Tennessee 12x18 Feet Nylon State Flag Made in USA

Large civic sites, memorial grounds and highway locations fly the 12x18 foot flag for the same reason: two hundred and sixteen square feet is visible from a long way off, which is the point of it.

This is the Tennessee state flag at 12x18 Feet (216 square feet) in nylon, made in the United States and finished with a sewn rope and plated steel thimbles.

Built to the Tennessee flag specification

The Tennessee flag is set out in Chapter 498 of the Public Acts of 1905, at a proportion of three to five. It is a crimson field with three white stars in a blue circle, and a vertical blue bar bordered by white at the fly.

Designed by Colonel LeRoy Reeves of the Third Regiment, Tennessee Infantry, and adopted April 17, 1905.

The design, the colors and the seal or emblem are set by statute; the size of a modern outdoor flag is not. That is the case in most of the country, and it is why manufacturers across the industry all build to the same standard sizes.

The design here is reproduced faithfully, at the standard outdoor sizes the whole industry works in and that states buy for themselves. What actually matters on a flag flown outdoors is that the colors, the seal and the emblems are correct, and they are.

The law that defines it, in its own words

Tennessee Code Section 4-1-301, subsection (a) reads:

(a) The flag or banner of this state shall be of the following design, colors and proportions, to wit: an oblong flag or banner in length one and two-thirds (1 2/3) times its width, the principal field of same to be of color red, but the flag or banner ending at its free or outer end in a perpendicular bar of blue, of uniform width, running from side to side, that is to say, from top to bottom of the flag or banner, and separated from the red field by a narrow margin or stripe of white of uniform width; the width of the white stripe to be one-fifth (1/5) that of the blue bar; and the total width of the bar and stripe together to be equal to one-eighth (1/8) of the width of the flag. In the center of the red field shall be a smaller circular field of blue, separated from the surrounding red field by a circular margin or stripe of white of uniform width and of the same width as the straight margin or stripe first mentioned. The breadth or diameter of the circular blue field, exclusive of the white margin, shall be equal to one-half (1/2) of the width of the flag. Inside the circular blue field shall be three (3) five-pointed stars of white distributed at equal intervals around a point, the center of the blue field, and of such size and arrangement that one (1) point of each star shall approach as closely as practicable without actually touching one (1) point of each of the other two (2) around the center point of the field; and the two (2) outer points of each star shall approach as nearly as practicable without actually touching the periphery of the blue field. The arrangement of the three (3) stars shall be such that the centers of no two (2) stars shall be in a line parallel to either the side or end of the flag, but intermediate between same; and the highest star shall be the one nearest the upper confined corner of the flag.

Subsection (b) makes it an offense to knowingly manufacture or sell a state flag that does not comply with this design, and subsection (c) requires every Tennessee flag to carry markings showing the correct way to fly it. Ours does.

You do not have to take our word for any of that. Read Tennessee Code Section 4-1-301 in full at FindLaw, and check what we sell against it.

This is what we actually make, not a stand-in for it.

What is on it and what it means

Reeves wrote it down himself. The three stars are the three Grand Divisions, East, Middle and West, bound together by the endless circle, an indissoluble trinity. The blue bar at the fly relieves the sameness of the crimson field.

What most listings get wrong

The three stars do not mean Tennessee was the third state after the original thirteen. Reeves rejected that reading personally, and it is still the most repeated claim about this flag. The bar at the fly is functional, so a limp flag still shows all three colors, not symbolic.

Where the Tennessee flag flies

Camping World in Sevierville flies a forty by eighty foot flag on a hundred and thirty foot pole. The City of Sevierville sued in 2025 because zoning caps poles at forty four feet. Well documented but not an adjudicated state record, and it is one of several identical installations nationwide.

Fly it on Tennessee’s birthday

Tennessee became the 16th state on June 1, 1796. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Tennessee flag has an official reason to go up.

Order ahead and this flag is ready for the day. The complete list of state birthdays lives on our state birthdays page.

Nylon or polyester in Tennessee

Nylon statewide at Nashville, Memphis, Knoxville and Chattanooga. Polyester where severe storm wind is highest.

For scale, the National Weather Service ultraviolet index forecast for Memphis on July 23, 2026 was 7 at solar noon, in the high band. That is the sun this flag has to survive.

At two hundred and sixteen square feet this is an installation flag. The sites above that call for polyester call for it absolutely, and the flagpole has to be engineered for the load.

You are looking at the nylon here, the right pick for the sheltered and moderate wind sites named above, for any house bracket, and for anywhere the flag gets brought in during storms. Two things make that case. It is light enough to move on the breeze most yards actually get rather than hang limp, and it dries fast, which keeps mildew away in a humid climate. What it trades away is ultraviolet durability — nylon’s amide bonds break down under ultraviolet light, losing strength and color faster than polyester, and it loses roughly a tenth of its strength while wet. For one of the exposed sites named above, the polyester version is the better fit.

There is one more factor, and most people only discover it after buying the wrong material once: a nylon flag moves on days a polyester flag stays limp. If it matters to you that the flag is actually flying on a still morning, a holiday, at a funeral, at a ceremony, that favors nylon even where polyester would outlast it. A flag hanging motionless has failed at its job too.

