FORTISVEX Oregon State Flag 4x6 Feet Nylon - Made in USA with Brass Grommets

The 4x6 foot flag is where a house bracket stops being enough. It needs an in-ground flagpole, and that is the real reason people move up to it — not appearance, just size.

This is the Oregon state flag at 4x6 Feet (24 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the Oregon flag specification

The Oregon flag is set out in Oregon Revised Statutes Section 186.010, with the seal at Section 186.020 and official colors of navy blue and gold. It is the obverse carries the state escutcheon in gold with 33 stars, the words State of Oregon above and 1859 below; the reverse carries a gold beaver.

Adopted February 26, 1925.

The law governing this flag addresses design, colors and the seal or emblem, but leaves overall size unspecified for a modern outdoor flag. That is typical across most states, which is why the industry has converged on the same standard sizes.

This flag reproduces the design faithfully, built to the standard outdoor sizes used across the industry and bought by the states themselves. The colors, the seal and the emblems are the part that has to be right on an outdoor flag, and they are right here.

The law that defines it, in its own words

Oregon Revised Statutes Section 186.010 reads:

(1) A state flag is adopted to be used on all occasions when the state is officially and publicly represented, with the privilege of use by all citizens upon such occasions as may be fitting and appropriate. It shall bear on one side on a navy blue field the state escutcheon in gold, supported by 33 gold stars and bearing above the escutcheon the words "State of Oregon" in gold and below the escutcheon the figures "1859" in gold, and on the other side on a navy blue field a representation of the beaver in gold. (2) The official colors of the State of Oregon are navy blue and gold.

Both the obverse and the reverse are in words.

You do not have to take our word for any of that. Read Oregon Revised Statutes Section 186.010 in full at the Oregon Legislature, and check what we sell against it.

This is the actual flag we manufacture, not an approximation.

What is on it and what it means

The escutcheon shows mountains, an elk, a covered wagon, and the Pacific with a departing British man-of-war and an arriving American steamer, above the word The Union. The 33 stars mark Oregon as the 33rd state. The beaver is the state animal and the fur trade.

What most listings get wrong

A real Oregon flag is two flags sewn together. Any single-sided Oregon flag, with the seal showing through backwards on the reverse, is not the flag the statute describes.

It is the only state flag in the United States with a different design on each side, a distinction it shares only with the national flag of Paraguay.

Where the Oregon flag flies

Dan Kirkman's Baskin Robbins in Grants Pass flies a forty by sixty foot flag on a pole taller than a hundred and fifty feet, called by KTVL the largest flag in southern Oregon and possibly the entire state. A prior benchmark was Crater Lake Ford in Medford at a hundred and twenty five feet flying a thirty by sixty foot flag.

Fly it on Oregon’s birthday

Oregon became the 33rd state on February 14, 1859. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Oregon flag has an official reason to go up.

Buy it in time and it goes up on the day it matters. Every state’s date is on our state birthdays page.

Nylon or polyester in Oregon

Nylon in the sheltered Willamette Valley at Portland, Salem and Eugene. Polyester on the coast and in the Columbia River Gorge, a world class wind corridor.

Twenty four square feet is where wind load starts to matter in earnest, and the verdict above carries more weight here than on a standard house flag.

The nylon is what you are looking at here — the right choice for the sheltered and moderate wind sites named above, for a house bracket, and for anywhere the flag comes down ahead of storms. Two things settle it. It is light enough to fly on an ordinary yard’s breeze rather than sag, and it dries fast, fighting mildew in humid conditions. What it gives up is resistance to ultraviolet — nylon’s amide bonds break under sun, costing strength and color faster than polyester, and it loses roughly a tenth of its strength while wet. If the site is one of the exposed ones above, the polyester version fits better.

The part most buyers learn only the second time around: nylon flies in wind too light to move polyester. When it matters that the flag is actually moving — a still morning, a holiday, a funeral, a ceremony — that favors nylon even somewhere polyester would last longer. A flag that hangs motionless is not doing its job either, however durable it is.

The benchmark institutions generally lean on comes from the American Legion: the federal government's own expectation is about ninety days for a daily sunrise-to-sunset flag, and roughly a quarter of that flying around the clock. Retailers report three to six months for nylon flown daily, four to eight months for polyester, and one to three years for occasional flying. Treat those as working estimates rather than a warranty, since exposure can shift them a great deal.

How the 4x6 Feet is built

With well over half again the area of a 3x5 foot flag, a 4x6 Feet catches proportionally more wind, and the fly end pays for it. It carries four rows of lock stitching, and needs every one.

Here is the arithmetic: 24 square feet of nylon at roughly two ounces a square yard. A thirty mile an hour wind sends the fly end moving faster than the wind itself, since the wave traveling toward the tip picks up speed as it goes — which is why the tip wears out first, and why the fly end's stitching count is the figure to check on any listing.

