FORTISVEX Michigan State Flag 6x10 Feet Nylon - Made in USA with Brass Grommets

Residential ends here. A 6x10 foot flag is sixty square feet of commercial flag for a commercial flagpole — and the last size still finished with grommets rather than a sewn rope.

This is the Michigan state flag at 6x10 Feet (60 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the Michigan flag specification

The Michigan flag is set out in Michigan Compiled Laws Section 2.23, with the arms at Section 2.22 from Act 209 of 1911. It is the state coat of arms on dark blue.

Adopted August 1, 1911, making it Michigan’s third flag.

What the statute here fixes is the design, the colors and the seal or emblem; it does not fix a size for an outdoor flag to hit. That is the position in most of the country, and it is the reason every manufacturer settles on the same standard sizes.

We hold to a faithful reproduction of that design, at the standard outdoor sizes the industry uses and the states themselves buy. What matters on a flag that flies outdoors is accurate colors, seal and emblems, and that is exactly what this one has.

The law that defines it, in its own words

Michigan Compiled Laws Section 2.23, Act 209 of 1911 reads:

The state flag shall be blue charged with the arms of the state.

The arms are defined in words at Section 2.22, by reference.

You do not have to take our word for any of that. Read Michigan Compiled Laws Section 2.23 in full at Justia, and check what we sell against it.

This is the flag we make. Not an approximation of it.

What is on it and what it means

The arms carry elk and moose supporters, a bald eagle crest, the motto Tuebor meaning I Will Defend, the words E Pluribus Unum, and the state motto Si Quaeris Peninsulam Amoenam Circumspice, If You Seek a Pleasant Peninsula, Look About You.

Worth knowing about this flag

Three separate Latin mottoes appear on this flag. Most listings mention one.

Where the Michigan flag flies

Each holds a significant Civil War battle flag collection. Connecticut's is at the Museum of Connecticut History in Hartford. Illinois has the State Military Museum in Springfield. Massachusetts has the State House Hall of Flags. Michigan runs a Save the Flags program with rotating display at the Capitol. Minnesota's Historical Society holds the First Minnesota's colors associated with Gettysburg.

Walter and Mary Burke Park in New Baltimore, a hundred and sixty feet, completed October 2016, flying a thirty by sixty foot flag. Funded by the New Baltimore Lions Club at about a hundred and seven thousand dollars with no tax money.. A competing dealership claim at George Matick Chevrolet in Redford Township, a hundred and fifty four feet in June 2023, is shorter.

Fly it on Michigan’s birthday

Michigan became the 26th state on January 26, 1837. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Michigan flag has an official reason to go up.

Have it on hand before the date arrives and it is on the flagpole in time. The full state-by-state list is on our state birthdays page.

Nylon or polyester in Michigan

Nylon inland. Polyester on the Great Lakes shorelines for lake effect wind and moisture.

At sixty square feet, firmly commercial territory, the material choice on an exposed site above decides between one season and three.

The nylon is what you are looking at here — the right choice for the sheltered and moderate wind sites named above, for a house bracket, and for anywhere the flag comes down ahead of storms. Two things settle it. It is light enough to fly on an ordinary yard’s breeze rather than sag, and it dries fast, fighting mildew in humid conditions. What it gives up is resistance to ultraviolet — nylon’s amide bonds break under sun, costing strength and color faster than polyester, and it loses roughly a tenth of its strength while wet. If the site is one of the exposed ones above, the polyester version fits better.

There is one more factor, and most people only discover it after buying the wrong material once: a nylon flag moves on days a polyester flag stays limp. If it matters to you that the flag is actually flying on a still morning, a holiday, at a funeral, at a ceremony, that favors nylon even where polyester would outlast it. A flag hanging motionless has failed at its job too.

The benchmark institutions generally lean on comes from the American Legion: the federal government's own expectation is about ninety days for a daily sunrise-to-sunset flag, and roughly a quarter of that flying around the clock. Retailers report three to six months for nylon flown daily, four to eight months for polyester, and one to three years for occasional flying. Treat those as working estimates rather than a warranty, since exposure can shift them a great deal.

How the 6x10 Feet is built

This is the size where the stitching goes to six rows on the fly end rather than four. Sixty square feet generates far more force at the tip than a house flag ever will, and four rows is no longer enough.

Here is the arithmetic: 60 square feet of nylon at roughly two ounces a square yard. A thirty mile an hour wind sends the fly end moving faster than the wind itself, since the wave traveling toward the tip picks up speed as it goes — which is why the tip wears out first, and why the fly end's stitching count is the figure to check on any listing.

