FORTISVEX Connecticut State Flag 4x6 Feet Nylon - Made in USA with Brass Grommets

The 4x6 foot flag is where a house bracket stops being enough. It needs an in-ground flagpole, and that is the real reason people move up to it — not appearance, just size.

This is the Connecticut state flag at 4x6 Feet (24 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the Connecticut flag specification

The Connecticut flag is set out in Connecticut General Statutes Section 3-107, with the arms at Section 3-105. It is an azure field with a white rococo shield carrying three grapevines and the motto Qui Transtulit Sustinet. The statute gives exact dimensions of five feet six inches by four feet four inches, describing the silk ceremonial color rather than a standard outdoor size.

Adopted in 1897.

Connecticut General Statutes Section 3-107 fixes the flag at five feet six inches by four feet four inches in azure blue silk. That is a ceremonial color from 1897. Nobody makes an outdoor flag in that size and the state itself does not fly one.

Faithfully reproduced, that is the standard we hold this design to, at the outdoor sizes the whole industry uses and states themselves order. What an outdoor flag needs right is the color, the seal and the emblems, and this one has them right.

The law that defines it, in its own words

Connecticut General Statutes Section 3-107 reads:

The following-described flag is the official flag of the state. The dimensions of the flag shall be five feet and six inches in length, four feet and four inches in width. The flag shall be azure blue, charged with an argent white shield of rococo design, having in the center three grape vines, supported and bearing fruit in natural colors. The bordure to the shield shall be in two colors, gold on the interior and silver on the exterior, adorned with natural-colored clusters of white oak leaves (Quercus alba) bearing acorns. Below the shield shall be a white streamer, cleft at each end, bordered by a band of gold within fine brown lines, and upon the streamer in dark blue block letters shall be the motto "QUI TRANSTULIT SUSTINET"; the whole design being the arms of the state.

You do not have to take our word for any of that. Read Connecticut General Statutes Section 3-107 in full at Justia, and check what we sell against it.

This is the actual flag we manufacture, not an approximation.

What is on it and what it means

The motto translates as He Who Transplanted Sustains. The three grapevines trace to a seal of 1711 and stand for the early settlements and the transplantation of the colony itself.

Worth knowing about this flag

The statute specifies a fixed size rather than a ratio, which means a scaled flag is a departure from the letter of the law even though every manufacturer scales it.

Where the Connecticut flag flies

Each holds a significant Civil War battle flag collection. Connecticut's is at the Museum of Connecticut History in Hartford. Illinois has the State Military Museum in Springfield. Massachusetts has the State House Hall of Flags. Michigan runs a Save the Flags program with rotating display at the Capitol. Minnesota's Historical Society holds the First Minnesota's colors associated with Gettysburg.

The Milford Green flagpole, a hundred and ten feet, a fiberglass pole dedicated in 2014 replacing a ninety nine point seven foot steel pole. Milford's mayor described it as the tallest flagpole in the state. It flies a twenty five by thirty foot flag, was gifted by the Devon Rotary, and was made and installed by All American Flagpole of Woonsocket, Rhode Island. The prior notable pole is the hundred foot Newtown flagpole, which stands in the middle of a street intersection.

Fly it on Connecticut’s birthday

Connecticut became the 5th state on January 9, 1788. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Connecticut flag has an official reason to go up.

Get it now so it is flying on the day itself. See every state’s birthday on our state birthdays page.

Nylon or polyester in Connecticut

Nylon inland at Hartford. Polyester on Long Island Sound at Bridgeport, New Haven and Stamford for salt and coastal wind.

Twenty four square feet is where wind load starts to matter in earnest, and the verdict above carries more weight here than on a standard house flag.

The nylon is what you are looking at here — the right choice for the sheltered and moderate wind sites named above, for a house bracket, and for anywhere the flag comes down ahead of storms. Two things settle it. It is light enough to fly on an ordinary yard’s breeze rather than sag, and it dries fast, fighting mildew in humid conditions. What it gives up is resistance to ultraviolet — nylon’s amide bonds break under sun, costing strength and color faster than polyester, and it loses roughly a tenth of its strength while wet. If the site is one of the exposed ones above, the polyester version fits better.

The part most buyers learn only the second time around: nylon flies in wind too light to move polyester. When it matters that the flag is actually moving — a still morning, a holiday, a funeral, a ceremony — that favors nylon even somewhere polyester would last longer. A flag that hangs motionless is not doing its job either, however durable it is.

The number most institutions rely on traces to the American Legion, which reports a roughly ninety-day expectation from the federal government for a flag flown daily sunrise to sunset, and about a quarter of that flown around the clock. Retailer experience puts nylon at three to six months daily, polyester at four to eight, and an occasionally flown flag at one to three years. These figures are practical guidance, not a warranty, and exposure will move them considerably.

How the 4x6 Feet is built

A 4x6 foot flag carries well over half again the area of a 3x5 foot flag, so it catches proportionally more wind and the fly end works harder for it. Four rows of lock stitching, and it needs all four.

