FORTISVEX Indiana State Flag 5x8 Feet Nylon - Made in USA with Brass Grommets

The 5x8 foot flag belongs on a thirty foot commercial flagpole — a dealership, a bank, a fire station, a church, a school. It also suits a homeowner whose flagpole is too tall for a 4x6 foot flag to fill properly.

This is the Indiana state flag at 5x8 Feet (40 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the Indiana flag specification

The Indiana flag is set out in Indiana Code Section 1-2-2-1. It is a gold torch surrounded by nineteen stars on blue, with the word Indiana above.

Designed by Paul Hadley through a Daughters of the American Revolution contest and adopted May 31, 1917 as the state banner for the 1916 centennial; the legislature’s only change to Hadley’s design was adding the word Indiana.

The statute for this flag describes the design, the colors and the seal or emblem, but it does not fix an overall size that a modern outdoor flag has to match. That is the normal position across most of the country, and it is why every manufacturer builds state flags in the same standard sizes.

Faithfully reproduced, that is the standard we hold this design to, at the outdoor sizes the whole industry uses and states themselves order. What an outdoor flag needs right is the color, the seal and the emblems, and this one has them right.

The law that defines it, in its own words

Indiana Code Section 1-2-2-1 reads:

A state flag is hereby adopted, and the same shall be of the following design and dimensions, to-wit: Its dimensions shall be three (3) feet fly by two (2) feet hoist; or five (5) feet fly by three (3) feet hoist; or any size proportionate to either of those dimensions. The field of the flag shall be blue with nineteen (19) stars and a flaming torch in gold or buff. Thirteen (13) stars shall be arranged in an outer circle, representing the original thirteen (13) states; five (5) stars shall be arranged in a half circle below the torch and inside the outer circle of stars, representing the states admitted prior to Indiana; and the nineteenth star, appreciably larger than the others and representing Indiana shall be placed above the flame of the torch. The outer circle of stars shall be so arranged that one (1) star shall appear directly in the middle at the top of the circle, and the word "Indiana" shall be placed in a half circle over and above the star representing Indiana and midway between it and the star in the center above it. Rays shall be shown radiating from the torch to the three (3) stars on each side of the star in the upper center of the circle.

You do not have to take our word for any of that. Read Indiana Code Section 1-2-2-1 in full at the Indiana Historical Bureau, and check what we sell against it.

It is the real flag we produce, not a simplified version.

What is on it and what it means

The torch is liberty and enlightenment and its rays are a far-reaching influence. The thirteen outer stars are the original states. The five inner stars are the next five admitted. The single large star above the torch marks Indiana as the nineteenth state.

What most listings get wrong

It is still technically the state banner in the wording of the original act, not the state flag, though the code treats it as the flag.

Where the Indiana flag flies

Glenbrook Dodge in Fort Wayne. The original pole of about two hundred and thirty one feet, raised in 2001, snapped in a storm on December 23, 2022. A two hundred and thirteen foot replacement was raised on July 2, 2024, flying a fifty by eighty foot flag. The installer called the original the second tallest flagpole in the United States,.

Fly it on Indiana’s birthday

Indiana became the 19th state on December 11, 1816. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Indiana flag has an official reason to go up.

Indiana Day is December 11, a legal holiday under which the Indiana Code directs the governor to issue an annual proclamation and state schools to hold commemorative events.

Order it ahead of the date and it is ready to fly that day. Every state’s birthday is listed on our state birthdays page.

Nylon or polyester in Indiana

Nylon statewide at Indianapolis, Fort Wayne and Evansville, except polyester in the open storm prone northwest near the lake.

At this size, forty square feet, gusts load the heading for real, and an exposed site above will make the material difference obvious inside a season.

This is the nylon listing, suited to the sheltered and moderate wind sites named above, to any house bracket, and to anywhere you bring the flag in during storms. Two factors drive that choice. Nylon is light, catching the breeze most yards actually get instead of hanging still, and it dries quickly, which is what keeps mildew at bay in humid air. The cost is ultraviolet life: nylon’s amide bonds absorb and break under ultraviolet exposure, fading faster than polyester, and it loses about a tenth of its strength wet. On one of the exposed sites named above, look instead at the polyester version.

There is one more factor, and most people only discover it after buying the wrong material once: a nylon flag moves on days a polyester flag stays limp. If it matters to you that the flag is actually flying on a still morning, a holiday, at a funeral, at a ceremony, that favors nylon even where polyester would outlast it. A flag hanging motionless has failed at its job too.

Most institutions work from the same benchmark, reported by the American Legion: the United States government's expectation is roughly ninety days for a flag flown daily sunrise to sunset, and about a quarter of that for one flown around the clock. In practice, retailers report three to six months for nylon flown daily, four to eight for polyester, and one to three years for a flag flown only on occasions. These are working numbers, not a guarantee, and exposure can move them substantially either way.