The number most institutions rely on traces to the American Legion, which reports a roughly ninety-day expectation from the federal government for a flag flown daily sunrise to sunset, and about a quarter of that flown around the clock. Retailer experience puts nylon at three to six months daily, polyester at four to eight, and an occasionally flown flag at one to three years. These figures are practical guidance, not a warranty, and exposure will move them considerably.

How the 12x18 Feet is built

Six rows of stitching and zig zag corners at this size are not decorative choices — they manage a load a house flag could not survive for one afternoon.

Work the numbers and you get 216 square feet of nylon at roughly two ounces a square yard. At thirty miles an hour, the fly end actually outpaces the wind, because the wave running to the tip accelerates along the way — the reason the tip fails first, and the reason fly-end stitching count is the number that matters.

Two hundred and sixteen square feet is not an errand you fit in casually. Schedule it, account for the site, and never attempt it on a day the wind is already up.

With lock stitching, every stitch knots into its neighbor, so damage stays contained at the break instead of running down the seam. Read 6 rows not as 6 times the strength but as 5 backups. Rather than concentrate the load, the heading spreads it across the entire hoist through a full-length sewn nylon rope ending in two plated steel thimbles. One reinforced grommet also sits at the center of the heading as a secondary attachment point.

The material here is commercial grade nylon. Its lightness lets it fly on a gentle breeze, it sheds rather than absorbs water, and it dries quickly, sparing the seams the extra weight and strain of staying wet. Field tested UV resistant ink handles the part that actually determines fade life: sun exposure.

A design that reproduces cleanly

A circle, three stars and a fly bar. No seal and no lettering, which is why it rates well and costs little.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Tennessee flag placed 14, at 6.98 out of 10.

Will it fit my flagpole?

A sixty to eighty foot in-ground flagpole, hardware rated accordingly, suits a flag this size.

Questions about the 12x18 Feet

What size flagpole for a 12x18 foot flag? Sixty to eighty feet with hardware engineered for two hundred and sixteen square feet of load.

Who buys a 12x18 foot state flag? Civic sites, memorial grounds, highway frontages and campuses, anywhere the flag is meant to be seen from a long way off.

Does a flag this size need special care? It needs a rotation, hardware checks, and taking down in severe weather. Flown properly it lasts. Flown carelessly it does not last a season.

This size is a commitment

A flag this large is a scheduled maintenance item rather than something you put up and forget. It wants a rotation, it wants the hardware checked, and it wants taking down in severe weather. Flown properly it lasts. Flown carelessly it does not last a season.

Specifications

• Size: 12x18 Feet
• Area: 216 square feet
• Material: 100 percent nylon
• Fly end: 6 rows of lock stitching
• Heading: heavy duty white, reinforced, 2 inch
• Finish: Rope, Thimbles and Center Grommet
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

Underneath both tables is a single ratio: a flag a quarter to a third the flagpole’s height. When you land between two rows, that is a real choice, not a rounding error — smaller flies more often, bigger reads further.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

Above roughly a hundred feet of flagpole, the quarter to a third guide keeps its accuracy but loses its simplicity: the flag now has to be specified alongside the truck, the halyard, the foundation and the wind load as a single system, and skipping that step is how a flagpole gets damaged rather than the flag. Several famous installations fly flags larger than the rule on purpose, with an engineer deciding it rather than a table.

The website does not show every size we can supply. If yours is missing from the listing, the full range above is still available to order.

About the back of the flag

A printed flag's reverse face is a mirror image of the front, and that is standard, not a fault — it describes most of the flags flown across the country. Double sided construction, which reads correctly from either face, sews two flags together with a liner and roughly doubles both weight and price. Single sided remains standard, and correct, unless a state's statute specifically calls for double sided.

Flying it with the United States flag

This is governed by the United States Flag Code, Title 4, Section 7: the United States flag always outranks every other flag in position, never displayed below it or to its right at the same level — right from the viewer’s side, that is. Two flagpoles of equal height place the United States flag at the viewer’s left with both flags the same size; if the poles differ in height, it goes on the taller pole; on one pole flying two flags, it sits at the top. The Flag Code carries no penalty for private citizens, but institutions treat it as the standard.

Buy two and they both last longer

Keep two flags and swap them monthly. That single habit will outlast three flags run to destruction, since resting fabric recovers and the fly end is spared the repeated wear of constant flying. Take the flag down ahead of severe weather, since one bad storm night can outdo six calm months. Watch the fly end rather than the center; a little stitching early saves a whole season.

For cities, counties, schools and agencies

Cities, school districts, fire and police departments, courthouses and state agencies buy state flags from us as a matter of routine. The tax exempt page is where a tax exempt account is set up; the contact page is where quantity orders, replacement schedules, and sizes not shown here get handled.

Why buy it from us

A small American company runs this store, and everything listed here is something we actually stock. Every flag is made in the United States, printed in UV resistant ink, and built to the construction described above rather than built down to a price. We would rather one flag last than sell three that fail early. Free shipping kicks in over twenty five dollars.