Work the numbers and you get 24 square feet of nylon at roughly two ounces a square yard. At thirty miles an hour, the fly end actually outpaces the wind, because the wave running to the tip accelerates along the way — the reason the tip fails first, and the reason fly-end stitching count is the number that matters.

A one person job, technically, but the first windy day taking it down alone will make the size difference clear. Bring it in ahead of weather, not during it.

A lock stitch ties into the stitch next to it, so one broken thread does not unzip the whole seam — it just stops. 4 rows is not 4 times the strength; it is 3 backups. The heading is reinforced heavy duty white, an inch and a half, with brass grommets and tooth washers taking a real load across twenty four square feet.

Commercial grade nylon is the material in this flag. Light enough to catch a gentle breeze, it sheds water rather than holding onto it and dries fast, which keeps a flag from staying heavy and stressing its seams. The ink is UV resistant and field tested, since sun exposure is what determines how long the color lasts.

Why this flag is harder to make than most

A fine rococo shield with three vines and a Latin motto. This is an arms-on-blue design, and the shield detail is where cheap reproductions fall apart first.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Connecticut flag placed 50, at 4.32 out of 10.

Will it fit my flagpole?

An in-ground flagpole between eighteen and twenty five feet is the right fit; a six foot house bracket will leave it dragging and wrapping.

Questions about the 4x6 Feet

What flagpole does a 4x6 foot flag need? An in-ground flagpole of eighteen to twenty five feet. It is too large for a standard house bracket, which is the honest reason to choose it.

Is a 4x6 foot flag worth it over a 3x5 foot flag? Only if the flagpole is tall enough. On a twenty foot flagpole a 3x5 foot flag looks lost and a 4x6 foot flag fills it. On a six foot bracket the 4x6 foot flag will wrap.

Can I fly a 4x6 foot state flag with a 4x6 foot United States flag? Yes, and on two flagpoles of equal height that is the correct pairing, with the United States flag to the viewer’s left.

Where the step up starts to cost you

Going from a 3x5 foot flag to a 4x6 foot flag is where buying cheap begins to be expensive. The extra area means more force at the fly end and more load on the grommets, so a 4x6 Feet built to a budget fails faster than a 3x5 Feet built the same way. This is the size where construction stops being a nicety.

Specifications

• Size: 4x6 Feet
• Area: 24 square feet
• Material: 100 percent nylon
• Fly end: 4 rows of lock stitching
• Heading: heavy duty white, reinforced, 1-1/2 inch
• Finish: Brass Grommets
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

Both tables follow the same logic. A flagpole reads best with a flag whose length falls between a quarter and a third of its height. Where a size could go either way, smaller means more flying days and a longer life, bigger means more visibility at range.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

That same ratio keeps working past a hundred feet, but at that point the flag and the flagpole are no longer separate purchases — the truck, the halyard, the foundation and the wind load all have to be sized together, and a flag chosen without checking the flagpole first damages the pole rather than itself. A handful of well known installations deliberately run past the rule of thumb, and every one of them did it with an engineer, not a chart.

Every size in both tables can be ordered, listed here or not. If the size you want does not appear on the website, contact us and we can still supply it.

About the back of the flag

The back of a printed flag shows the design reversed, not missing. That is true of almost every flag in the country, and it is normal rather than a flaw. Getting both sides to read correctly means sewing two flags together with a liner between them, which roughly doubles the cost and the weight. Single sided is standard practice, and the right choice unless a particular state’s law says otherwise.

Flying it with the United States flag

The United States Flag Code, Title 4, Section 7, governs this. No other flag goes above the United States flag, or to its right when on the same level, which is the viewer’s left. On two flagpoles of the same height the United States flag takes the viewer’s left and both flags should be the same size. If the flagpoles differ in height, the United States flag goes on the taller one. On a single flagpole carrying two flags the United States flag goes at the top. The Flag Code is advisory for civilians and carries no penalty, but it is the standard every institution follows.

Buy two and they both last longer

Rotate two flags on a monthly cycle and they will outlast three flags flown until they fail, because the fabric gets a rest and the fly end is not taking the same beating in the same spot every day. Bring it down before severe weather; one real windstorm can do more damage overnight than six ordinary months. Check the fly end, not the middle — a few minutes of stitching at the first sign of fraying buys another season.

For cities, counties, schools and agencies

Municipalities, school districts, fire and police departments, courthouses and state agencies all buy state flags from us regularly. The tax exempt page handles tax exempt accounts, and the contact page is the route for quantity orders, replacement schedules or a size not shown here.

Why buy it from us

A small American company runs this store, and everything listed here is something we actually stock. Every flag is made in the United States, printed in UV resistant ink, and built to the construction described above rather than built down to a price. We would rather one flag last than sell three that fail early. Free shipping kicks in over twenty five dollars.