FORTISVEX

FORTISVEX Utah State Flag 4x6 Feet Nylon - Made in USA with Brass Grommets

(No reviews yet) Write a Review
MPN:
FPAMSTUTNYL4x6G
Availability:
Free Shipping* https://fortisvex.com/shipping-returns-terms/
Shipping:
Calculated at Checkout
  • Utah 4'x6' Nylon State Flag 4ftx6ft
  • FORTISVEX Utah State Flag 4x6 Feet Nylon - Made in USA with Brass Grommets
  • FORTISVEX Utah State Flag 4x6 Feet Nylon - Made in USA with Brass Grommets
  • FORTISVEX Utah State Flag 4x6 Feet Nylon - Made in USA with Brass Grommets
  • FORTISVEX Utah State Flag 4x6 Feet Nylon - Made in USA with Brass Grommets
  • FORTISVEX Utah State Flag 4x6 Feet Nylon - Made in USA with Brass Grommets
$78.30
Frequently bought together:

Description

A 4x6 foot flag is the first size that really needs a flagpole in the ground. It is too large for a standard house bracket, and that is the honest reason to step up to it rather than any question of appearance.

This is the Utah state flag at 4x6 Feet (24 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the Utah flag specification

The Utah flag is set out in Senate Bill 31 of 2023, signed March 21, 2023 and effective March 9, 2024, Utah State Flag Day, 113 years after the 1911 original. It is horizontal bands of blue, white and red, with the white forming mountain peaks, and a gold hexagon containing a gold beehive and a white five-pointed star.

Adopted through the 2022 More Than A Flag campaign, which drew 7,031 total submissions including 5,702 flag designs, 2,500 of them from students, from all 29 counties.

Design, colors and the seal or emblem are what this state's statute defines; a fixed size for an outdoor flag is not among them. Most of the country works the same way, and that is why manufacturers all build to the same standard sizes.

What we build is a faithful reproduction of that design, sized to the standard outdoor sizes every manufacturer uses and the states themselves order in. On an outdoor flag, the colors, the seal and the emblems are what has to be right, and here they are.

The law that defines it, in its own words

Utah Code Section 63G-1-501, State flag, Description, Image, Display reads:

(1) The state flag of Utah shall be a rectangle that has a width to length ratio of three to five and contain the following: (a) two irregular, horizontal lines dividing the flag into three separate segments, of which: (i) the top segment: (A) is located above the higher horizontal line; and (B) is shaded in blue; (ii) the middle segment: (A) is located between the two horizontal lines; (B) is shaded in white; (C) at the higher horizontal line, takes the shape of a mountain with five peaks, the center peak being the tallest and following the shape of the highest point of the hexagon described in Subsection (1)(b); and (D) at the lower horizontal line, follows the shape of the lowest point of the hexagon described in Subsection (1)(b); and (iii) the bottom segment: (A) is located below the lower horizontal line; and (B) is shaded in red; (b) one hexagon that: (i) is shaded in blue; (ii) contains a smaller gold hexagon outline; and (iii) is placed within the center of the middle segment described in Subsection (1)(a)(ii); (c) one beehive that: (i) is shaded in gold; (ii) contains five hive sections with a small semicircle removed from the center of the base of the lowest section; and (iii) is placed within the center of the hexagon described in Subsection (1)(b); and (d) one five-pointed Utah star that: (i) is shaded in white; and (ii) is placed below the center of the beehive described in Subsection (1)(c).

The prior 1911 flag is retained as the historic state flag under Section 63G-1-503.

You do not have to take our word for any of that. Read Utah Code Section 63G-1-501 in full at the Utah Legislature, and check what we sell against it.

This is the flag we make. Not an approximation of it.

What is on it and what it means

The beehive is industry and community, and the settler arrival of 1847. The hexagon is the people’s strength and unity. The star marks statehood in 1896. Red is southern Utah’s red rock, white the mountains and snow, blue the sky.

What most listings get wrong

The pre-2024 seal-on-blue flag is now the historic flag. It still flies at the Capitol but it is not the state flag. Some sources date this design to 2023 because it was signed then, but it became official March 9, 2024.

This flag is new. It took effect March 9, 2024, and the seal flag it replaced is now designated the historic flag.

