South Carolina 8x12 Feet Nylon State Flag Made in USA

This is an institutional size. Ninety six square feet of flag, flown on a forty to fifty foot flagpole outside a civic building, a campus, a large commercial site — nobody buys this size without meaning to.

This is the South Carolina state flag at 8x12 Feet (96 square feet) in nylon, made in the United States and finished with a sewn rope and plated steel thimbles.

Built to the South Carolina flag specification

The South Carolina flag is set out in no detailed statutory design since 1940, which leaves the shape, the size and the shade of blue formally unspecified. It is a blue field with a white palmetto tree and a white crescent in the upper hoist.

Roots in Moultrie’s Revolutionary flag of 1775, with the current palmetto and crescent design adopted January 28, 1861 after a gold palmetto version that lasted two days.

This state's statute covers the design, the colors and the seal or emblem, and stops there — it sets no overall size for a modern outdoor flag to match. Most states take the same approach, which is exactly why every manufacturer builds state flags in the same standard sizes.

We build a faithful reproduction of that design at the standard outdoor sizes the industry uses, the same sizes states order for themselves. Correct colors, seal and emblems are what an outdoor flag has to get right, and that is what this one gets right.

The law that defines it, in its own words

South Carolina Code Section 1-1-710 reads:

The color indigo blue worn on the uniform of Colonel William Moultrie's soldiers and adopted as the background of the South Carolina State flag, is designated as the official color of the State of South Carolina.

The South Carolina Code contains no design specification for the flag; this color provision is the only statutory statement about its appearance. A 2021 bill proposing one did not become law, which is why palmetto and crescent shapes vary between manufacturers.

You do not have to take our word for any of that. Read South Carolina Code Section 1-1-710 in full at the South Carolina Legislature, and check what we sell against it.

This is the flag we make. Not an approximation of it.

What is on it and what it means

The palmetto is Fort Moultrie’s palmetto log walls, which absorbed British cannon fire in 1776 rather than splintering. The crescent is the silver gorget worn on Revolutionary soldiers’ caps.

What most listings get wrong

Because the law says almost nothing, manufacturers’ palmettos and crescents vary widely and no two brands match. A standardization effort between 2018 and 2021 stalled and nothing is settled. This is the one state where asking what the official design is has no clean answer.

It is the only state whose flag has no statutory design specification, which is why versions differ between suppliers.

Where the South Carolina flag flies

Fort Sumter and Fort Moultrie National Historical Park holds the Fort Sumter garrison flag, a thirty three star flag wind damaged the night of April 11, 1861, the Fort Sumter storm flag that flew during the thirty four hour bombardment opening the Civil War on April 12, 1861, and the Palmetto Guard flag, the first Confederate aligned flag over the fort on April 14, 1861. All three were removed from display in September 2023 for long term conservation. The Revolutionary War Fort Moultrie flag is referenced by the South Carolina State Museum in Columbia.

Fly it on South Carolina’s birthday

South Carolina became the 8th state on May 23, 1788. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the South Carolina flag has an official reason to go up.

Buy it now and it is on the flagpole for the day. The full list of state birthdays is on our state birthdays page.

Nylon or polyester in South Carolina

Nylon in the Midlands and Upstate at Columbia and Greenville. Polyester on the coast at Charleston and Myrtle Beach.

This size, ninety six square feet, puts real load on a flagpole. On the exposed sites above polyester is not optional — it is the only sensible call, and the hardware needs to be rated for it.

What you have here is the nylon, appropriate for the sheltered and moderate wind sites listed above, for any house bracket, and for anywhere the flag is brought down during storms. Two things decide it: it is light, flying on an ordinary breeze rather than going limp, and it dries fast, which is the defense against mildew in humidity. The trade is ultraviolet durability — nylon’s amide bonds break under sun, fading and weakening faster than polyester, and it loses about a tenth of its strength wet. For an exposed site on the list above, the polyester version is worth a look instead.

One more thing that decides it, and it is the part people only learn after buying twice: a nylon flag flies on days a polyester flag will not. If the flag matters to you on a still morning, on a holiday, at a funeral, at a ceremony, that is an argument for this one even on a site where the polyester would last longer. A flag that hangs is not doing its job either.

Most institutions work from the same benchmark, reported by the American Legion: the United States government's expectation is roughly ninety days for a flag flown daily sunrise to sunset, and about a quarter of that for one flown around the clock. In practice, retailers report three to six months for nylon flown daily, four to eight for polyester, and one to three years for a flag flown only on occasions. These are working numbers, not a guarantee, and exposure can move them substantially either way.

