FORTISVEX
FORTISVEX North Dakota State Flag 6x10 Feet Nylon - Made in USA with Brass Grommets
- MPN:
- FPAMSTNDNYL6x10G
- Availability:
- Free Shipping* https://fortisvex.com/shipping-returns-terms/
- Shipping:
- Calculated at Checkout
Description
This is the size where a state flag leaves residential territory behind. Sixty square feet is commercial, flown on a commercial flagpole, and it is the last size built with grommets before rope takes over.
This is the North Dakota state flag at 6x10 Feet (60 square feet) in nylon, made in the United States and finished with brass grommets.
Built to the North Dakota flag specification
The North Dakota flag is set out in North Dakota Century Code Section 54-02-02, which fixes exact dimensions and yellow fringe. It is a blue field with a bald eagle carrying an olive branch and arrows, a shield on its breast, a sunburst, a fan of thirteen stars and a red scroll reading North Dakota.
Adopted in 1911, nearly identical to the regimental flag of the First North Dakota Infantry of 1898.
The design, the colors and the seal or emblem are set by statute; the size of a modern outdoor flag is not. That is the case in most of the country, and it is why manufacturers across the industry all build to the same standard sizes.
We build a faithful reproduction of that design at the standard outdoor sizes the industry uses, the same sizes states order for themselves. Correct colors, seal and emblems are what an outdoor flag has to get right, and that is what this one gets right.
The law that defines it, in its own words
North Dakota Century Code Section 54-02-02 reads:
The flag of North Dakota must consist of a field of blue silk or material which will withstand the elements four feet four inches on the pike and five feet six inches on the fly, with a border of knotted yellow fringe two and one-half inches wide. On each side of said flag in the center thereof, must be embroidered or stamped an eagle with outspread wings and with opened beak. The eagle must be three feet four inches from tip to tip of wing, and one foot ten inches from top of head to bottom of olive branch hereinafter described. The left foot of the eagle shall grasp a sheaf of arrows, the right foot shall grasp an olive branch showing three red berries. On the breast of the eagle must be displayed a shield, the lower part showing seven red and six white stripes placed alternately. Through the open beak of the eagle must pass a scroll bearing the words "E Pluribus Unum". Beneath the eagle there must be a scroll on which must be borne the words "North Dakota". Over the scroll carried through the eagle's beak must be shown thirteen five-pointed stars, the whole device being surmounted by a sunburst. The flag must conform in all respects as to color, form, size, and device with the regimental flag carried by the First North Dakota Infantry in the Spanish American War and Philippine Insurrection, except in the words shown on the scroll below the eagle.
The statute prints each measurement with its metric equivalent in brackets, omitted here for readability. A 2011 amendment added color chart and historical accuracy requirements for reproductions.
You do not have to take our word for any of that. Read North Dakota Century Code Section 54-02-02 in full at the North Dakota Legislative Branch, and check what we sell against it.
This is what we actually make, not a stand-in for it.
What is on it and what it means
The eagle carries an olive branch and arrows with a shield on its breast, above a sunburst and a fan of thirteen stars. The scroll names the state.
What most listings get wrong
The flag is not the North Dakota coat of arms, which was adopted separately in 1957 and looks nothing like it. The two get confused regularly.
Where the North Dakota flag flies
No citizen state capitol program was confirmed. since January 3, 2019 the flags of North Dakota's five tribal nations, the Mandan Hidatsa and Arikara Nation, the Sisseton Wahpeton Oyate, the Spirit Lake Nation, the Standing Rock Sioux and the Turtle Mountain Band of Chippewa, are displayed in the Capitol's Memorial Hall outside the Governor's office, later made a permanent display by the legislature. The state flag is a near exact copy of the regimental flag carried by the First North Dakota Infantry in the Spanish American War and Philippine campaign of 1898 and 1899. The State Historical Society is the statutory custodian of the official design standards. The Capitol is a nineteen story Art Deco tower.
