FORTISVEX Tennessee State Flag 3x5 Feet Nylon - Made in USA with Brass Grommets

Ask someone to picture a flag and this is usually the size in their head. It matches the bracket most houses already have, and no other size gets replaced as often across the country.

This is the Tennessee state flag at 3x5 Feet (15 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the Tennessee flag specification

The Tennessee flag is set out in Chapter 498 of the Public Acts of 1905, at a proportion of three to five. It is a crimson field with three white stars in a blue circle, and a vertical blue bar bordered by white at the fly.

Designed by Colonel LeRoy Reeves of the Third Regiment, Tennessee Infantry, and adopted April 17, 1905.

What the statute here fixes is the design, the colors and the seal or emblem; it does not fix a size for an outdoor flag to hit. That is the position in most of the country, and it is the reason every manufacturer settles on the same standard sizes.

We build a faithful reproduction of that design at the standard outdoor sizes the industry uses, the same sizes states order for themselves. Correct colors, seal and emblems are what an outdoor flag has to get right, and that is what this one gets right.

The law that defines it, in its own words

Tennessee Code Section 4-1-301, subsection (a) reads:

(a) The flag or banner of this state shall be of the following design, colors and proportions, to wit: an oblong flag or banner in length one and two-thirds (1 2/3) times its width, the principal field of same to be of color red, but the flag or banner ending at its free or outer end in a perpendicular bar of blue, of uniform width, running from side to side, that is to say, from top to bottom of the flag or banner, and separated from the red field by a narrow margin or stripe of white of uniform width; the width of the white stripe to be one-fifth (1/5) that of the blue bar; and the total width of the bar and stripe together to be equal to one-eighth (1/8) of the width of the flag. In the center of the red field shall be a smaller circular field of blue, separated from the surrounding red field by a circular margin or stripe of white of uniform width and of the same width as the straight margin or stripe first mentioned. The breadth or diameter of the circular blue field, exclusive of the white margin, shall be equal to one-half (1/2) of the width of the flag. Inside the circular blue field shall be three (3) five-pointed stars of white distributed at equal intervals around a point, the center of the blue field, and of such size and arrangement that one (1) point of each star shall approach as closely as practicable without actually touching one (1) point of each of the other two (2) around the center point of the field; and the two (2) outer points of each star shall approach as nearly as practicable without actually touching the periphery of the blue field. The arrangement of the three (3) stars shall be such that the centers of no two (2) stars shall be in a line parallel to either the side or end of the flag, but intermediate between same; and the highest star shall be the one nearest the upper confined corner of the flag.

Subsection (b) makes it an offense to knowingly manufacture or sell a state flag that does not comply with this design, and subsection (c) requires every Tennessee flag to carry markings showing the correct way to fly it. Ours does.

You do not have to take our word for any of that. Read Tennessee Code Section 4-1-301 in full at FindLaw, and check what we sell against it.

This is the actual flag we manufacture, not an approximation.

What is on it and what it means

Reeves wrote it down himself. The three stars are the three Grand Divisions, East, Middle and West, bound together by the endless circle, an indissoluble trinity. The blue bar at the fly relieves the sameness of the crimson field.

What most listings get wrong

The three stars do not mean Tennessee was the third state after the original thirteen. Reeves rejected that reading personally, and it is still the most repeated claim about this flag. The bar at the fly is functional, so a limp flag still shows all three colors, not symbolic.

Where the Tennessee flag flies

Camping World in Sevierville flies a forty by eighty foot flag on a hundred and thirty foot pole. The City of Sevierville sued in 2025 because zoning caps poles at forty four feet. Well documented but not an adjudicated state record, and it is one of several identical installations nationwide.

Fly it on Tennessee’s birthday

Tennessee became the 16th state on June 1, 1796. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Tennessee flag has an official reason to go up.

Order ahead and this flag is ready for the day. The complete list of state birthdays lives on our state birthdays page.

Nylon or polyester in Tennessee

Nylon statewide at Nashville, Memphis, Knoxville and Chattanooga. Polyester where severe storm wind is highest.

For scale, the National Weather Service ultraviolet index forecast for Memphis on July 23, 2026 was 7 at solar noon, in the high band. That is the sun this flag has to survive.

A house flag at fifteen square feet lives or dies on material choice for two reasons: flying in light wind, and drying speed after rain.

This listing is nylon, right for the sheltered and moderate wind sites above, for a standard house bracket, and for anywhere you take the flag down before a storm. Two things make it the pick. It flies on the breeze most yards actually see instead of hanging flat, being light, and it dries fast, which fights mildew where humidity is high. What it sacrifices is ultraviolet resistance: nylon’s amide bonds absorb and break under sun, losing strength and color faster than polyester, plus roughly a tenth of its strength while wet. For an exposed site from the list above, the polyester version is the better choice.

This is the detail people usually only figure out after buying twice: nylon will fly on a day too calm for polyester to move at all. If flying on a still morning, a holiday, at a funeral, or at a ceremony matters to you, that is reason enough to choose nylon even where polyester would survive longer. A motionless flag fails at its purpose regardless of how durable it is.