This remains a one person task, but a windy afternoon spent taking it down alone will show you the difference from a 3x5 Feet. Handle it before weather arrives.

Lock stitching means each stitch is knotted into the next, so a broken thread stops where it broke rather than unzipping the seam. 4 rows does not mean 4 times the strength; it means 3 backups. The heading is reinforced heavy duty white, an inch and a half, with brass grommets and tooth washers taking a real load across twenty four square feet.

The flag material is commercial grade nylon. It is light enough to fly in a gentle breeze, it sheds water rather than holding it, and it dries fast, which matters because a flag that stays wet stays heavy and works its seams harder. The ink is UV resistant and field tested; sun is what takes a flag’s color, and the ink decides how long it holds.

Why this flag is harder to make than most

This is the only genuinely double-sided state flag, which means two printed or appliqued faces and usually a light-blocking liner between them. It is heavier, costlier and slower to make than any other state flag, and there is no way around it.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Oregon flag placed 62, at 3.30 out of 10.

Will it fit my flagpole?

Eighteen to twenty five feet of in-ground flagpole suits this size. A standard six foot house bracket will have it dragging and wrapping instead.

Questions about the 4x6 Feet

What flagpole does a 4x6 foot flag need? An in-ground flagpole of eighteen to twenty five feet. It is too large for a standard house bracket, which is the honest reason to choose it.

Is a 4x6 foot flag worth it over a 3x5 foot flag? Only if the flagpole is tall enough. On a twenty foot flagpole a 3x5 foot flag looks lost and a 4x6 foot flag fills it. On a six foot bracket the 4x6 foot flag will wrap.

Can I fly a 4x6 foot state flag with a 4x6 foot United States flag? Yes, and on two flagpoles of equal height that is the correct pairing, with the United States flag to the viewer’s left.

Where the step up starts to cost you

Going from a 3x5 foot flag to a 4x6 foot flag is where buying cheap begins to be expensive. The extra area means more force at the fly end and more load on the grommets, so a 4x6 Feet built to a budget fails faster than a 3x5 Feet built the same way. This is the size where construction stops being a nicety.

Specifications

• Size: 4x6 Feet
• Area: 24 square feet
• Material: 100 percent nylon
• Fly end: 4 rows of lock stitching
• Heading: heavy duty white, reinforced, 1-1/2 inch
• Finish: Brass Grommets
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

One rule sits under both tables: the flag should run about a quarter to a third the height of the flagpole. On the border between two rows, the smaller flag flies more and lasts longer; the larger one is the one you can see from the road.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

The rule keeps holding above a hundred feet of flagpole, but the buying decision does not stay simple: the flag, the truck, the halyard, the foundation and the wind load now have to be specified as one engineered system, and a flag chosen without checking the flagpole rating puts the pole at risk before the flag. Some of the most recognizable flags in the country deliberately run larger than the rule, always with an engineer behind that call.

If a size in either table is missing from the website, it does not mean we do not carry it. The full range is available to order regardless of what is currently listed.

About the back of the flag

A single sided printed flag shows its design correctly on one face and reversed on the other. That is expected, and it describes almost every flag flying in the United States. A flag readable on both sides is built as two layers sewn around a liner, roughly double the cost and double the weight of a single sided flag. Unless a state’s law requires double sided, single sided remains the standard choice.

Flying it with the United States flag

Title 4, Section 7 of the United States Flag Code sets the rule: no flag flies above the United States flag, and none takes its place to the right at the same level, meaning the viewer’s left. Two equal-height flagpoles put the United States flag on the viewer’s left, with both flags matched in size. Unequal flagpoles put the United States flag on the taller one, and a single flagpole with two flags carries the United States flag at the top. Civilians are not bound by penalty under the Flag Code, but it remains the standard institutions follow.

Buy two and they both last longer

Keep two flags and swap them monthly. That single habit will outlast three flags run to destruction, since resting fabric recovers and the fly end is spared the repeated wear of constant flying. Take the flag down ahead of severe weather, since one bad storm night can outdo six calm months. Watch the fly end rather than the center; a little stitching early saves a whole season.

For cities, counties, schools and agencies

Cities, school districts, fire and police departments, courthouses and state agencies buy state flags from us as a matter of routine. The tax exempt page is where a tax exempt account is set up; the contact page is where quantity orders, replacement schedules, and sizes not shown here get handled.

Why buy it from us

We run a small American company and stock the flags we sell. Each one is made in the United States, printed in UV resistant ink, and built to the construction described above instead of built to hit a lower price. One durable flag beats three that fail, in our view. Free shipping applies to orders over twenty five dollars.