How the 5x8 Feet is built

At this size the flag works hard, and any failure happens in public: a frayed tip on a business flagpole reads from the road, the same place the flag was meant to be seen from.

Here is the arithmetic: 40 square feet of nylon at roughly two ounces a square yard. A thirty mile an hour wind sends the fly end moving faster than the wind itself, since the wave traveling toward the tip picks up speed as it goes — which is why the tip wears out first, and why the fly end's stitching count is the figure to check on any listing.

Two people is easier than one at this size, particularly on a windy site. Forty square feet of loose material catches wind while you are folding it.

Lock stitching means each stitch is knotted into the next, so a broken thread stops where it broke rather than unzipping the seam. 4 rows does not mean 4 times the strength; it means 3 backups. The heading widens to two inches here, heavy duty white and reinforced, with two solid brass grommets and tooth washers. Forty square feet in a gust is a serious pull on a heading, and the extra half inch is not decoration.

This flag is commercial grade nylon, light enough to move in a gentle breeze, and it sheds water instead of soaking it up, drying fast — which matters, since a wet flag is a heavy flag that works its own seams harder. UV resistant, field tested ink is what stands between the flag and the sun, since sun is what fades a flag over time.

A design that reproduces cleanly

A torch, nineteen stars and lettering, but no seal. That puts it well ahead of most states for durability and cost.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Indiana flag placed 32, at 5.77 out of 10.

Will it fit my flagpole?

An in-ground flagpole of twenty five to thirty five feet is the pairing most commercial sites use for this size.

Questions about the 5x8 Feet

What size flagpole for a 5x8 foot flag? Twenty five to thirty five feet in the ground, which is the standard commercial flagpole. This is the size on most dealerships, banks and fire stations.

Should a business choose nylon or polyester at 5x8 Feet? Nylon flies more often and looks better on a calm day. Polyester lasts longer on an open, windy or coastal site. The section above names which your state is.

How often does a 5x8 foot commercial flag need replacing? A flag flown daily on an exposed commercial flagpole is typically replaced two to four times a year. A rotation of two flags swapped monthly stretches that.

What the condition of it says

Anyone driving past a business sees the flag before they see the building. A faded, frayed flag outside a place of business says something about the business, and it is a different kind of cost from the price of replacing it.

Specifications

• Size: 5x8 Feet
• Area: 40 square feet
• Material: 100 percent nylon
• Fly end: 4 rows of lock stitching
• Heading: heavy duty white, reinforced, 2 inch
• Finish: Brass Grommets
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

The rule that governs both tables is a length-to-height ratio of about one quarter to one third. Borderline cases favor the smaller size if you want it flying often and lasting, or the larger size if the point is to be seen from a distance.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

The rule keeps holding above a hundred feet of flagpole, but the buying decision does not stay simple: the flag, the truck, the halyard, the foundation and the wind load now have to be specified as one engineered system, and a flag chosen without checking the flagpole rating puts the pole at risk before the flag. Some of the most recognizable flags in the country deliberately run larger than the rule, always with an engineer behind that call.

We do not limit ourselves to what is listed on the site. The full range above is available to order, and an unlisted size can still be supplied.

About the back of the flag

The back of a printed flag shows the design reversed, not missing. That is true of almost every flag in the country, and it is normal rather than a flaw. Getting both sides to read correctly means sewing two flags together with a liner between them, which roughly doubles the cost and the weight. Single sided is standard practice, and the right choice unless a particular state’s law says otherwise.

Flying it with the United States flag

Section 7 of Title 4, the United States Flag Code, addresses this directly: the United States flag is never outranked in position, staying above every other flag and to the right at the same level, which reads as the viewer’s left. Same-height flagpoles put the United States flag on the viewer’s left with matching flag sizes; different heights put it on the taller pole; one flagpole with two flags puts it at the top. There is no legal penalty for civilians under the Flag Code, but it is what every institution follows anyway.

Buy two and they both last longer

Two flags, alternated month to month, beat three flags flown until they fall apart, because the material recovers on its days off and the fly end is not worked in the same place every day. Severe weather is the one time to take it down; a real windstorm can cost more in one night than six ordinary months of flying. Fraying starts at the fly end, not the middle, and a few minutes with a needle there adds a season.

For cities, counties, schools and agencies

Fire and police departments, school districts, courthouses, municipalities and state agencies are all regular buyers of our state flags. Tax exempt purchasing is set up through the tax exempt page, and quantities, replacement schedules or an unlisted size are handled through the contact page.

Why buy it from us

A small American company runs this store, and everything listed here is something we actually stock. Every flag is made in the United States, printed in UV resistant ink, and built to the construction described above rather than built down to a price. We would rather one flag last than sell three that fail early. Free shipping kicks in over twenty five dollars.