FORTISVEX Ohio State Flag 8x12 Feet Nylon - Made in USA with Rope and Thimbles

Ninety six square feet, on a forty to fifty foot flagpole outside a civic building, a campus, a large commercial site: that is the 8x12 foot flag, and it is bought on purpose, never by accident.

This is the Ohio state flag at 8x12 Feet (96 square feet) in nylon, made in the United States and finished with a sewn rope and plated steel thimbles.

Built to the Ohio flag specification

The Ohio flag is set out in Ohio Revised Code Section 5.01, at a proportion of eight to thirteen. It is a burgee, a swallowtail shape, with three red and two white stripes and a blue triangle carrying seventeen white stars around a red disc on a white letter O.

Designed by the architect John Eisenmann in 1901 for the Pan-American Exposition and adopted May 9, 1902.

Ohio Revised Code Section 5.01 contains no numbers at all on size. It says the proportional dimensions shall be according to the official design on file in the office of the Secretary of State. The eight to thirteen figure everyone quotes comes from measuring that filed design, not from the statute.

We build a faithful reproduction of that design at the standard outdoor sizes the industry uses, the same sizes states order for themselves. Correct colors, seal and emblems are what an outdoor flag has to get right, and that is what this one gets right.

The law that defines it, in its own words

Ohio Revised Code Section 5.01 reads:

The flag of the state shall be burgee-shaped. It shall have three red and two white horizontal stripes that represent the roads and waterways of the state. The union of the flag shall be seventeen five-pointed stars, white in a blue triangular field that represents the state's hills and valleys, the base of which shall be the staff end or vertical edge of the flag, and the apex of which shall be the center of the middle red stripe. The stars shall be grouped around a red disc superimposed upon a white circular "O." The thirteen stars grouped around the "O" represent the original states of the United States and the four stars added to the peak of the triangle symbolize that Ohio was the seventeenth state admitted to the union. The "O" represents the "O" in "Ohio" and suggests the state's nickname, the buckeye state. The proportional dimensions of the flag and of its various parts shall be according to the official design on file in the office of the secretary of state.

The emblem itself is defined by reference to the official design on file with the Secretary of State, so these words are the frame and not the whole picture.

You do not have to take our word for any of that. Read Ohio Revised Code Section 5.01 in full at the Ohio Revised Code, and check what we sell against it.

This is the actual flag we manufacture, not an approximation.

What is on it and what it means

The stripes are roads and waterways. The triangle is the hills and valleys. Thirteen stars around the O are the original states, with four added marking Ohio as the seventeenth. The O and the red disc suggest both Ohio and the buckeye.

What most listings get wrong

Many manufacturers print the burgee onto a rectangular field because it is cheaper. That is not the Ohio flag. The swallowtail is the design.

It is the only non-rectangular state flag in the United States.

Where the Ohio flag flies

Dave Arbogast Buick GMC in Troy on Interstate 75 flies a thirty by fifty foot flag on a hundred and fifty eight foot pole, which the dealership calls the largest flag in Ohio. A historic pole worth noting is the Ravenna Flagpole in downtown Ravenna, a hundred and fifty feet, built in 1893 by the Van Dorn Company, a rare surviving iron lattice flagpole documented by the city and the Portage County Historical Society.

Fly it on Ohio’s birthday

Ohio became the 17th state on March 1, 1803. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Ohio flag has an official reason to go up.

Ohio Statehood Day is March 1, set by Ohio Revised Code Section 5.224, and the Ohio History Connection holds an annual Statehood Day event at the Statehouse.

Buy it now and it is on the flagpole for the day. The full list of state birthdays is on our state birthdays page.

Nylon or polyester in Ohio

Nylon statewide at Columbus, the Cleveland interior and Cincinnati. Polyester on the Lake Erie shore.

Note that Ohio's swallowtail flag concentrates wind wear at the split fly end, so reinforced stitching there matters more than on any other state flag.

At ninety six square feet the flagpole feels the load in earnest, and on an exposed site above, polyester is the only sensible material, with the flagpole and truck rated accordingly.

The nylon is what you are looking at here — the right choice for the sheltered and moderate wind sites named above, for a house bracket, and for anywhere the flag comes down ahead of storms. Two things settle it. It is light enough to fly on an ordinary yard’s breeze rather than sag, and it dries fast, fighting mildew in humid conditions. What it gives up is resistance to ultraviolet — nylon’s amide bonds break under sun, costing strength and color faster than polyester, and it loses roughly a tenth of its strength while wet. If the site is one of the exposed ones above, the polyester version fits better.

One more consideration, learned by most people only after a repeat purchase: a nylon flag moves in conditions where polyester hangs still. If the flag needs to actually be flying — a calm morning, a holiday, a funeral, a ceremony — that is an argument for nylon even on a site where polyester would technically outlast it. A flag that just hangs there has failed just as much as one that frays.