Where the Utah flag flies

By the governor's 2023 executive order, Utah's historic state flag flies continuously atop the State Capitol, above the new state flag when both are flown together, and both fly on separate poles on the Capitol grounds daily. Big Betsy, seventy eight by one hundred and fifty feet and about four hundred pounds, was made by Colonial Flag Company of Sandy and is flown by the nonprofit Follow the Flag over Grove Creek Canyon in Pleasant Grove each Fourth of July since 2017. It is documented as the largest free flying United States flag in existence, larger than the George Washington Bridge flag.

Fly it on Utah’s birthday

Utah became the 45th state on January 4, 1896. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Utah flag has an official reason to go up.

Get it now so it is flying on the day itself. See every state’s birthday on our state birthdays page.

Nylon or polyester in Utah

Nylon in the sheltered Wasatch Front valleys at Salt Lake City and Provo. Polyester in the high desert and canyon wind zones, and at St. George for ultraviolet.

Wind load becomes a real factor at twenty four square feet, and the verdict above matters more at this size than it does for a 3x5 Feet house flag.

This listing is the nylon. It is the right choice for the sheltered and moderate wind sites named above, on any house bracket, and anywhere the flag comes down in storms. Two things decide that. Nylon is light, so it flies on the breeze most yards actually get instead of hanging limp, and it dries fast, which is what fights mildew in a humid climate. What it gives up is ultraviolet life: nylon’s amide bonds absorb ultraviolet and break, so under hard sun it loses strength and color faster than polyester, and it loses roughly a tenth of its strength while it is wet. If your site is one of the exposed ones above, look at the polyester version of this flag instead.

There is one more factor, and most people only discover it after buying the wrong material once: a nylon flag moves on days a polyester flag stays limp. If it matters to you that the flag is actually flying on a still morning, a holiday, at a funeral, at a ceremony, that favors nylon even where polyester would outlast it. A flag hanging motionless has failed at its job too.

The benchmark institutions generally lean on comes from the American Legion: the federal government's own expectation is about ninety days for a daily sunrise-to-sunset flag, and roughly a quarter of that flying around the clock. Retailers report three to six months for nylon flown daily, four to eight months for polyester, and one to three years for occasional flying. Treat those as working estimates rather than a warranty, since exposure can shift them a great deal.

How the 4x6 Feet is built

The extra area on a 4x6 foot flag — more than half again a 3x5 Feet's — means more wind caught and a harder-working fly end. Four rows of lock stitching, all four earning their place.

Work the numbers and you get 24 square feet of nylon at roughly two ounces a square yard. At thirty miles an hour, the fly end actually outpaces the wind, because the wave running to the tip accelerates along the way — the reason the tip fails first, and the reason fly-end stitching count is the number that matters.

This remains a one person task, but a windy afternoon spent taking it down alone will show you the difference from a 3x5 Feet. Handle it before weather arrives.

Each lock stitch knots into the one beside it, so a broken thread stays broken right where it snapped instead of unraveling the whole seam. 4 rows is not 4 times the strength — it is 3 backups. Two solid brass grommets with tooth washers sit in a reinforced, inch and a half heavy duty white heading. Twenty four square feet puts genuine load on those two points.

The material here is commercial grade nylon. Its lightness lets it fly on a gentle breeze, it sheds rather than absorbs water, and it dries quickly, sparing the seams the extra weight and strain of staying wet. Field tested UV resistant ink handles the part that actually determines fade life: sun exposure.

A design that reproduces cleanly

A clean geometric design replacing a detailed seal. It costs less to make than the flag it replaced and it will last considerably longer.

Will it fit my flagpole?

An in-ground flagpole between eighteen and twenty five feet is the right fit; a six foot house bracket will leave it dragging and wrapping.

Questions about the 4x6 Feet

What flagpole does a 4x6 foot flag need? An in-ground flagpole of eighteen to twenty five feet. It is too large for a standard house bracket, which is the honest reason to choose it.

Is a 4x6 foot flag worth it over a 3x5 foot flag? Only if the flagpole is tall enough. On a twenty foot flagpole a 3x5 foot flag looks lost and a 4x6 foot flag fills it. On a six foot bracket the 4x6 foot flag will wrap.

