FORTISVEX
FORTISVEX Utah State Flag 6x10 Feet Nylon - Made in USA with Brass Grommets
- MPN:
- FPAMSTUTNYL6x10G
- Availability:
- Free Shipping* https://fortisvex.com/shipping-returns-terms/
- Shipping:
- Calculated at Checkout
Description
A 6x10 foot flag is where a state flag stops being residential. Sixty square feet is a commercial flag on a commercial flagpole, and it is the last size finished with grommets rather than rope.
This is the Utah state flag at 6x10 Feet in nylon, made in the United States and finished with brass grommets.
Built to the Utah flag specification
The Utah flag is set out in Senate Bill 31 of 2023, signed March 21, 2023 and effective March 9, 2024, Utah State Flag Day, 113 years after the 1911 original. It is horizontal bands of blue, white and red, with the white forming mountain peaks, and a gold hexagon containing a gold beehive and a white five-pointed star.
Adopted through the 2022 More Than A Flag campaign, which drew 7,031 total submissions including 5,702 flag designs, 2,500 of them from students, from all 29 counties.
The statute for this flag describes the design, the colors and the seal or emblem, but it does not fix an overall size that a modern outdoor flag has to match. That is the normal position across most of the country, and it is why every manufacturer builds state flags in the same standard sizes.
We reproduce that design faithfully, in the standard outdoor flag sizes the whole industry uses and that the states themselves buy. What matters on an outdoor flag is that the colors, the seal and the emblems are right, and they are.
The law that defines it, in its own words
Utah Code Section 63G-1-501, State flag, Description, Image, Display reads:
(1) The state flag of Utah shall be a rectangle that has a width to length ratio of three to five and contain the following: (a) two irregular, horizontal lines dividing the flag into three separate segments, of which: (i) the top segment: (A) is located above the higher horizontal line; and (B) is shaded in blue; (ii) the middle segment: (A) is located between the two horizontal lines; (B) is shaded in white; (C) at the higher horizontal line, takes the shape of a mountain with five peaks, the center peak being the tallest and following the shape of the highest point of the hexagon described in Subsection (1)(b); and (D) at the lower horizontal line, follows the shape of the lowest point of the hexagon described in Subsection (1)(b); and (iii) the bottom segment: (A) is located below the lower horizontal line; and (B) is shaded in red; (b) one hexagon that: (i) is shaded in blue; (ii) contains a smaller gold hexagon outline; and (iii) is placed within the center of the middle segment described in Subsection (1)(a)(ii); (c) one beehive that: (i) is shaded in gold; (ii) contains five hive sections with a small semicircle removed from the center of the base of the lowest section; and (iii) is placed within the center of the hexagon described in Subsection (1)(b); and (d) one five-pointed Utah star that: (i) is shaded in white; and (ii) is placed below the center of the beehive described in Subsection (1)(c).
The prior 1911 flag is retained as the historic state flag under Section 63G-1-503.
You do not have to take our word for any of that. Read Utah Code Section 63G-1-501 in full at the Utah Legislature, and check what we sell against it.
This is the flag we make. Not an approximation of it.
What is on it and what it means
The beehive is industry and community, and the settler arrival of 1847. The hexagon is the people’s strength and unity. The star marks statehood in 1896. Red is southern Utah’s red rock, white the mountains and snow, blue the sky.
What most listings get wrong
The pre-2024 seal-on-blue flag is now the historic flag. It still flies at the Capitol but it is not the state flag. Some sources date this design to 2023 because it was signed then, but it became official March 9, 2024.
This flag is new. It took effect March 9, 2024, and the seal flag it replaced is now designated the historic flag.
Where the Utah flag flies
By the governor's 2023 executive order, Utah's historic state flag flies continuously atop the State Capitol, above the new state flag when both are flown together, and both fly on separate poles on the Capitol grounds daily. Big Betsy, seventy eight by one hundred and fifty feet and about four hundred pounds, was made by Colonial Flag Company of Sandy and is flown by the nonprofit Follow the Flag over Grove Creek Canyon in Pleasant Grove each Fourth of July since 2017. It is documented as the largest free flying United States flag in existence, larger than the George Washington Bridge flag.