Most institutions work from the same benchmark, reported by the American Legion: the United States government's expectation is roughly ninety days for a flag flown daily sunrise to sunset, and about a quarter of that for one flown around the clock. In practice, retailers report three to six months for nylon flown daily, four to eight for polyester, and one to three years for a flag flown only on occasions. These are working numbers, not a guarantee, and exposure can move them substantially either way.

How the 8x12 Feet is built

This size gets six rows of lock stitching on the fly end and zig zag stitched corners, since a straight-sewn corner is exactly what a season of wind will work open.

Work the numbers and you get 96 square feet of nylon at roughly two ounces a square yard. At thirty miles an hour, the fly end actually outpaces the wind, because the wave running to the tip accelerates along the way — the reason the tip fails first, and the reason fly-end stitching count is the number that matters.

Whether folding on the ground or clipping onto the flagpole, this is two person work. Ninety six square feet in a gust can knock a lone worker off balance.

Lock stitching means each stitch is knotted into the next, so a broken thread stops where it broke rather than unzipping the seam. 6 rows does not mean 6 times the strength; it means 5 backups. The grommets are gone at this size. A nylon rope is sewn the full length of the heading with two plated steel thimbles, so the load runs through the rope rather than tearing at two fixed points.

The material here is commercial grade nylon. Its lightness lets it fly on a gentle breeze, it sheds rather than absorbs water, and it dries quickly, sparing the seams the extra weight and strain of staying wet. Field tested UV resistant ink handles the part that actually determines fade life: sun exposure.

Why this flag is harder to make than most

The swallowtail has to be cut and the two tails hemmed and stitched, which no rectangular flag requires. It is the most expensive shape in the trade and the reason a real Ohio flag costs more than its neighbors.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Ohio flag placed 15, at 6.87 out of 10.

Will it fit my flagpole?

A forty to fifty foot in-ground flagpole with proper truck and halyard hardware suits this size, not a house bracket.

Questions about the 8x12 Feet

What size flagpole for an 8x12 foot flag? Forty to fifty feet, on a truck and halyard rated for the load. This is an institutional flag.

What are the thimbles for? The rope sewn through the heading ends in two plated steel thimbles. The halyard snaps clip to the thimbles, so the pull runs through the rope along the whole hoist rather than tearing at two grommets.

Can an 8x12 foot flag fly around the clock? It can, on a lit flagpole, but a flag flown twenty four hours lasts roughly a quarter as long as one flown sunrise to sunset. Budget for that.

Why the grommets disappear

Concentrating ninety six square feet of pull onto two brass rings does not hold, which is why a rope runs the full length of the heading, spreading the load across the whole hoist and letting thimbles carry the attachment point. It costs more to build, but it is the only construction that survives at this size.

Specifications

• Size: 8x12 Feet
• Area: 96 square feet
• Material: 100 percent nylon
• Fly end: 6 rows of lock stitching
• Heading: heavy duty white, reinforced, 2 inch
• Finish: Rope and Thimbles
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

Underneath both tables is a single ratio: a flag a quarter to a third the flagpole’s height. When you land between two rows, that is a real choice, not a rounding error — smaller flies more often, bigger reads further.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

Nothing about the ratio breaks above a hundred feet, but the purchase does: the flag, the flagpole, the truck, the halyard and the foundation become one system that has to be specified together, and skipping that check risks the flagpole before it risks the flag. Some of the largest flags flown in the country are deliberately oversized for their rule-of-thumb flagpole, always on an engineer’s sign-off.

We supply the whole range shown above, whether or not a given size currently has its own listing on the site. Ask if you do not see it.

About the back of the flag

It is normal for a printed flag to read backward from behind — almost every flag flown in America works this way. A flag that reads correctly from both sides is double sided: two flags sewn together with a liner, at roughly double the weight and cost. Single sided stays the standard and the right choice except where a state’s own law requires the double sided build.

Flying it with the United States flag

The rule comes from Title 4, Section 7 of the United States Flag Code: no flag is displayed above the United States flag, and none is placed to its right at the same level, which from the viewer’s position means the left. Equal-height flagpoles carry the United States flag on the viewer’s left with matching flag sizes; unequal flagpoles put it on the taller one; a single flagpole with two flags carries it at the top. Civilians face no penalty for departing from the Flag Code, but it is the standard institutions hold to.

Buy two and they both last longer

Fly one for a month, then swap. Two flags rotated monthly will outlast three flags flown to destruction, because the fabric recovers when it rests and the fly end stops taking the same abuse in the same place. Take it down in severe weather; a flag left up through a real windstorm can take more damage in one night than in six normal months. And watch the fly end rather than the middle, because a few minutes with a needle when the fraying starts buys another season.

For cities, counties, schools and agencies

We supply state flags to municipalities, school districts, fire and police departments, courthouses and state agencies. Tax exempt accounts are handled through the tax exempt page. For quantities, replacement schedules or sizes not listed, use the contact page.

Why buy it from us

Small and American describes this company, and we stock what we list. Every flag is made in the United States, printed with UV resistant ink, and finished to the construction described above rather than to a price target. We’d rather sell one flag that holds up than three that don’t. Free shipping on orders over twenty five dollars.