Can I fly a 4x6 foot state flag with a 4x6 foot United States flag? Yes, and on two flagpoles of equal height that is the correct pairing, with the United States flag to the viewer’s left.

Where the step up starts to cost you

Going from a 3x5 foot flag to a 4x6 foot flag is where buying cheap begins to be expensive. The extra area means more force at the fly end and more load on the grommets, so a 4x6 Feet built to a budget fails faster than a 3x5 Feet built the same way. This is the size where construction stops being a nicety.

Specifications

  • Size: 4x6 Feet
  • Area: 24 square feet
  • Material: 100 percent nylon
  • Fly end: 4 rows of lock stitching
  • Heading: heavy duty white, reinforced, 1-1/2 inch
  • Finish: Brass Grommets
  • Ink: UV resistant, field tested
  • Made in the United States by FORTISVEX

Which size do I need?

The proportion that makes both tables work is simple: length equal to roughly a quarter to a third of the flagpole’s height. Sitting between two sizes is common, and the choice there is really a trade between a flag that flies often and one that is seen from a distance.

If you know your flagpole height, start here.

  • 6 Feet house bracket: 2x3 Feet or 3x5 Feet
  • 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
  • 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
  • 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
  • 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
  • 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
  • 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
  • 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
  • 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
  • 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
  • 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
  • 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
  • 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

  • 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
  • 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
  • 4x6 Feet: 18 to 25 Feet in-ground flagpole
  • 5x8 Feet: 25 to 35 Feet flagpole
  • 6x10 Feet: 30 to 40 Feet flagpole
  • 8x12 Feet: 40 to 50 Feet flagpole
  • 10x15 Feet: 50 to 60 Feet flagpole
  • 12x18 Feet: 60 to 80 Feet flagpole
  • 15x25 Feet: 80 to 100 Feet flagpole
  • 20x30 Feet: 100 to 120 Feet flagpole
  • 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
  • 30x50 Feet: 150 to 200 Feet flagpole
  • 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
  • 50x80 Feet: 240 Feet and above, engineered to the flagpole

The ratio does not fail at a hundred feet, but the transaction does change: past that height the flag, the flagpole, the truck, the halyard and the foundation have to be engineered together, and a flag ordered without checking the flagpole rating tends to cost the flagpole first. A few of the country’s best known flags deliberately exceed the rule, on the strength of an engineer’s calculation rather than a chart.

We do not limit ourselves to what is listed on the site. The full range above is available to order, and an unlisted size can still be supplied.

About the back of the flag

Hold a printed flag up to the light and the reverse side shows the design in mirror image. That is not a defect — it is how nearly every flag flown in America is made. A flag correct on both sides is a double sided flag, two flags sewn together around a liner, and it runs roughly double the price and double the weight. Unless a state’s own statute calls for it, single sided is standard and it is the right call.

Flying it with the United States flag

The United States Flag Code, Title 4, Section 7, governs this. No other flag goes above the United States flag, or to its right when on the same level, which is the viewer’s left. On two flagpoles of the same height the United States flag takes the viewer’s left and both flags should be the same size. If the flagpoles differ in height, the United States flag goes on the taller one. On a single flagpole carrying two flags the United States flag goes at the top. The Flag Code is advisory for civilians and carries no penalty, but it is the standard every institution follows.

Buy two and they both last longer

Alternate two flags on a monthly schedule and you will get more life from both than from three flags flown until they wear out, because resting fabric recovers and the fly end stops absorbing the same repeated stress. A severe storm is the one condition worth taking the flag down for; it can do more damage in a night than six calm months. The fly end frays first, not the center, and stitching it early adds a season.

For cities, counties, schools and agencies

This is a flag we sell to municipalities, school districts, fire and police departments, courthouses and state agencies as standard business. Use the tax exempt page for a tax exempt account, and the contact page for quantity orders, a replacement schedule, or a size not shown on this listing.

Why buy it from us

This company is small and American, and what is on the site is in stock. Every flag here is made in the United States, uses UV resistant ink, and is built to the construction described above rather than priced down to a cheaper build. We would rather you buy one flag that lasts than replace three that do not. Orders over twenty five dollars get free shipping.

View AllClose

Additional Information

Material Type:
Commercial Nylon
Flag Size:
4x6 Feet
Made in:
USA
Finish:
Brass Grommets
View AllClose