FORTISVEX South Carolina State Flag 6x10 Feet Nylon - Made in USA with Brass Grommets

Once you reach 6x10 feet you have left house flags behind. Sixty square feet is commercial size for a commercial flagpole, and this is the last size built with grommets before the construction switches to rope.

This is the South Carolina state flag at 6x10 Feet (60 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the South Carolina flag specification

The South Carolina flag is set out in no detailed statutory design since 1940, which leaves the shape, the size and the shade of blue formally unspecified. It is a blue field with a white palmetto tree and a white crescent in the upper hoist.

Roots in Moultrie’s Revolutionary flag of 1775, with the current palmetto and crescent design adopted January 28, 1861 after a gold palmetto version that lasted two days.

Design, colors and the seal or emblem are what this state's statute defines; a fixed size for an outdoor flag is not among them. Most of the country works the same way, and that is why manufacturers all build to the same standard sizes.

The reproduction here is faithful to the design, in the standard outdoor sizes used industry wide and bought by the states themselves. On an outdoor flag, correct colors, seal and emblems are what counts, and that is what you get.

The law that defines it, in its own words

South Carolina Code Section 1-1-710 reads:

The color indigo blue worn on the uniform of Colonel William Moultrie's soldiers and adopted as the background of the South Carolina State flag, is designated as the official color of the State of South Carolina.

The South Carolina Code contains no design specification for the flag; this color provision is the only statutory statement about its appearance. A 2021 bill proposing one did not become law, which is why palmetto and crescent shapes vary between manufacturers.

You do not have to take our word for any of that. Read South Carolina Code Section 1-1-710 in full at the South Carolina Legislature, and check what we sell against it.

That is the flag we build, not a rough version of it.

What is on it and what it means

The palmetto is Fort Moultrie’s palmetto log walls, which absorbed British cannon fire in 1776 rather than splintering. The crescent is the silver gorget worn on Revolutionary soldiers’ caps.

What most listings get wrong

Because the law says almost nothing, manufacturers’ palmettos and crescents vary widely and no two brands match. A standardization effort between 2018 and 2021 stalled and nothing is settled. This is the one state where asking what the official design is has no clean answer.

It is the only state whose flag has no statutory design specification, which is why versions differ between suppliers.

Where the South Carolina flag flies

Fort Sumter and Fort Moultrie National Historical Park holds the Fort Sumter garrison flag, a thirty three star flag wind damaged the night of April 11, 1861, the Fort Sumter storm flag that flew during the thirty four hour bombardment opening the Civil War on April 12, 1861, and the Palmetto Guard flag, the first Confederate aligned flag over the fort on April 14, 1861. All three were removed from display in September 2023 for long term conservation. The Revolutionary War Fort Moultrie flag is referenced by the South Carolina State Museum in Columbia.

Fly it on South Carolina’s birthday

South Carolina became the 8th state on May 23, 1788. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the South Carolina flag has an official reason to go up.

Buy it in time and it goes up on the day it matters. Every state’s date is on our state birthdays page.

Nylon or polyester in South Carolina

Nylon in the Midlands and Upstate at Columbia and Greenville. Polyester on the coast at Charleston and Myrtle Beach.

At sixty square feet, firmly commercial territory, the material choice on an exposed site above decides between one season and three.

You are looking at the nylon here, the right pick for the sheltered and moderate wind sites named above, for any house bracket, and for anywhere the flag gets brought in during storms. Two things make that case. It is light enough to move on the breeze most yards actually get rather than hang limp, and it dries fast, which keeps mildew away in a humid climate. What it trades away is ultraviolet durability — nylon’s amide bonds break down under ultraviolet light, losing strength and color faster than polyester, and it loses roughly a tenth of its strength while wet. For one of the exposed sites named above, the polyester version is the better fit.

One more thing that decides it, and it is the part people only learn after buying twice: a nylon flag flies on days a polyester flag will not. If the flag matters to you on a still morning, on a holiday, at a funeral, at a ceremony, that is an argument for this one even on a site where the polyester would last longer. A flag that hangs is not doing its job either.

The figure most institutions use is from the American Legion, citing the United States government's expectation of about ninety days for a flag flown daily from sunrise to sunset, and roughly a quarter of that around the clock. Retailers see three to six months in practice for nylon flown daily, four to eight for polyester, and one to three years when flown occasionally. These are practical figures, not a guarantee, and real-world exposure shifts them considerably.

How the 6x10 Feet is built

Six rows of lock stitching replace four at this size, because sixty square feet generates far more force at the fly end than any house flag experiences. Four rows would not hold.

