flag last is to own two and rotate them monthly — that alone outlasts three flags flown to failure, because rest lets the fabric recover and the fly end is not hammered day after day. Take it down ahead of real storms, since one bad night of wind can undo six good months. Watch the fly end, where fraying starts, and a quick repair there is worth a whole extra season.

For cities, counties, schools and agencies

We regularly supply state flags to cities, school districts, fire and police departments, courthouses and state agencies. Tax exempt accounts run through the tax exempt page. Quantity pricing, replacement schedules, or a size that is not listed all go through the contact page.

Why buy it from us

We are a small, American-based company that stocks what it lists. Every flag is made in the United States, uses UV resistant ink, and is finished to the standard described above rather than cut down to hit a price. One flag that lasts is worth more to us than three that do not. Free shipping applies over twenty five dollars.