FORTISVEX Massachusetts State Flag 4x6 Feet Nylon - Made in USA with Brass Grommets

This is the first size that genuinely outgrows a house bracket and calls for a flagpole in the ground. The honest reason to buy a 4x6 foot flag is size, not looks.

This is the Massachusetts state flag at 4x6 Feet (24 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the Massachusetts flag specification

The Massachusetts flag is set out in the current seal and flag provisions, with a redesign commission established by Chapter 140 of the Acts of 2024. It is the state seal and coat of arms, showing a Native American figure beneath an arm holding a sword, on a white field.

The arms and the flag remain as originally adopted; a redesign commission announced finalists in 2025 and then missed its deadline.

Massachusetts is the clearest case in the country. Its regulation at 950 CMR 34 treats four feet four inches by five feet six inches as the manufacturing pattern, then expressly authorizes commercial two by three and four by six sizes, applies a two percent tolerance, and states that silence in the specification means only the best commercial practice is to prevail.

The design here is reproduced faithfully, at the standard outdoor sizes the whole industry works in and that states buy for themselves. What actually matters on a flag flown outdoors is that the colors, the seal and the emblems are correct, and they are.

The law that defines it, in its own words

Massachusetts General Laws, Chapter 2, Section 3 reads:

The flag of the commonwealth shall consist of a white rectangular field, bearing on either side a representation of the arms of the commonwealth, except that the star shall be white. The naval and maritime flag of the commonwealth shall consist of a white rectangular field bearing on either side a representation of a green pine tree.

The arms are defined in Chapter 2, Section 1, and the manufacturing specifications are in 950 CMR 34.00.

You do not have to take our word for any of that. Read Massachusetts General Laws in full at the Massachusetts Legislature, and check what we sell against it.

It is the real flag we produce, not a simplified version.

What is on it and what it means

The seal shows a Native American figure beneath an arm holding a sword.

What most listings get wrong

A redesign commission announced finalists in 2025 and then missed its December 2025 deadline. As of now no new flag has been adopted and the original remains official. Anyone selling you a new Massachusetts flag is selling you something that is not the state flag.

Where the Massachusetts flag flies

The signature tradition is the Hall of Flags, the marble hall inside Charles Bulfinch's State House built specifically to display the Commonwealth's military color collection of more than four hundred flags, from the Civil War forward. The tradition began December 22, 1865 with the Return of the Colors, when Civil War regimental flags were returned, starting Forefather's Day. Flags have been returned after every subsequent war. To protect them, textile conservators moved the original flags into climate controlled storage in 1987, so what visitors see today are transparencies rather than the originals. Doric Hall, opened in 1798, is where flags were historically issued to troops, and its center doors open only for a head of state, the return of military colors, or a departing governor's long walk.

Each holds a significant Civil War battle flag collection. Connecticut's is at the Museum of Connecticut History in Hartford. Illinois has the State Military Museum in Springfield. Massachusetts has the State House Hall of Flags. Michigan runs a Save the Flags program with rotating display at the Capitol. Minnesota's Historical Society holds the First Minnesota's colors associated with Gettysburg.

Fly it on Massachusetts’s birthday

Massachusetts became the 6th state on February 6, 1788. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Massachusetts flag has an official reason to go up.

Order it ahead of the date and it is ready to fly that day. Every state’s birthday is listed on our state birthdays page.

Nylon or polyester in Massachusetts

Polyester on the coast and in Boston, the windiest major American city at about 12.3 to 12.5 miles per hour, plus Cape Cod salt. Nylon acceptable in the sheltered interior at Worcester and Springfield.

For scale, the National Weather Service ultraviolet index forecast for Boston on July 23, 2026 was 8 at solar noon, in the very high band. That is the sun this flag has to survive.

At this size, twenty four square feet, wind load starts to count, and the material verdict above applies with more force than at house flag size.

This is the nylon listing, suited to the sheltered and moderate wind sites named above, to any house bracket, and to anywhere you bring the flag in during storms. Two factors drive that choice. Nylon is light, catching the breeze most yards actually get instead of hanging still, and it dries quickly, which is what keeps mildew at bay in humid air. The cost is ultraviolet life: nylon’s amide bonds absorb and break under ultraviolet exposure, fading faster than polyester, and it loses about a tenth of its strength wet. On one of the exposed sites named above, look instead at the polyester version.

This is the detail people usually only figure out after buying twice: nylon will fly on a day too calm for polyester to move at all. If flying on a still morning, a holiday, at a funeral, or at a ceremony matters to you, that is reason enough to choose nylon even where polyester would survive longer. A motionless flag fails at its purpose regardless of how durable it is.

The benchmark institutions generally lean on comes from the American Legion: the federal government's own expectation is about ninety days for a daily sunrise-to-sunset flag, and roughly a quarter of that flying around the clock. Retailers report three to six months for nylon flown daily, four to eight months for polyester, and one to three years for occasional flying. Treat those as working estimates rather than a warranty, since exposure can shift them a great deal.

