FORTISVEX

FORTISVEX Vermont State Flag 6x10 Feet Nylon - Made in USA with Brass Grommets

(No reviews yet) Write a Review
MPN:
FPAMSTVTNYL6x10G
Availability:
Free Shipping* https://fortisvex.com/shipping-returns-terms/
Shipping:
Calculated at Checkout
$237.53
Frequently bought together:

Description

Once you reach 6x10 feet you have left house flags behind. Sixty square feet is commercial size for a commercial flagpole, and this is the last size built with grommets before the construction switches to rope.

This is the Vermont state flag at 6x10 Feet (60 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the Vermont flag specification

The Vermont flag is set out in Vermont Statutes Annotated, Title 1, Section 495, with the arms at Section 491. It is a blue field with the state coat of arms.

Adopted June 1, 1923, making it Vermont’s third flag; the earlier two both closely resembled the United States flag.

The law governing this flag addresses design, colors and the seal or emblem, but leaves overall size unspecified for a modern outdoor flag. That is typical across most states, which is why the industry has converged on the same standard sizes.

We reproduce that design faithfully, in the standard outdoor flag sizes the whole industry uses and that the states themselves buy. What matters on an outdoor flag is that the colors, the seal and the emblems are right, and they are.

The law that defines it, in its own words

Vermont Statutes, Title 1, Section 495 reads:

The flag of the State shall be blue with the Coat of Arms of the State thereon.

The arms are defined in words at Section 491, by reference.

You do not have to take our word for any of that. Read Vermont Statutes in full at the Vermont Legislature, and check what we sell against it.

That is the flag we build, not a rough version of it.

What is on it and what it means

The arms show a pine tree, a cow, three wheat sheaves and mountains, with a buck’s head crest and the motto Freedom and Unity.

What most listings get wrong

Vermont’s first two flags looked so much like the national flag that they were replaced specifically to end the confusion.

Where the Vermont flag flies

The original Bennington flag, one of the oldest surviving Stars and Stripes with its distinctive seventy six, is displayed at the Bennington Museum. Modern scholarship dates the surviving artifact to the early 1800s rather than to the 1777 battle, so describe it as one of the oldest surviving American flags rather than as a confirmed 1777 relic.

Fly it on Vermont’s birthday

Vermont became the 14th state on March 4, 1791. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Vermont flag has an official reason to go up.

Have it on hand before the date arrives and it is on the flagpole in time. The full state-by-state list is on our state birthdays page.

Nylon or polyester in Vermont

Nylon in sheltered valleys at Burlington. Polyester on exposed ridgelines.

For scale, the National Weather Service ultraviolet index forecast for Burlington on July 23, 2026 was 7 at solar noon, in the high band. That is the sun this flag has to survive.

Sixty square feet makes this a commercial flag, and on an exposed site from the list above, the right material is the difference between one season and three.

This is the nylon listing, suited to the sheltered and moderate wind sites named above, to any house bracket, and to anywhere you bring the flag in during storms. Two factors drive that choice. Nylon is light, catching the breeze most yards actually get instead of hanging still, and it dries quickly, which is what keeps mildew at bay in humid air. The cost is ultraviolet life: nylon’s amide bonds absorb and break under ultraviolet exposure, fading faster than polyester, and it loses about a tenth of its strength wet. On one of the exposed sites named above, look instead at the polyester version.

There is one more factor, and most people only discover it after buying the wrong material once: a nylon flag moves on days a polyester flag stays limp. If it matters to you that the flag is actually flying on a still morning, a holiday, at a funeral, at a ceremony, that favors nylon even where polyester would outlast it. A flag hanging motionless has failed at its job too.

The benchmark institutions generally lean on comes from the American Legion: the federal government's own expectation is about ninety days for a daily sunrise-to-sunset flag, and roughly a quarter of that flying around the clock. Retailers report three to six months for nylon flown daily, four to eight months for polyester, and one to three years for occasional flying. Treat those as working estimates rather than a warranty, since exposure can shift them a great deal.

How the 6x10 Feet is built

This is the size where the stitching goes to six rows on the fly end rather than four. Sixty square feet generates far more force at the tip than a house flag ever will, and four rows is no longer enough.

Work the numbers and you get 60 square feet of nylon at roughly two ounces a square yard. At thirty miles an hour, the fly end actually outpaces the wind, because the wave running to the tip accelerates along the way — the reason the tip fails first, and the reason fly-end stitching count is the number that matters.

Folding this properly takes two people and clear ground or a clean surface — sixty square feet will not fold neatly on a tailgate.

With lock stitching, every stitch knots into its neighbor, so damage stays contained at the break instead of running down the seam. Read 6 rows not as 6 times the strength but as 5 backups. The heading is two inches of heavy duty white, reinforced, with two solid brass grommets and tooth washers. At this size the heading is the part under the most sustained strain.

This is commercial grade nylon: light enough to fly in a light wind, quick to shed water instead of holding it, and fast to dry, which matters because a waterlogged flag is a heavier flag putting more strain on its seams. UV resistant, field tested ink is what fights the sun, which is the real driver of color loss over time.

