FORTISVEX Massachusetts State Flag 3x5 Feet Nylon - Made in USA with Brass Grommets

When most people picture a flag, this is the size they mean. It fits the bracket that already came with the house, and it is the single most replaced size in the country.

This is the Massachusetts state flag at 3x5 Feet (15 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the Massachusetts flag specification

The Massachusetts flag is set out in the current seal and flag provisions, with a redesign commission established by Chapter 140 of the Acts of 2024. It is the state seal and coat of arms, showing a Native American figure beneath an arm holding a sword, on a white field.

The arms and the flag remain as originally adopted; a redesign commission announced finalists in 2025 and then missed its deadline.

Massachusetts is the clearest case in the country. Its regulation at 950 CMR 34 treats four feet four inches by five feet six inches as the manufacturing pattern, then expressly authorizes commercial two by three and four by six sizes, applies a two percent tolerance, and states that silence in the specification means only the best commercial practice is to prevail.

The design here is reproduced faithfully, at the standard outdoor sizes the whole industry works in and that states buy for themselves. What actually matters on a flag flown outdoors is that the colors, the seal and the emblems are correct, and they are.

The law that defines it, in its own words

Massachusetts General Laws, Chapter 2, Section 3 reads:

The flag of the commonwealth shall consist of a white rectangular field, bearing on either side a representation of the arms of the commonwealth, except that the star shall be white. The naval and maritime flag of the commonwealth shall consist of a white rectangular field bearing on either side a representation of a green pine tree.

The arms are defined in Chapter 2, Section 1, and the manufacturing specifications are in 950 CMR 34.00.

You do not have to take our word for any of that. Read Massachusetts General Laws in full at the Massachusetts Legislature, and check what we sell against it.

That is the flag as we build it. Nothing about it is approximate.

What is on it and what it means

The seal shows a Native American figure beneath an arm holding a sword.

What most listings get wrong

A redesign commission announced finalists in 2025 and then missed its December 2025 deadline. As of now no new flag has been adopted and the original remains official. Anyone selling you a new Massachusetts flag is selling you something that is not the state flag.

Where the Massachusetts flag flies

The signature tradition is the Hall of Flags, the marble hall inside Charles Bulfinch's State House built specifically to display the Commonwealth's military color collection of more than four hundred flags, from the Civil War forward. The tradition began December 22, 1865 with the Return of the Colors, when Civil War regimental flags were returned, starting Forefather's Day. Flags have been returned after every subsequent war. To protect them, textile conservators moved the original flags into climate controlled storage in 1987, so what visitors see today are transparencies rather than the originals. Doric Hall, opened in 1798, is where flags were historically issued to troops, and its center doors open only for a head of state, the return of military colors, or a departing governor's long walk.

Each holds a significant Civil War battle flag collection. Connecticut's is at the Museum of Connecticut History in Hartford. Illinois has the State Military Museum in Springfield. Massachusetts has the State House Hall of Flags. Michigan runs a Save the Flags program with rotating display at the Capitol. Minnesota's Historical Society holds the First Minnesota's colors associated with Gettysburg.

Fly it on Massachusetts’s birthday

Massachusetts became the 6th state on February 6, 1788. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Massachusetts flag has an official reason to go up.

Have it on hand before the date arrives and it is on the flagpole in time. The full state-by-state list is on our state birthdays page.

Nylon or polyester in Massachusetts

Polyester on the coast and in Boston, the windiest major American city at about 12.3 to 12.5 miles per hour, plus Cape Cod salt. Nylon acceptable in the sheltered interior at Worcester and Springfield.

For scale, the National Weather Service ultraviolet index forecast for Boston on July 23, 2026 was 8 at solar noon, in the very high band. That is the sun this flag has to survive.

A house flag at fifteen square feet lives or dies on material choice for two reasons: flying in light wind, and drying speed after rain.

What you have here is the nylon, appropriate for the sheltered and moderate wind sites listed above, for any house bracket, and for anywhere the flag is brought down during storms. Two things decide it: it is light, flying on an ordinary breeze rather than going limp, and it dries fast, which is the defense against mildew in humidity. The trade is ultraviolet durability — nylon’s amide bonds break under sun, fading and weakening faster than polyester, and it loses about a tenth of its strength wet. For an exposed site on the list above, the polyester version is worth a look instead.

One more consideration, learned by most people only after a repeat purchase: a nylon flag moves in conditions where polyester hangs still. If the flag needs to actually be flying — a calm morning, a holiday, a funeral, a ceremony — that is an argument for nylon even on a site where polyester would technically outlast it. A flag that just hangs there has failed just as much as one that frays.

Institutions commonly cite the American Legion’s figure: the federal government expects about ninety days from a flag flown daily sunrise to sunset, and roughly a quarter of that flown around the clock. On the ground, retailers report three to six months for nylon flown daily, four to eight for polyester, and one to three years for occasional flying. Take these as working estimates, not warranties — exposure can move them a long way in either direction.