Fly it on North Dakota’s birthday
North Dakota became the 39th state on November 2, 1889. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the North Dakota flag has an official reason to go up.
Order ahead and this flag is ready for the day. The complete list of state birthdays lives on our state birthdays page.
Nylon or polyester in North Dakota
Polyester statewide at Fargo and Bismarck. Open plains wind, blizzards and freeze cycling.
For scale, the National Weather Service ultraviolet index forecast for Bismarck on July 23, 2026 was 8 at solar noon, in the very high band. That is the sun this flag has to survive.
At sixty square feet this is a commercial flag, and on the exposed sites above the choice of flag material is the difference between one season and three.
This listing is the nylon. It is the right choice for the sheltered and moderate wind sites named above, on any house bracket, and anywhere the flag comes down in storms. Two things decide that. Nylon is light, so it flies on the breeze most yards actually get instead of hanging limp, and it dries fast, which is what fights mildew in a humid climate. What it gives up is ultraviolet life: nylon’s amide bonds absorb ultraviolet and break, so under hard sun it loses strength and color faster than polyester, and it loses roughly a tenth of its strength while it is wet. If your site is one of the exposed ones above, look at the polyester version of this flag instead.
One more consideration, learned by most people only after a repeat purchase: a nylon flag moves in conditions where polyester hangs still. If the flag needs to actually be flying — a calm morning, a holiday, a funeral, a ceremony — that is an argument for nylon even on a site where polyester would technically outlast it. A flag that just hangs there has failed just as much as one that frays.
The figure most institutions use is from the American Legion, citing the United States government's expectation of about ninety days for a flag flown daily from sunrise to sunset, and roughly a quarter of that around the clock. Retailers see three to six months in practice for nylon flown daily, four to eight for polyester, and one to three years when flown occasionally. These are practical figures, not a guarantee, and real-world exposure shifts them considerably.
How the 6x10 Feet is built
This is the size where the stitching goes to six rows on the fly end rather than four. Sixty square feet generates far more force at the tip than a house flag ever will, and four rows is no longer enough.
Here is the arithmetic: 60 square feet of nylon at roughly two ounces a square yard. A thirty mile an hour wind sends the fly end moving faster than the wind itself, since the wave traveling toward the tip picks up speed as it goes — which is why the tip wears out first, and why the fly end's stitching count is the figure to check on any listing.
Two people to fold properly, and a clear patch of ground or a clean surface. Sixty square feet does not fold on a tailgate.
With lock stitching, every stitch knots into its neighbor, so damage stays contained at the break instead of running down the seam. Read 6 rows not as 6 times the strength but as 5 backups. Two inches of reinforced heavy duty white heading carries brass grommets and tooth washers here — the part of the flag under the most sustained strain at this size.
The material here is commercial grade nylon. Its lightness lets it fly on a gentle breeze, it sheds rather than absorbs water, and it dries quickly, sparing the seams the extra weight and strain of staying wet. Field tested UV resistant ink handles the part that actually determines fade life: sun exposure.
Why this flag is harder to make than most
A detailed eagle with a shield, a sunburst and thirteen stars. Feather detail at flag scale is expensive and it is where the cost sits.
For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The North Dakota flag placed 56, at 3.69 out of 10.
Will it fit my flagpole?
Thirty to forty feet of in-ground flagpole is the right pairing for this size.
Questions about the 6x10 Feet
What size flagpole for a 6x10 foot flag? Thirty to forty feet. At this size the flag is commercial and the flagpole has to be an in-ground pole with a truck and halyard.
Why does the 6x10 foot flag have grommets when the 8x12 foot flag has a rope? Sixty square feet is the most two brass grommets can be asked to carry. Above this the load is spread along a rope sewn the length of the heading.
Does a 6x10 foot flag need a heavier flagpole? A sixty square foot flag in a gust loads a flagpole hard. If the pole was sold for a 4x6 foot or 5x8 foot flag, check its rating before stepping up.