How the 4x6 Feet is built

A 4x6 foot flag's larger area, over half again a 3x5 Feet's, catches more wind and stresses the fly end harder. That is why it carries four rows of lock stitching rather than fewer.

Work the numbers and you get 24 square feet of nylon at roughly two ounces a square yard. At thirty miles an hour, the fly end actually outpaces the wind, because the wave running to the tip accelerates along the way — the reason the tip fails first, and the reason fly-end stitching count is the number that matters.

A one person job, technically, but the first windy day taking it down alone will make the size difference clear. Bring it in ahead of weather, not during it.

Lock stitching means each stitch is knotted into the next, so a broken thread stops where it broke rather than unzipping the seam. 4 rows does not mean 4 times the strength; it means 3 backups. The heading is reinforced heavy duty white, an inch and a half, with brass grommets and tooth washers taking a real load across twenty four square feet.

This is commercial grade nylon: light enough to fly in a light wind, quick to shed water instead of holding it, and fast to dry, which matters because a waterlogged flag is a heavier flag putting more strain on its seams. UV resistant, field tested ink is what fights the sun, which is the real driver of color loss over time.

Why this flag is harder to make than most

A detailed figure and arms on white. White fields soil faster than any other ground, and the figure’s detail is where cheap versions fail.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Massachusetts flag placed 38, at 4.78 out of 10.

Will it fit my flagpole?

This size wants an in-ground flagpole of eighteen to twenty five feet — on a six foot bracket, expect it to drag and wrap around the pole.

Questions about the 4x6 Feet

What flagpole does a 4x6 foot flag need? An in-ground flagpole of eighteen to twenty five feet. It is too large for a standard house bracket, which is the honest reason to choose it.

Is a 4x6 foot flag worth it over a 3x5 foot flag? Only if the flagpole is tall enough. On a twenty foot flagpole a 3x5 foot flag looks lost and a 4x6 foot flag fills it. On a six foot bracket the 4x6 foot flag will wrap.

Can I fly a 4x6 foot state flag with a 4x6 foot United States flag? Yes, and on two flagpoles of equal height that is the correct pairing, with the United States flag to the viewer’s left.

Where the step up starts to cost you

Going from a 3x5 foot flag to a 4x6 foot flag is where buying cheap begins to be expensive. The extra area means more force at the fly end and more load on the grommets, so a 4x6 Feet built to a budget fails faster than a 3x5 Feet built the same way. This is the size where construction stops being a nicety.

Specifications

• Size: 4x6 Feet
• Area: 24 square feet
• Material: 100 percent nylon
• Fly end: 4 rows of lock stitching
• Heading: heavy duty white, reinforced, 1-1/2 inch
• Finish: Brass Grommets
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

The rule behind both tables below is that a flag’s length should run about a quarter to a third of the flagpole’s height. Where two sizes both fit, the smaller one flies more often and lasts longer, and the larger one reads from further away.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

The quarter to a third rule holds all the way up, but above about a hundred feet the flag and the flagpole stop being two purchases and become one engineered system: the truck, the halyard, the foundation and the wind load all have to be specified together, and a flag bought without checking the flagpole rating damages the flagpole first. Several famous installations deliberately fly longer than the rule, which is a choice made with an engineer rather than from a chart.

We carry the full range whether or not every size appears on this website. If the size you need is not listed, we can still supply it.

About the back of the flag

A printed flag reads correctly from the front and reversed from the back. That is normal and it is true of almost every flag flown in the country. A flag that reads correctly from both sides is a double sided flag, built as two flags sewn together with a liner between them, and it costs roughly twice as much and weighs roughly twice as much. Unless the statute for a particular state requires it, single sided is the standard and the right choice.

Flying it with the United States flag

Title 4, Section 7 of the Flag Code is the source for this. The United States flag is never subordinate in position — nothing flies above it, and nothing takes its place at the viewer’s left when flags are level with each other. On matched flagpoles, the United States flag takes the viewer’s left and the flags should be sized the same; on unequal flagpoles, it goes on the taller one; and on a single pole flying two flags, it goes at the top. There is no penalty for civilians who do not follow the Code, but institutions treat it as the standard regardless.

Buy two and they both last longer

Keep two flags and swap them monthly. That single habit will outlast three flags run to destruction, since resting fabric recovers and the fly end is spared the repeated wear of constant flying. Take the flag down ahead of severe weather, since one bad storm night can outdo six calm months. Watch the fly end rather than the center; a little stitching early saves a whole season.

For cities, counties, schools and agencies

State flags go out to municipalities, school districts, fire and police departments, courthouses and state agencies as a matter of course. Tax exempt purchasing runs through the tax exempt page, and anything involving quantity, a replacement schedule or a size we do not list goes through the contact page.

Why buy it from us

A small American company runs this store, and everything listed here is something we actually stock. Every flag is made in the United States, printed in UV resistant ink, and built to the construction described above rather than built down to a price. We would rather one flag last than sell three that fail early. Free shipping kicks in over twenty five dollars.