Why this flag is harder to make than most

A landscape shield with a pine tree, livestock and sheaves, topped by a buck’s head. Fine natural detail on blue, which is the expensive combination.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Vermont flag placed 61, at 3.37 out of 10.

Will it fit my flagpole?

This size wants an in-ground flagpole between thirty and forty feet.

Questions about the 6x10 Feet

What size flagpole for a 6x10 foot flag? Thirty to forty feet. At this size the flag is commercial and the flagpole has to be an in-ground pole with a truck and halyard.

Why does the 6x10 foot flag have grommets when the 8x12 foot flag has a rope? Sixty square feet is the most two brass grommets can be asked to carry. Above this the load is spread along a rope sewn the length of the heading.

Does a 6x10 foot flag need a heavier flagpole? A sixty square foot flag in a gust loads a flagpole hard. If the pole was sold for a 4x6 foot or 5x8 foot flag, check its rating before stepping up.

The last size on grommets

Everything above this is finished with a rope sewn the full length of the heading rather than two grommets, because two points can no longer carry the load. The 6x10 foot flag sits right at that boundary, which is why it runs six rows of stitching and a two inch heading while still using grommets.

Specifications

  • Size: 6x10 Feet
  • Area: 60 square feet
  • Material: 100 percent nylon
  • Fly end: 6 rows of lock stitching
  • Heading: heavy duty white, reinforced, 2 inch
  • Finish: Brass Grommets
  • Ink: UV resistant, field tested
  • Made in the United States by FORTISVEX

Which size do I need?

Both tables follow the same logic. A flagpole reads best with a flag whose length falls between a quarter and a third of its height. Where a size could go either way, smaller means more flying days and a longer life, bigger means more visibility at range.

If you know your flagpole height, start here.

  • 6 Feet house bracket: 2x3 Feet or 3x5 Feet
  • 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
  • 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
  • 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
  • 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
  • 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
  • 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
  • 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
  • 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
  • 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
  • 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
  • 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
  • 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

  • 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
  • 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
  • 4x6 Feet: 18 to 25 Feet in-ground flagpole
  • 5x8 Feet: 25 to 35 Feet flagpole
  • 6x10 Feet: 30 to 40 Feet flagpole
  • 8x12 Feet: 40 to 50 Feet flagpole
  • 10x15 Feet: 50 to 60 Feet flagpole
  • 12x18 Feet: 60 to 80 Feet flagpole
  • 15x25 Feet: 80 to 100 Feet flagpole
  • 20x30 Feet: 100 to 120 Feet flagpole
  • 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
  • 30x50 Feet: 150 to 200 Feet flagpole
  • 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
  • 50x80 Feet: 240 Feet and above, engineered to the flagpole

The proportion still applies past a hundred feet, but the decision changes character: the flagpole, the truck, the halyard, the foundation and the wind load stop being separate line items and become one engineered whole, and ordering a flag without confirming the flagpole rating puts the flagpole at risk first. A few famous flags fly deliberately larger than the rule suggests, and all of them do it with engineering behind the choice.

We supply the whole range shown above, whether or not a given size currently has its own listing on the site. Ask if you do not see it.

About the back of the flag

The back of a printed flag shows the design reversed, not missing. That is true of almost every flag in the country, and it is normal rather than a flaw. Getting both sides to read correctly means sewing two flags together with a liner between them, which roughly doubles the cost and the weight. Single sided is standard practice, and the right choice unless a particular state’s law says otherwise.

Flying it with the United States flag

The United States Flag Code, at Title 4, Section 7, sets this out: the United States flag holds the position of honor, never below another flag and never displaced from the viewer’s left when flags fly level. With two flagpoles of matching height, the United States flag takes the viewer’s left and the flags match in size; with unequal heights, it goes on the taller pole; on a single pole carrying two flags, it is at the top. The Code has no penalty attached for civilians, but it remains the standard every institution follows.

Buy two and they both last longer

One flag flown month after month wears faster at the same point every time; two flags rotated monthly outlast three run to failure, because rest lets fabric recover. Bring the flag in ahead of severe weather — a hard storm overnight can outdo six normal months. And check the fly end first, since that is where fraying starts, and a small stitch repair there is worth a full extra season.

For cities, counties, schools and agencies

This is a flag we sell to municipalities, school districts, fire and police departments, courthouses and state agencies as standard business. Use the tax exempt page for a tax exempt account, and the contact page for quantity orders, a replacement schedule, or a size not shown on this listing.

Why buy it from us

We run a small American company and stock the flags we sell. Each one is made in the United States, printed in UV resistant ink, and built to the construction described above instead of built to hit a lower price. One durable flag beats three that fail, in our view. Free shipping applies to orders over twenty five dollars.

View AllClose

Additional Information

Material Type:
Commercial Nylon
Flag Size:
6x10 Feet
Made in:
USA
Finish:
Brass Grommets
View AllClose