How the 3x5 Feet is built

This size fails at the fly end first, and sooner than it should on most 3x5 foot flags, because this size gets bought on price more than any other. Four rows of lock stitching at the fly end is what separates one season from three.

Here is the arithmetic: 15 square feet of nylon at roughly two ounces a square yard. A thirty mile an hour wind sends the fly end moving faster than the wind itself, since the wave traveling toward the tip picks up speed as it goes — which is why the tip wears out first, and why the fly end's stitching count is the figure to check on any listing.

One person puts it up and takes it down. It folds into a drawer. If you are rotating two flags monthly, this is the size where that habit costs you nothing but a minute.

A lock stitch ties into the stitch next to it, so one broken thread does not unzip the whole seam — it just stops. 4 rows is not 4 times the strength; it is 3 backups. The heading is an inch and a half of reinforced heavy duty white material, holding two solid brass grommets. Fifteen square feet of sail area works those grommets hard on a windy site.

This flag is commercial grade nylon, light enough to move in a gentle breeze, and it sheds water instead of soaking it up, drying fast — which matters, since a wet flag is a heavy flag that works its own seams harder. UV resistant, field tested ink is what stands between the flag and the sun, since sun is what fades a flag over time.

Why this flag is harder to make than most

A detailed figure and arms on white. White fields soil faster than any other ground, and the figure’s detail is where cheap versions fail.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Massachusetts flag placed 38, at 4.78 out of 10.

Will it fit my flagpole?

Built for the most common residential pairing in the country: a five or six foot house bracket, or an in-ground flagpole between fifteen and twenty feet.

Questions about the 3x5 Feet

What size flagpole does a 3x5 foot flag need? A six foot house bracket, or an in-ground flagpole of fifteen to twenty feet. It is the most common residential pairing in the country.

How long does a 3x5 foot nylon flag last outside? The federal working figure is about ninety days for a flag flown daily from sunrise to sunset, and about a quarter of that flown around the clock. Retailers commonly see three to six months in daily use and one to three years flown on occasions only.

Is this flag printed or sewn? The design is printed in UV resistant ink on one side and reads through in reverse on the back, which is how nearly every state flag sold in the country is made. The construction, the heading, the stitching and the grommets are sewn.

Why this size gets replaced most

This size is not inherently weaker. It is the one most commonly sold on price, so most of them are built cheaply. A 3x5 foot flag with only one or two rows of fly-end stitching frays in a season and loses six inches by the next. Construction explains the entire difference.

Specifications

• Size: 3x5 Feet
• Area: 15 square feet
• Material: 100 percent nylon
• Fly end: 4 rows of lock stitching
• Heading: heavy duty white, reinforced, 1-1/2 inch
• Finish: Brass Grommets
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

The proportion that makes both tables work is simple: length equal to roughly a quarter to a third of the flagpole’s height. Sitting between two sizes is common, and the choice there is really a trade between a flag that flies often and one that is seen from a distance.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

Push the flagpole past a hundred feet and the same ratio still applies, but it stops being a simple lookup: the flag, the truck, the halyard, the foundation and the wind load need to be engineered as a unit, and skipping that step damages the flagpole before it damages the flag. A number of famous large flags deliberately break the rule of thumb, on an engineer’s word rather than a table’s.

What is on the website is not the limit of what we carry. Any size in the tables above can be ordered, listed or not.

About the back of the flag

A printed flag's reverse face is a mirror image of the front, and that is standard, not a fault — it describes most of the flags flown across the country. Double sided construction, which reads correctly from either face, sews two flags together with a liner and roughly doubles both weight and price. Single sided remains standard, and correct, unless a state's statute specifically calls for double sided.

Flying it with the United States flag

Section 7 of Title 4, the United States Flag Code, addresses this directly: the United States flag is never outranked in position, staying above every other flag and to the right at the same level, which reads as the viewer’s left. Same-height flagpoles put the United States flag on the viewer’s left with matching flag sizes; different heights put it on the taller pole; one flagpole with two flags puts it at the top. There is no legal penalty for civilians under the Flag Code, but it is what every institution follows anyway.

Buy two and they both last longer

Keep two flags and swap them monthly. That single habit will outlast three flags run to destruction, since resting fabric recovers and the fly end is spared the repeated wear of constant flying. Take the flag down ahead of severe weather, since one bad storm night can outdo six calm months. Watch the fly end rather than the center; a little stitching early saves a whole season.

For cities, counties, schools and agencies

Fire and police departments, school districts, courthouses, municipalities and state agencies are all regular buyers of our state flags. Tax exempt purchasing is set up through the tax exempt page, and quantities, replacement schedules or an unlisted size are handled through the contact page.

Why buy it from us

We run a small American company and stock the flags we sell. Each one is made in the United States, printed in UV resistant ink, and built to the construction described above instead of built to hit a lower price. One durable flag beats three that fail, in our view. Free shipping applies to orders over twenty five dollars.