The benchmark institutions generally lean on comes from the American Legion: the federal government's own expectation is about ninety days for a daily sunrise-to-sunset flag, and roughly a quarter of that flying around the clock. Retailers report three to six months for nylon flown daily, four to eight months for polyester, and one to three years for occasional flying. Treat those as working estimates rather than a warranty, since exposure can shift them a great deal.

How the 3x5 Feet is built

This size fails at the fly end first, and sooner than it should on most 3x5 foot flags, because this size gets bought on price more than any other. Four rows of lock stitching at the fly end is what separates one season from three.

The math comes to 15 square feet of nylon at roughly two ounces a square yard. In a thirty mile an hour wind, the fly end moves faster than the wind that is driving it, since the wave headed for the tip speeds up as it travels — which explains why the tip wears out first and why fly-end stitching count is worth checking on any listing.

One person handles the whole job, up or down, and it folds into a drawer. A monthly two-flag rotation costs a minute of your time at this size.

Lock stitching means each stitch is knotted into the next, so a broken thread stops where it broke rather than unzipping the seam. 4 rows does not mean 4 times the strength; it means 3 backups. The heading is an inch and a half of reinforced heavy duty white material, holding two solid brass grommets. Fifteen square feet of sail area works those grommets hard on a windy site.

Commercial grade nylon is the material in this flag. Light enough to catch a gentle breeze, it sheds water rather than holding onto it and dries fast, which keeps a flag from staying heavy and stressing its seams. The ink is UV resistant and field tested, since sun exposure is what determines how long the color lasts.

A design that reproduces cleanly

A circle, three stars and a fly bar. No seal and no lettering, which is why it rates well and costs little.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Tennessee flag placed 14, at 6.98 out of 10.

Will it fit my flagpole?

Built for the most common residential pairing in the country: a five or six foot house bracket, or an in-ground flagpole between fifteen and twenty feet.

Questions about the 3x5 Feet

What size flagpole does a 3x5 foot flag need? A six foot house bracket, or an in-ground flagpole of fifteen to twenty feet. It is the most common residential pairing in the country.

How long does a 3x5 foot nylon flag last outside? The federal working figure is about ninety days for a flag flown daily from sunrise to sunset, and about a quarter of that flown around the clock. Retailers commonly see three to six months in daily use and one to three years flown on occasions only.

Is this flag printed or sewn? The design is printed in UV resistant ink on one side and reads through in reverse on the back, which is how nearly every state flag sold in the country is made. The construction, the heading, the stitching and the grommets are sewn.

Why this size gets replaced most

The 3x5 foot flag is not weaker by design — it is simply the size most often sold on price, which means most of them are built down to a price. A cheap one, with just one or two rows of fly-end stitching, frays within a season and is six inches shorter by the next one. Construction is the whole story here.

Specifications

• Size: 3x5 Feet
• Area: 15 square feet
• Material: 100 percent nylon
• Fly end: 4 rows of lock stitching
• Heading: heavy duty white, reinforced, 1-1/2 inch
• Finish: Brass Grommets
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

Both tables follow the same logic. A flagpole reads best with a flag whose length falls between a quarter and a third of its height. Where a size could go either way, smaller means more flying days and a longer life, bigger means more visibility at range.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

Push the flagpole past a hundred feet and the same ratio still applies, but it stops being a simple lookup: the flag, the truck, the halyard, the foundation and the wind load need to be engineered as a unit, and skipping that step damages the flagpole before it damages the flag. A number of famous large flags deliberately break the rule of thumb, on an engineer’s word rather than a table’s.

We do not limit ourselves to what is listed on the site. The full range above is available to order, and an unlisted size can still be supplied.

About the back of the flag

Hold a printed flag up to the light and the reverse side shows the design in mirror image. That is not a defect — it is how nearly every flag flown in America is made. A flag correct on both sides is a double sided flag, two flags sewn together around a liner, and it runs roughly double the price and double the weight. Unless a state’s own statute calls for it, single sided is standard and it is the right call.

Flying it with the United States flag

Title 4, Section 7 of the Flag Code is the source for this. The United States flag is never subordinate in position — nothing flies above it, and nothing takes its place at the viewer’s left when flags are level with each other. On matched flagpoles, the United States flag takes the viewer’s left and the flags should be sized the same; on unequal flagpoles, it goes on the taller one; and on a single pole flying two flags, it goes at the top. There is no penalty for civilians who do not follow the Code, but institutions treat it as the standard regardless.

Buy two and they both last longer

Two flags, alternated month to month, beat three flags flown until they fall apart, because the material recovers on its days off and the fly end is not worked in the same place every day. Severe weather is the one time to take it down; a real windstorm can cost more in one night than six ordinary months of flying. Fraying starts at the fly end, not the middle, and a few minutes with a needle there adds a season.

For cities, counties, schools and agencies

We supply state flags to municipalities, school districts, fire and police departments, courthouses and state agencies. Tax exempt accounts are handled through the tax exempt page. For quantities, replacement schedules or sizes not listed, use the contact page.

Why buy it from us

This is a small American company, and what you see listed is what we actually stock. Every flag is made in the United States, printed with UV resistant ink, and built to the construction described above, not to whatever a price point demands. Selling one flag that lasts beats selling three that fail. Orders over twenty five dollars ship free.