FORTISVEX

FORTISVEX Wisconsin State Flag 3x5 Feet Nylon - Made in USA with Brass Grommets

(1 review) Write a Review
MPN:
FPAMSTWINYL3x5G
Availability:
Free Shipping*
Shipping:
Calculated at Checkout
$50.60
Frequently bought together:

Description

The 3x5 foot flag is the one most people mean when they say flag. It is the default house size, it fits the bracket that came with the house, and it is the size replaced most often in America.

This is the Wisconsin state flag at 3x5 Feet (15 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the Wisconsin flag specification

The Wisconsin flag is set out in Wisconsin Statutes Section 1.08, at a two to three proportion. It is the state coat of arms on royal blue, with the word Wisconsin above and the date 1848 below.

Originally 1863 and standardized in 1913; the word Wisconsin and the date 1848 were added by Chapter 286, Laws of 1979, mandatory for flags made on or after May 1, 1981.

This statute sets the design, the colors and the seal or emblem, without pinning down a size for an outdoor flag. That is how most states have written their flag laws, and it explains why every manufacturer uses the same standard sizes.

The reproduction here is faithful to the design, in the standard outdoor sizes used industry wide and bought by the states themselves. On an outdoor flag, correct colors, seal and emblems are what counts, and that is what you get.

The law that defines it, in its own words

Wisconsin Statutes Section 1.08 reads:

(1) The Wisconsin state flag consists of the following features: (a) Relative dimensions of 2 to 3, hoist to fly. (b) A background of royal blue cloth. (c) The state coat of arms, as described under s. 1.07, in material of appropriate colors, applied on each side in the center of the field, of such size that, if placed in a circle whose diameter is equal to 50 percent of the hoist, those portions farthest from the center of the field would meet, but not cross, the boundary of the circle. (d) The word "WISCONSIN" in white, capital, condensed Gothic letters, one-eighth of the hoist in height, centered above the coat of arms, midway between the uppermost part of the coat of arms and the top edge of the flag. (e) The year "1848" in white, condensed Gothic numbers, one-eighth of the hoist in height, centered below the coat of arms, midway between the lowermost part of the coat of arms and the bottom edge of the flag. (f) Optional trim on the edges consisting of yellow knotted fringe. (2) The department of administration shall ensure that all official state flags that are manufactured on or after May 1, 1981 conform to the requirements of this section. State flags manufactured before May 1, 1981 may continue to be used as state flags.

The emblem itself is defined by reference to the coat of arms at Section 1.07, so these words are the frame and not the whole picture.

You do not have to take our word for any of that. Read Wisconsin Statutes Section 1.08 in full at the Wisconsin Legislature, and check what we sell against it.

That is the flag we build, not a rough version of it.

What is on it and what it means

A sailor and a miner represent labor on water and on land. The shield quarters agriculture, mining, manufacturing and navigation. The crest is a badger and the motto is Forward.

Worth knowing about this flag

The lettering was added for a specific reason. Without it the flag was nearly indistinguishable from several other blue seal flags at a distance, and that is why the 1979 act required it.

Where the Wisconsin flag flies

The Acuity Insurance flagpole in Sheboygan is the tallest flagpole in the United States at four hundred feet, erected in 2014. It weighs approximately four hundred and twenty thousand pounds, uses three pendulum style tuned mass dampers to reduce movement and vibration, and is designed to withstand a low temperature of minus forty two degrees. The current flag is seventy by one hundred and forty feet. The original was sixty by one hundred and twenty. Flags fly about a hundred and twenty to a hundred and thirty days before retirement, and a heavier flag is used in harsh weather.

Fly it on Wisconsin’s birthday

Wisconsin became the 30th state on May 29, 1848. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Wisconsin flag has an official reason to go up.

Buy it in time and it goes up on the day it matters. Every state’s date is on our state birthdays page.

Nylon or polyester in Wisconsin

Nylon inland at Madison. Polyester on the Lake Michigan shore at Milwaukee and Green Bay.