The last size on grommets
Everything above this is finished with a rope sewn the full length of the heading rather than two grommets, because two points can no longer carry the load. The 6x10 foot flag sits right at that boundary, which is why it runs six rows of stitching and a two inch heading while still using grommets.
Specifications
- Size: 6x10 Feet
- Area: 60 square feet
- Material: 100 percent nylon
- Fly end: 6 rows of lock stitching
- Heading: heavy duty white, reinforced, 2 inch
- Finish: Brass Grommets
- Ink: UV resistant, field tested
- Made in the United States by FORTISVEX
Which size do I need?
Underneath both tables is a single ratio: a flag a quarter to a third the flagpole’s height. When you land between two rows, that is a real choice, not a rounding error — smaller flies more often, bigger reads further.
If you know your flagpole height, start here.
- 6 Feet house bracket: 2x3 Feet or 3x5 Feet
- 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
- 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
- 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
- 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
- 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
- 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
- 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
- 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
- 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
- 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
- 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
- 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole
If you know your flag size, start here.
- 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
- 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
- 4x6 Feet: 18 to 25 Feet in-ground flagpole
- 5x8 Feet: 25 to 35 Feet flagpole
- 6x10 Feet: 30 to 40 Feet flagpole
- 8x12 Feet: 40 to 50 Feet flagpole
- 10x15 Feet: 50 to 60 Feet flagpole
- 12x18 Feet: 60 to 80 Feet flagpole
- 15x25 Feet: 80 to 100 Feet flagpole
- 20x30 Feet: 100 to 120 Feet flagpole
- 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
- 30x50 Feet: 150 to 200 Feet flagpole
- 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
- 50x80 Feet: 240 Feet and above, engineered to the flagpole
That same ratio keeps working past a hundred feet, but at that point the flag and the flagpole are no longer separate purchases — the truck, the halyard, the foundation and the wind load all have to be sized together, and a flag chosen without checking the flagpole first damages the pole rather than itself. A handful of well known installations deliberately run past the rule of thumb, and every one of them did it with an engineer, not a chart.
Every size in both tables can be ordered, listed here or not. If the size you want does not appear on the website, contact us and we can still supply it.
About the back of the flag
A printed flag's reverse face is a mirror image of the front, and that is standard, not a fault — it describes most of the flags flown across the country. Double sided construction, which reads correctly from either face, sews two flags together with a liner and roughly doubles both weight and price. Single sided remains standard, and correct, unless a state's statute specifically calls for double sided.
Flying it with the United States flag
Governing this is Title 4, Section 7 of the United States Flag Code, which keeps the United States flag in the position of honor: never below another flag, never to the right of one at the same level, meaning never right of the viewer’s left. Two flagpoles at equal height put the United States flag at the viewer’s left with equal-sized flags; unequal heights put it on the taller pole; a single flagpole with two flags carries it at the top. No penalty attaches for private citizens under the Code, but it is what institutions follow as standard practice.
Buy two and they both last longer
Rotate two flags on a monthly cycle and they will outlast three flags flown until they fail, because the fabric gets a rest and the fly end is not taking the same beating in the same spot every day. Bring it down before severe weather; one real windstorm can do more damage overnight than six ordinary months. Check the fly end, not the middle — a few minutes of stitching at the first sign of fraying buys another season.
For cities, counties, schools and agencies
Municipalities, school districts, fire and police departments, courthouses and state agencies all buy state flags from us regularly. The tax exempt page handles tax exempt accounts, and the contact page is the route for quantity orders, replacement schedules or a size not shown here.
Why buy it from us
Small and American describes this company, and we stock what we list. Every flag is made in the United States, printed with UV resistant ink, and finished to the construction described above rather than to a price target. We’d rather sell one flag that holds up than three that don’t. Free shipping on orders over twenty five dollars.
Additional Information
Material Type: |
Commercial Nylon |
Flag Size: |
6x10 Feet |
Made in: |
USA |
Finish: |
Brass Grommets |