How the 8x12 Feet is built

This size gets six rows of lock stitching on the fly end and zig zag stitched corners, since a straight-sewn corner is exactly what a season of wind will work open.

Here is the arithmetic: 96 square feet of nylon at roughly two ounces a square yard. A thirty mile an hour wind sends the fly end moving faster than the wind itself, since the wave traveling toward the tip picks up speed as it goes — which is why the tip wears out first, and why the fly end's stitching count is the figure to check on any listing.

Whether folding on the ground or clipping onto the flagpole, this is two person work. Ninety six square feet in a gust can knock a lone worker off balance.

Each lock stitch knots into the one beside it, so a broken thread stays broken right where it snapped instead of unraveling the whole seam. 6 rows is not 6 times the strength — it is 5 backups. There are no grommets at this size — a nylon rope sewn the full heading length, finished with two plated steel thimbles, carries the load rather than letting it tear at two points.

Nylon, commercial grade, is what this flag is made from. It is light enough to move in a gentle breeze, sheds rather than soaks up water, and dries quickly — a wet flag is a heavier flag, harder on its own seams. The ink is UV resistant and field tested, because sun exposure is what actually fades a flag.

A design that reproduces cleanly

A palmetto silhouette and a crescent, with no seal. The variation between suppliers is a legal gap rather than a manufacturing one.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The South Carolina flag placed 10, at 7.16 out of 10.

Will it fit my flagpole?

It suits an in-ground flagpole of forty to fifty feet, on a truck and halyard rather than a bracket.

Questions about the 8x12 Feet

What size flagpole for an 8x12 foot flag? Forty to fifty feet, on a truck and halyard rated for the load. This is an institutional flag.

What are the thimbles for? The rope sewn through the heading ends in two plated steel thimbles. The halyard snaps clip to the thimbles, so the pull runs through the rope along the whole hoist rather than tearing at two grommets.

Can an 8x12 foot flag fly around the clock? It can, on a lit flagpole, but a flag flown twenty four hours lasts roughly a quarter as long as one flown sunrise to sunset. Budget for that.

Why the grommets disappear

Two grommets concentrate ninety six square feet of pull onto two small brass rings. A rope sewn the length of the heading spreads that load across the entire hoist and lets the thimbles take the attachment. It is more expensive to build and it is the only way a flag this size survives.

Specifications

• Size: 8x12 Feet
• Area: 96 square feet
• Material: 100 percent nylon
• Fly end: 6 rows of lock stitching
• Heading: heavy duty white, reinforced, 2 inch
• Finish: Rope and Thimbles
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

One rule sits under both tables: the flag should run about a quarter to a third the height of the flagpole. On the border between two rows, the smaller flag flies more and lasts longer; the larger one is the one you can see from the road.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

The ratio does not fail at a hundred feet, but the transaction does change: past that height the flag, the flagpole, the truck, the halyard and the foundation have to be engineered together, and a flag ordered without checking the flagpole rating tends to cost the flagpole first. A few of the country’s best known flags deliberately exceed the rule, on the strength of an engineer’s calculation rather than a chart.

The website does not show every size we can supply. If yours is missing from the listing, the full range above is still available to order.

About the back of the flag

It is normal for a printed flag to read backward from behind — almost every flag flown in America works this way. A flag that reads correctly from both sides is double sided: two flags sewn together with a liner, at roughly double the weight and cost. Single sided stays the standard and the right choice except where a state’s own law requires the double sided build.

Flying it with the United States flag

The United States Flag Code, Title 4, Section 7, governs this. No other flag goes above the United States flag, or to its right when on the same level, which is the viewer’s left. On two flagpoles of the same height the United States flag takes the viewer’s left and both flags should be the same size. If the flagpoles differ in height, the United States flag goes on the taller one. On a single flagpole carrying two flags the United States flag goes at the top. The Flag Code is advisory for civilians and carries no penalty, but it is the standard every institution follows.

Buy two and they both last longer

The simplest way to make a flag last is to own two and rotate them monthly — that alone outlasts three flags flown to failure, because rest lets the fabric recover and the fly end is not hammered day after day. Take it down ahead of real storms, since one bad night of wind can undo six good months. Watch the fly end, where fraying starts, and a quick repair there is worth a whole extra season.

For cities, counties, schools and agencies

We supply state flags to municipalities, school districts, fire and police departments, courthouses and state agencies. Tax exempt accounts are handled through the tax exempt page. For quantities, replacement schedules or sizes not listed, use the contact page.

Why buy it from us

We are a small American company and we stock what we sell. Every flag here is made in the United States, printed in UV resistant ink, and finished to the construction described above rather than to a price point. We would rather sell you one flag that lasts than three that do not. Free shipping on orders over twenty five dollars.