For scale, the National Weather Service ultraviolet index forecast for Milwaukee on July 23, 2026 was 9 at solar noon, in the very high band. That is the sun this flag has to survive.

This is a house flag, fifteen square feet, where the material determines whether it flies in a light breeze and how fast it dries once it rains.

The nylon is what you are looking at here — the right choice for the sheltered and moderate wind sites named above, for a house bracket, and for anywhere the flag comes down ahead of storms. Two things settle it. It is light enough to fly on an ordinary yard’s breeze rather than sag, and it dries fast, fighting mildew in humid conditions. What it gives up is resistance to ultraviolet — nylon’s amide bonds break under sun, costing strength and color faster than polyester, and it loses roughly a tenth of its strength while wet. If the site is one of the exposed ones above, the polyester version fits better.

There is one more factor, and most people only discover it after buying the wrong material once: a nylon flag moves on days a polyester flag stays limp. If it matters to you that the flag is actually flying on a still morning, a holiday, at a funeral, at a ceremony, that favors nylon even where polyester would outlast it. A flag hanging motionless has failed at its job too.

The working benchmark most institutions use comes from the American Legion, which reports that the United States government expects a flag flown daily from sunrise to sunset to last about ninety days, and one flown around the clock about a quarter of that. Retailer experience runs three to six months for nylon and four to eight for polyester flown daily, and one to three years for a flag flown only on occasions. Those are working figures, not a warranty, and exposure moves them a long way in either direction.

How the 3x5 Feet is built

Most 3x5 foot flags fail at the fly end early, because this size is bought on price more than any other. The difference between a season and three seasons is four rows of lock stitching there.

Work the numbers and you get 15 square feet of nylon at roughly two ounces a square yard. At thirty miles an hour, the fly end actually outpaces the wind, because the wave running to the tip accelerates along the way — the reason the tip fails first, and the reason fly-end stitching count is the number that matters.

One person puts it up and takes it down. It folds into a drawer. If you are rotating two flags monthly, this is the size where that habit costs you nothing but a minute.

A lock stitch ties into the stitch next to it, so one broken thread does not unzip the whole seam — it just stops. 4 rows is not 4 times the strength; it is 3 backups. The heading is heavy duty white and reinforced, an inch and a half wide, with two solid brass grommets. Fifteen square feet is enough sail area to work the grommets hard on a windy site.

This is commercial grade nylon: light enough to fly in a light wind, quick to shed water instead of holding it, and fast to dry, which matters because a waterlogged flag is a heavier flag putting more strain on its seams. UV resistant, field tested ink is what fights the sun, which is the real driver of color loss over time.

Why this flag is harder to make than most

Two human figures, a quartered shield, a badger crest and two lines of added lettering. The lettering is what makes it identifiable and it is also more to print.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Wisconsin flag placed 65, at 3.16 out of 10.

Will it fit my flagpole?

It suits a five or six foot house bracket, or an in-ground flagpole of fifteen to twenty feet. That is the most common residential setup in the country and this is the size built for it.

Questions about the 3x5 Feet

What size flagpole does a 3x5 foot flag need? A six foot house bracket, or an in-ground flagpole of fifteen to twenty feet. It is the most common residential pairing in the country.

How long does a 3x5 foot nylon flag last outside? The federal working figure is about ninety days for a flag flown daily from sunrise to sunset, and about a quarter of that flown around the clock. Retailers commonly see three to six months in daily use and one to three years flown on occasions only.

Is this flag printed or sewn? The design is printed in UV resistant ink on one side and reads through in reverse on the back, which is how nearly every state flag sold in the country is made. The construction, the heading, the stitching and the grommets are sewn.

Why this size gets replaced most

There is nothing weaker about the 3x5 foot flag itself — it is just the size most often bought on price, and built to match. A cheap one with one or two rows of stitching on the fly end frays inside a season and is six inches shorter within two. The construction is what separates the two.

