FORTISVEX Alabama State Flag 5x8 Feet Nylon - Made in USA with Brass Grommets

The 5x8 foot flag belongs on a thirty foot commercial flagpole — a dealership, a bank, a fire station, a church, a school. It also suits a homeowner whose flagpole is too tall for a 4x6 foot flag to fill properly.

This is the Alabama state flag at 5x8 Feet (40 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the Alabama flag specification

The Alabama flag is set out in Alabama Code Section 1-2-5. It is a crimson St. Andrew’s cross, a saltire, on a white field, with the bars required to be not less than six inches broad.

Adopted February 16, 1895 by Act 383, introduced by its designer, Representative John W. A. Sanford Jr.

Alabama Code Section 1-2-5 says nothing about the overall size or even the shape. The only absolute measurement in it is that the saltire bars be not less than six inches broad, which on a small flag is proportionally impossible to satisfy and has never once been enforced. The Attorney General addressed the shape question in 1987 and concluded that where the statute is silent, precedent and practice govern.

This flag reproduces the design faithfully, built to the standard outdoor sizes used across the industry and bought by the states themselves. The colors, the seal and the emblems are the part that has to be right on an outdoor flag, and they are right here.

The law that defines it, in its own words

Code of Alabama Section 1-2-5 reads:

The flag of the State of Alabama shall be a crimson cross of St. Andrew on a field of white. The bars forming the cross shall be not less than six inches broad, and must extend diagonally across the flag from side to side.

You do not have to take our word for any of that. Read Code of Alabama Section 1-2-5 in full at Justia, and check what we sell against it.

It is the real flag we produce, not a simplified version.

What is on it and what it means

The statute itself describes only a crimson saltire on white. It carries no seal and no lettering, which is why it reads clearly from a distance at every size.

What most listings get wrong

Because the statute sets a minimum bar width of six inches, a very small flag technically does not meet the legal definition. That is a curiosity rather than a problem, but it is the kind of detail nobody else on the internet mentions.

Where the Alabama flag flies

A thirty eight by twenty foot flag on a seventy foot pole at Camp Liberty in Cullman County is billed only as Cullman County's largest, not a statewide record.

Fly it on Alabama’s birthday

Alabama became the 22nd state on December 14, 1819. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Alabama flag has an official reason to go up.

Have it on hand before the date arrives and it is on the flagpole in time. The full state-by-state list is on our state birthdays page.

Nylon or polyester in Alabama

Nylon inland at Birmingham, Montgomery, Huntsville and Tuscaloosa. Polyester on the Gulf Coast at Mobile for salt, humidity and hurricane exposure.

Take any flag down for tornado and tropical events.

For scale, the National Weather Service ultraviolet index forecast for Mobile on July 23, 2026 was 11 at solar noon, in the extreme band. That is the sun this flag has to survive.

The heading takes real load at forty square feet in any gust, and the exposed sites above will reveal the difference between nylon and polyester within a season.

What you have here is the nylon, appropriate for the sheltered and moderate wind sites listed above, for any house bracket, and for anywhere the flag is brought down during storms. Two things decide it: it is light, flying on an ordinary breeze rather than going limp, and it dries fast, which is the defense against mildew in humidity. The trade is ultraviolet durability — nylon’s amide bonds break under sun, fading and weakening faster than polyester, and it loses about a tenth of its strength wet. For an exposed site on the list above, the polyester version is worth a look instead.

One more consideration, learned by most people only after a repeat purchase: a nylon flag moves in conditions where polyester hangs still. If the flag needs to actually be flying — a calm morning, a holiday, a funeral, a ceremony — that is an argument for nylon even on a site where polyester would technically outlast it. A flag that just hangs there has failed just as much as one that frays.

The number most institutions rely on traces to the American Legion, which reports a roughly ninety-day expectation from the federal government for a flag flown daily sunrise to sunset, and about a quarter of that flown around the clock. Retailer experience puts nylon at three to six months daily, polyester at four to eight, and an occasionally flown flag at one to three years. These figures are practical guidance, not a warranty, and exposure will move them considerably.

How the 5x8 Feet is built

Forty square feet is real work for a flag, and this one fails where everyone can see it. A frayed tip on a business flagpole shows from the road — which is exactly why the flag is flying.

Here is the arithmetic: 40 square feet of nylon at roughly two ounces a square yard. A thirty mile an hour wind sends the fly end moving faster than the wind itself, since the wave traveling toward the tip picks up speed as it goes — which is why the tip wears out first, and why the fly end's stitching count is the figure to check on any listing.