Fly it on Utah’s birthday
Utah became the 45th state on January 4, 1896. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Utah flag has an official reason to go up.
Buy it now and it is on the flagpole for the day. The full list of state birthdays is on our state birthdays page.
Nylon or polyester in Utah
Nylon in the sheltered Wasatch Front valleys at Salt Lake City and Provo. Polyester in the high desert and canyon wind zones, and at St. George for ultraviolet.
At sixty square feet this is a commercial flag, and on the exposed sites above the choice of flag material is the difference between one season and three.
This listing is the nylon. It is the right choice for the sheltered and moderate wind sites named above, on any house bracket, and anywhere the flag comes down in storms. Two things decide that. Nylon is light, so it flies on the breeze most yards actually get instead of hanging limp, and it dries fast, which is what fights mildew in a humid climate. What it gives up is ultraviolet life: nylon’s amide bonds absorb ultraviolet and break, so under hard sun it loses strength and color faster than polyester, and it loses roughly a tenth of its strength while it is wet. If your site is one of the exposed ones above, look at the polyester version of this flag instead.
One more thing that decides it, and it is the part people only learn after buying twice: a nylon flag flies on days a polyester flag will not. If the flag matters to you on a still morning, on a holiday, at a funeral, at a ceremony, that is an argument for this one even on a site where the polyester would last longer. A flag that hangs is not doing its job either.
The working benchmark most institutions use comes from the American Legion, which reports that the United States government expects a flag flown daily from sunrise to sunset to last about ninety days, and one flown around the clock about a quarter of that. Retailer experience runs three to six months for nylon and four to eight for polyester flown daily, and one to three years for a flag flown only on occasions. Those are working figures, not a warranty, and exposure moves them a long way in either direction.
How the 6x10 Feet is built
This is the size where the stitching goes to six rows on the fly end rather than four. Sixty square feet generates far more force at the tip than a house flag ever will, and four rows is no longer enough.
The arithmetic behind that: 60 square feet of nylon at roughly two ounces a square yard. In a thirty mile an hour wind the fly end of a flag this size travels faster than the wind itself, because the wave running out to the tip accelerates as it goes. That is why the tip wears out first and why the stitching count at that end is the number worth reading on any listing.
Two people to fold properly, and a clear patch of ground or a clean surface. Sixty square feet does not fold on a tailgate.
Lock stitching means each stitch is knotted into the next, so a broken thread stops where it broke rather than unzipping the seam. 6 rows does not mean 6 times the strength; it means 5 backups. The heading is two inches of heavy duty white, reinforced, with two solid brass grommets and tooth washers. At this size the heading is the part under the most sustained strain.
The flag material is commercial grade nylon. It is light enough to fly in a gentle breeze, it sheds water rather than holding it, and it dries fast, which matters because a flag that stays wet stays heavy and works its seams harder. The ink is UV resistant and field tested; sun is what takes a flag’s color, and the ink decides how long it holds.
A design that reproduces cleanly
A clean geometric design replacing a detailed seal. It costs less to make than the flag it replaced and it will last considerably longer.
Will it fit my flagpole?
It suits an in-ground flagpole of thirty to forty feet.
Questions about the 6x10 Feet
What size flagpole for a 6x10 foot flag? Thirty to forty feet. At this size the flag is commercial and the flagpole has to be an in-ground pole with a truck and halyard.
Why does the 6x10 foot flag have grommets when the 8x12 foot flag has a rope? Sixty square feet is the most two brass grommets can be asked to carry. Above this the load is spread along a rope sewn the length of the heading.
Does a 6x10 foot flag need a heavier flagpole? A sixty square foot flag in a gust loads a flagpole hard. If the pole was sold for a 4x6 foot or 5x8 foot flag, check its rating before stepping up.