Here is the arithmetic: 60 square feet of nylon at roughly two ounces a square yard. A thirty mile an hour wind sends the fly end moving faster than the wind itself, since the wave traveling toward the tip picks up speed as it goes — which is why the tip wears out first, and why the fly end's stitching count is the figure to check on any listing.

Two people to fold properly, and a clear patch of ground or a clean surface. Sixty square feet does not fold on a tailgate.

Lock stitching means each stitch is knotted into the next, so a broken thread stops where it broke rather than unzipping the seam. 6 rows does not mean 6 times the strength; it means 5 backups. This size puts the most sustained strain on the heading of anything on the flag, so it is built two inches wide, heavy duty white and reinforced, with brass grommets and tooth washers.

This flag is commercial grade nylon, light enough to move in a gentle breeze, and it sheds water instead of soaking it up, drying fast — which matters, since a wet flag is a heavy flag that works its own seams harder. UV resistant, field tested ink is what stands between the flag and the sun, since sun is what fades a flag over time.

A design that reproduces cleanly

A palmetto silhouette and a crescent, with no seal. The variation between suppliers is a legal gap rather than a manufacturing one.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The South Carolina flag placed 10, at 7.16 out of 10.

Will it fit my flagpole?

This size wants an in-ground flagpole between thirty and forty feet.

Questions about the 6x10 Feet

What size flagpole for a 6x10 foot flag? Thirty to forty feet. At this size the flag is commercial and the flagpole has to be an in-ground pole with a truck and halyard.

Why does the 6x10 foot flag have grommets when the 8x12 foot flag has a rope? Sixty square feet is the most two brass grommets can be asked to carry. Above this the load is spread along a rope sewn the length of the heading.

Does a 6x10 foot flag need a heavier flagpole? A sixty square foot flag in a gust loads a flagpole hard. If the pole was sold for a 4x6 foot or 5x8 foot flag, check its rating before stepping up.

The last size on grommets

Everything above this is finished with a rope sewn the full length of the heading rather than two grommets, because two points can no longer carry the load. The 6x10 foot flag sits right at that boundary, which is why it runs six rows of stitching and a two inch heading while still using grommets.

Specifications

• Size: 6x10 Feet
• Area: 60 square feet
• Material: 100 percent nylon
• Fly end: 6 rows of lock stitching
• Heading: heavy duty white, reinforced, 2 inch
• Finish: Brass Grommets
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

Underneath both tables is a single ratio: a flag a quarter to a third the flagpole’s height. When you land between two rows, that is a real choice, not a rounding error — smaller flies more often, bigger reads further.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

Push the flagpole past a hundred feet and the same ratio still applies, but it stops being a simple lookup: the flag, the truck, the halyard, the foundation and the wind load need to be engineered as a unit, and skipping that step damages the flagpole before it damages the flag. A number of famous large flags deliberately break the rule of thumb, on an engineer’s word rather than a table’s.

Every size in both tables can be ordered, listed here or not. If the size you want does not appear on the website, contact us and we can still supply it.

About the back of the flag

It is normal for a printed flag to read backward from behind — almost every flag flown in America works this way. A flag that reads correctly from both sides is double sided: two flags sewn together with a liner, at roughly double the weight and cost. Single sided stays the standard and the right choice except where a state’s own law requires the double sided build.

Flying it with the United States flag

Governing this is Title 4, Section 7 of the United States Flag Code, which keeps the United States flag in the position of honor: never below another flag, never to the right of one at the same level, meaning never right of the viewer’s left. Two flagpoles at equal height put the United States flag at the viewer’s left with equal-sized flags; unequal heights put it on the taller pole; a single flagpole with two flags carries it at the top. No penalty attaches for private citizens under the Code, but it is what institutions follow as standard practice.

Buy two and they both last longer

Rotate two flags on a monthly cycle and they will outlast three flags flown until they fail, because the fabric gets a rest and the fly end is not taking the same beating in the same spot every day. Bring it down before severe weather; one real windstorm can do more damage overnight than six ordinary months. Check the fly end, not the middle — a few minutes of stitching at the first sign of fraying buys another season.

For cities, counties, schools and agencies

Municipalities, school districts, fire and police departments, courthouses and state agencies all buy state flags from us regularly. The tax exempt page handles tax exempt accounts, and the contact page is the route for quantity orders, replacement schedules or a size not shown here.

Why buy it from us

We are a small, American-based company that stocks what it lists. Every flag is made in the United States, uses UV resistant ink, and is finished to the standard described above rather than cut down to hit a price. One flag that lasts is worth more to us than three that do not. Free shipping applies over twenty five dollars.