Folding this properly takes two people and clear ground or a clean surface — sixty square feet will not fold neatly on a tailgate.

Each lock stitch knots into the one beside it, so a broken thread stays broken right where it snapped instead of unraveling the whole seam. 6 rows is not 6 times the strength — it is 5 backups. At sixty square feet, the heading takes the most sustained strain of any part of the flag, which is why it runs two inches of reinforced heavy duty white with brass grommets and tooth washers.

This flag is commercial grade nylon, light enough to move in a gentle breeze, and it sheds water instead of soaking it up, drying fast — which matters, since a wet flag is a heavy flag that works its own seams harder. UV resistant, field tested ink is what stands between the flag and the sun, since sun is what fades a flag over time.

Why this flag is harder to make than most

Two large animal supporters, an eagle, a shield and three mottoes. In terms of sheer element count it is one of the busiest flags in the country.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Michigan flag placed 59, at 3.46 out of 10.

Will it fit my flagpole?

An in-ground flagpole thirty to forty feet tall suits this flag.

Questions about the 6x10 Feet

What size flagpole for a 6x10 foot flag? Thirty to forty feet. At this size the flag is commercial and the flagpole has to be an in-ground pole with a truck and halyard.

Why does the 6x10 foot flag have grommets when the 8x12 foot flag has a rope? Sixty square feet is the most two brass grommets can be asked to carry. Above this the load is spread along a rope sewn the length of the heading.

Does a 6x10 foot flag need a heavier flagpole? A sixty square foot flag in a gust loads a flagpole hard. If the pole was sold for a 4x6 foot or 5x8 foot flag, check its rating before stepping up.

The last size on grommets

Past this size, construction shifts entirely to a sewn rope the length of the heading, since two grommets cannot carry the load any further. The 6x10 Feet sits exactly at that boundary — six rows of stitching, a two inch heading, and still grommets.

Specifications

• Size: 6x10 Feet
• Area: 60 square feet
• Material: 100 percent nylon
• Fly end: 6 rows of lock stitching
• Heading: heavy duty white, reinforced, 2 inch
• Finish: Brass Grommets
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

Both tables come down to one ratio: the flag’s length wants to be a quarter to a third of the flagpole’s height. When a size sits on the border between two rows, the smaller flag will fly on more days and outlast the bigger one, while the bigger flag is the one people notice from further off.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

Nothing about the ratio breaks above a hundred feet, but the purchase does: the flag, the flagpole, the truck, the halyard and the foundation become one system that has to be specified together, and skipping that check risks the flagpole before it risks the flag. Some of the largest flags flown in the country are deliberately oversized for their rule-of-thumb flagpole, always on an engineer’s sign-off.

The full range is available to order even where a size is not shown on the site. If what you need is not listed here, ask and we can still get it made.

About the back of the flag

A single sided printed flag shows its design correctly on one face and reversed on the other. That is expected, and it describes almost every flag flying in the United States. A flag readable on both sides is built as two layers sewn around a liner, roughly double the cost and double the weight of a single sided flag. Unless a state’s law requires double sided, single sided remains the standard choice.

Flying it with the United States flag

The United States Flag Code, at Title 4, Section 7, sets this out: the United States flag holds the position of honor, never below another flag and never displaced from the viewer’s left when flags fly level. With two flagpoles of matching height, the United States flag takes the viewer’s left and the flags match in size; with unequal heights, it goes on the taller pole; on a single pole carrying two flags, it is at the top. The Code has no penalty attached for civilians, but it remains the standard every institution follows.

Buy two and they both last longer

The simplest way to make a flag last is to own two and rotate them monthly — that alone outlasts three flags flown to failure, because rest lets the fabric recover and the fly end is not hammered day after day. Take it down ahead of real storms, since one bad night of wind can undo six good months. Watch the fly end, where fraying starts, and a quick repair there is worth a whole extra season.

For cities, counties, schools and agencies

Cities, school districts, fire and police departments, courthouses and state agencies buy state flags from us as a matter of routine. The tax exempt page is where a tax exempt account is set up; the contact page is where quantity orders, replacement schedules, and sizes not shown here get handled.

Why buy it from us

We are a small American company and we stock what we sell. Every flag here is made in the United States, printed in UV resistant ink, and finished to the construction described above rather than to a price point. We would rather sell you one flag that lasts than three that do not. Free shipping on orders over twenty five dollars.