The last size on grommets
Everything above this is finished with a rope sewn the full length of the heading rather than two grommets, because two points can no longer carry the load. The 6x10 foot flag sits right at that boundary, which is why it runs six rows of stitching and a two inch heading while still using grommets.
Specifications
- Size: 6x10 Feet
- Area: 60 square feet
- Material: 100 percent nylon
- Fly end: 6 rows of lock stitching
- Heading: heavy duty white, reinforced, 2 inch
- Finish: Brass Grommets
- Ink: UV resistant, field tested
- Made in the United States by FORTISVEX
Which size do I need?
The rule behind both tables below is that a flag’s length should run about a quarter to a third of the flagpole’s height. Where two sizes both fit, the smaller one flies more often and lasts longer, and the larger one reads from further away.
If you know your flagpole height, start here.
- 6 Feet house bracket: 2x3 Feet or 3x5 Feet
- 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
- 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
- 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
- 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
- 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
- 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
- 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
- 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
- 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
- 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
- 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
- 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole
If you know your flag size, start here.
- 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
- 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
- 4x6 Feet: 18 to 25 Feet in-ground flagpole
- 5x8 Feet: 25 to 35 Feet flagpole
- 6x10 Feet: 30 to 40 Feet flagpole
- 8x12 Feet: 40 to 50 Feet flagpole
- 10x15 Feet: 50 to 60 Feet flagpole
- 12x18 Feet: 60 to 80 Feet flagpole
- 15x25 Feet: 80 to 100 Feet flagpole
- 20x30 Feet: 100 to 120 Feet flagpole
- 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
- 30x50 Feet: 150 to 200 Feet flagpole
- 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
- 50x80 Feet: 240 Feet and above, engineered to the flagpole
The quarter to a third rule holds all the way up, but above about a hundred feet the flag and the flagpole stop being two purchases and become one engineered system: the truck, the halyard, the foundation and the wind load all have to be specified together, and a flag bought without checking the flagpole rating damages the flagpole first. Several famous installations deliberately fly longer than the rule, which is a choice made with an engineer rather than from a chart.
We carry the full range whether or not every size appears on this website. If the size you need is not listed, we can still supply it.
About the back of the flag
A printed flag reads correctly from the front and reversed from the back. That is normal and it is true of almost every flag flown in the country. A flag that reads correctly from both sides is a double sided flag, built as two flags sewn together with a liner between them, and it costs roughly twice as much and weighs roughly twice as much. Unless the statute for a particular state requires it, single sided is the standard and the right choice.
Flying it with the United States flag
The United States Flag Code, Title 4, Section 7, governs this. No other flag goes above the United States flag, or to its right when on the same level, which is the viewer’s left. On two flagpoles of the same height the United States flag takes the viewer’s left and both flags should be the same size. If the flagpoles differ in height, the United States flag goes on the taller one. On a single flagpole carrying two flags the United States flag goes at the top. The Flag Code is advisory for civilians and carries no penalty, but it is the standard every institution follows.
Buy two and they both last longer
Fly one for a month, then swap. Two flags rotated monthly will outlast three flags flown to destruction, because the fabric recovers when it rests and the fly end stops taking the same abuse in the same place. Take it down in severe weather; a flag left up through a real windstorm can take more damage in one night than in six normal months. And watch the fly end rather than the middle, because a few minutes with a needle when the fraying starts buys another season.
For cities, counties, schools and agencies
We supply state flags to municipalities, school districts, fire and police departments, courthouses and state agencies. Tax exempt accounts are handled through the tax exempt page. For quantities, replacement schedules or sizes not listed, use the contact page.
Why buy it from us
We are a small American company and we stock what we sell. Every flag here is made in the United States, printed in UV resistant ink, and finished to the construction described above rather than to a price point. We would rather sell you one flag that lasts than three that do not. Free shipping on orders over twenty five dollars.
Additional Information
Material Type: |
Commercial Nylon |
Flag Size: |
6x10 Feet |
Made in: |
USA |
Finish: |
Brass Grommets |