At this size, two people beat one, especially in wind. Forty square feet of loose fabric catches wind mid-fold if you are working alone.

A lock stitch ties into the stitch next to it, so one broken thread does not unzip the whole seam — it just stops. 4 rows is not 4 times the strength; it is 3 backups. The heading widens to two inches here, heavy duty white and reinforced, with two solid brass grommets and tooth washers. Forty square feet in a gust is a serious pull on a heading, and the extra half inch is not decoration.

The material here is commercial grade nylon. Its lightness lets it fly on a gentle breeze, it sheds rather than absorbs water, and it dries quickly, sparing the seams the extra weight and strain of staying wet. Field tested UV resistant ink handles the part that actually determines fade life: sun exposure.

A design that reproduces cleanly

Two colors and no seal. It is one of the cheapest state flags to build well and one of the most durable, because there is no fine detail to crack or fade unevenly.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Alabama flag placed 29, at 6.06 out of 10.

Will it fit my flagpole?

It suits an in-ground flagpole of twenty five to thirty five feet. This is the standard commercial pairing.

Questions about the 5x8 Feet

What size flagpole for a 5x8 foot flag? Twenty five to thirty five feet in the ground, which is the standard commercial flagpole. This is the size on most dealerships, banks and fire stations.

Should a business choose nylon or polyester at 5x8 Feet? Nylon flies more often and looks better on a calm day. Polyester lasts longer on an open, windy or coastal site. The section above names which your state is.

How often does a 5x8 foot commercial flag need replacing? A flag flown daily on an exposed commercial flagpole is typically replaced two to four times a year. A rotation of two flags swapped monthly stretches that.

What the condition of it says

The flag is the first thing anyone driving past a business actually sees, before the building itself. A faded, frayed flag says something about that business — a cost entirely separate from what it takes to replace it.

Specifications

• Size: 5x8 Feet
• Area: 40 square feet
• Material: 100 percent nylon
• Fly end: 4 rows of lock stitching
• Heading: heavy duty white, reinforced, 2 inch
• Finish: Brass Grommets
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

Underneath both tables is a single ratio: a flag a quarter to a third the flagpole’s height. When you land between two rows, that is a real choice, not a rounding error — smaller flies more often, bigger reads further.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

The rule keeps holding above a hundred feet of flagpole, but the buying decision does not stay simple: the flag, the truck, the halyard, the foundation and the wind load now have to be specified as one engineered system, and a flag chosen without checking the flagpole rating puts the pole at risk before the flag. Some of the most recognizable flags in the country deliberately run larger than the rule, always with an engineer behind that call.

Every size in both tables can be ordered, listed here or not. If the size you want does not appear on the website, contact us and we can still supply it.

About the back of the flag

Hold a printed flag up to the light and the reverse side shows the design in mirror image. That is not a defect — it is how nearly every flag flown in America is made. A flag correct on both sides is a double sided flag, two flags sewn together around a liner, and it runs roughly double the price and double the weight. Unless a state’s own statute calls for it, single sided is standard and it is the right call.

Flying it with the United States flag

Governing this is Title 4, Section 7 of the United States Flag Code, which keeps the United States flag in the position of honor: never below another flag, never to the right of one at the same level, meaning never right of the viewer’s left. Two flagpoles at equal height put the United States flag at the viewer’s left with equal-sized flags; unequal heights put it on the taller pole; a single flagpole with two flags carries it at the top. No penalty attaches for private citizens under the Code, but it is what institutions follow as standard practice.

Buy two and they both last longer

Buy two flags and swap them every month. That habit alone outlasts three flags flown into the ground, since the material recovers while resting and the fly end is not repeatedly stressed in the same place. Take the flag down for real storms; overnight wind damage can exceed six months of ordinary wear. Inspect the fly end rather than the middle, and a few minutes of repair stitching when fraying starts buys another season.

For cities, counties, schools and agencies

Cities, school districts, fire and police departments, courthouses and state agencies buy state flags from us as a matter of routine. The tax exempt page is where a tax exempt account is set up; the contact page is where quantity orders, replacement schedules, and sizes not shown here get handled.

Why buy it from us

We are a small company based in America, and we keep in stock what we sell. Every flag is made domestically, printed in UV resistant ink, and finished to the construction described above rather than scaled down to a price. Selling a flag that lasts matters more to us than selling three that don’t. Orders over twenty five dollars ship free.