Specifications

  • Size: 3x5 Feet
  • Area: 15 square feet
  • Material: 100 percent nylon
  • Fly end: 4 rows of lock stitching
  • Heading: heavy duty white, reinforced, 1-1/2 inch
  • Finish: Brass Grommets
  • Ink: UV resistant, field tested
  • Made in the United States by FORTISVEX

Which size do I need?

Both tables come down to one ratio: the flag’s length wants to be a quarter to a third of the flagpole’s height. When a size sits on the border between two rows, the smaller flag will fly on more days and outlast the bigger one, while the bigger flag is the one people notice from further off.

If you know your flagpole height, start here.

  • 6 Feet house bracket: 2x3 Feet or 3x5 Feet
  • 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
  • 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
  • 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
  • 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
  • 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
  • 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
  • 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
  • 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
  • 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
  • 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
  • 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
  • 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

  • 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
  • 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
  • 4x6 Feet: 18 to 25 Feet in-ground flagpole
  • 5x8 Feet: 25 to 35 Feet flagpole
  • 6x10 Feet: 30 to 40 Feet flagpole
  • 8x12 Feet: 40 to 50 Feet flagpole
  • 10x15 Feet: 50 to 60 Feet flagpole
  • 12x18 Feet: 60 to 80 Feet flagpole
  • 15x25 Feet: 80 to 100 Feet flagpole
  • 20x30 Feet: 100 to 120 Feet flagpole
  • 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
  • 30x50 Feet: 150 to 200 Feet flagpole
  • 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
  • 50x80 Feet: 240 Feet and above, engineered to the flagpole

The quarter to a third rule holds all the way up, but above about a hundred feet the flag and the flagpole stop being two purchases and become one engineered system: the truck, the halyard, the foundation and the wind load all have to be specified together, and a flag bought without checking the flagpole rating damages the flagpole first. Several famous installations deliberately fly longer than the rule, which is a choice made with an engineer rather than from a chart.

We carry the full range whether or not every size appears on this website. If the size you need is not listed, we can still supply it.

About the back of the flag

A printed flag's reverse face is a mirror image of the front, and that is standard, not a fault — it describes most of the flags flown across the country. Double sided construction, which reads correctly from either face, sews two flags together with a liner and roughly doubles both weight and price. Single sided remains standard, and correct, unless a state's statute specifically calls for double sided.

Flying it with the United States flag

Title 4, Section 7 of the United States Flag Code sets the rule: no flag flies above the United States flag, and none takes its place to the right at the same level, meaning the viewer’s left. Two equal-height flagpoles put the United States flag on the viewer’s left, with both flags matched in size. Unequal flagpoles put the United States flag on the taller one, and a single flagpole with two flags carries the United States flag at the top. Civilians are not bound by penalty under the Flag Code, but it remains the standard institutions follow.

Buy two and they both last longer

Two flags, alternated month to month, beat three flags flown until they fall apart, because the material recovers on its days off and the fly end is not worked in the same place every day. Severe weather is the one time to take it down; a real windstorm can cost more in one night than six ordinary months of flying. Fraying starts at the fly end, not the middle, and a few minutes with a needle there adds a season.

For cities, counties, schools and agencies

We supply state flags to municipalities, school districts, fire and police departments, courthouses and state agencies. Tax exempt accounts are handled through the tax exempt page. For quantities, replacement schedules or sizes not listed, use the contact page.

Why buy it from us

Small and American describes this company, and we stock what we list. Every flag is made in the United States, printed with UV resistant ink, and finished to the construction described above rather than to a price target. We’d rather sell one flag that holds up than three that don’t. Free shipping on orders over twenty five dollars.

View AllClose

Additional Information

Material Type:
Commercial Nylon
Flag Size:
3x5 Feet
Made in:
USA
Finish:
Brass Grommets
View AllClose

1 Review

  • 5

    Wisconsin State Flag

    Posted by Janan Vinger on Jul 26th 2019

    3x5 Nylon WI state flag is just great! It flies nicely in a slight wind. Colors are bright. Very nice product. Would readily recommend it.

View AllClose