FORTISVEX New Hampshire State Flag 4x6 Feet Nylon - Made in USA with Brass Grommets

A 4x6 foot flag is the first size that really needs a flagpole in the ground. It is too large for a standard house bracket, and that is the honest reason to step up to it rather than any question of appearance.

This is the New Hampshire state flag at 4x6 Feet (24 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the New Hampshire flag specification

The New Hampshire flag is set out in New Hampshire Revised Statutes Annotated 3:2, with the seal at 3:8. It is the state seal, showing the frigate USS Raleigh, a granite boulder, a laurel wreath and nine stars, on a blue field.

Adopted in 1909 and modified in 1931.

This state's statute covers the design, the colors and the seal or emblem, and stops there — it sets no overall size for a modern outdoor flag to match. Most states take the same approach, which is exactly why every manufacturer builds state flags in the same standard sizes.

We reproduce that design faithfully, in the standard outdoor flag sizes the whole industry uses and that the states themselves buy. What matters on an outdoor flag is that the colors, the seal and the emblems are right, and they are.

The law that defines it, in its own words

New Hampshire Revised Statutes Section 3:2 reads:

The state flag shall be of the following color and design: The body or field shall be blue and shall bear upon its center in suitable proportion and colors a representation of the state seal. The seal shall be surrounded by a wreath of laurel leaves with nine stars interspersed. When used for military purposes the flag shall conform to the regulations of the United States.

The emblem itself is defined by reference to the state seal, so these words are the frame and not the whole picture.

You do not have to take our word for any of that. Read New Hampshire Revised Statutes Section 3:2 in full at the State of New Hampshire, and check what we sell against it.

That is the flag as we build it. Nothing about it is approximate.

What is on it and what it means

The Raleigh was one of the first warships of the Continental Navy and was built at Portsmouth. The nine stars mark New Hampshire as the ninth state. The granite boulder is the state’s granite.

What most listings get wrong

It is reported to be the only state flag whose seal contains the United States Stars and Stripes, though that claim traces to secondary sources rather than to the state itself, so we will not state it as settled.

Where the New Hampshire flag flies

New Hampshire's distinctive tradition is its own Hall of Flags in the State House, built 1816 to 1819, displaying the tattered battle flags carried by New Hampshire regiments from the Civil War through Vietnam. The flags first arrived in 1866 and moved into the State House in 1900, and their fragile condition has driven ongoing preservation debate. Sources on the collection are largely news and preservation group rather than an official state catalogue, and the count varies by source.

Fly it on New Hampshire’s birthday

New Hampshire became the 9th state on June 21, 1788. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the New Hampshire flag has an official reason to go up.

Get it now so it is flying on the day itself. See every state’s birthday on our state birthdays page.

Nylon or polyester in New Hampshire

Nylon in the sheltered interior at Concord and Manchester. Polyester on the short coast and exposed summits. Mount Washington recorded a 231 mile per hour gust on April 12, 1934, long the fastest surface wind ever measured at a staffed weather station.

Twenty four square feet is where wind load starts to matter in earnest, and the verdict above carries more weight here than on a standard house flag.

You are looking at the nylon here, the right pick for the sheltered and moderate wind sites named above, for any house bracket, and for anywhere the flag gets brought in during storms. Two things make that case. It is light enough to move on the breeze most yards actually get rather than hang limp, and it dries fast, which keeps mildew away in a humid climate. What it trades away is ultraviolet durability — nylon’s amide bonds break down under ultraviolet light, losing strength and color faster than polyester, and it loses roughly a tenth of its strength while wet. For one of the exposed sites named above, the polyester version is the better fit.

One more consideration, learned by most people only after a repeat purchase: a nylon flag moves in conditions where polyester hangs still. If the flag needs to actually be flying — a calm morning, a holiday, a funeral, a ceremony — that is an argument for nylon even on a site where polyester would technically outlast it. A flag that just hangs there has failed just as much as one that frays.

Most institutions work from the same benchmark, reported by the American Legion: the United States government's expectation is roughly ninety days for a flag flown daily sunrise to sunset, and about a quarter of that for one flown around the clock. In practice, retailers report three to six months for nylon flown daily, four to eight for polyester, and one to three years for a flag flown only on occasions. These are working numbers, not a guarantee, and exposure can move them substantially either way.

How the 4x6 Feet is built

A 4x6 foot flag's larger area, over half again a 3x5 Feet's, catches more wind and stresses the fly end harder. That is why it carries four rows of lock stitching rather than fewer.

The arithmetic behind that: 24 square feet of nylon at roughly two ounces a square yard. In a thirty mile an hour wind the fly end of a flag this size travels faster than the wind itself, because the wave running out to the tip accelerates as it goes. That is why the tip wears out first and why the stitching count at that end is the number worth reading on any listing.

One person can still manage this, though the first attempt on a windy day makes the extra size obvious. Take it down before the storm, not in the middle of it.

A lock stitch ties into the stitch next to it, so one broken thread does not unzip the whole seam — it just stops. 4 rows is not 4 times the strength; it is 3 backups. An inch and a half of reinforced heavy duty white heading holds two solid brass grommets and tooth washers, carrying real load at twenty four square feet.

The flag material is commercial grade nylon. It is light enough to fly in a gentle breeze, it sheds water rather than holding it, and it dries fast, which matters because a flag that stays wet stays heavy and works its seams harder. The ink is UV resistant and field tested; sun is what takes a flag’s color, and the ink decides how long it holds.

Why this flag is harder to make than most

A rigged ship on water inside a laurel wreath. Ship rigging is the single hardest thing to reproduce on a flag at any size.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The New Hampshire flag placed 63, at 3.18 out of 10.

Will it fit my flagpole?

Eighteen to twenty five feet of in-ground flagpole suits this size. A standard six foot house bracket will have it dragging and wrapping instead.

Questions about the 4x6 Feet

What flagpole does a 4x6 foot flag need? An in-ground flagpole of eighteen to twenty five feet. It is too large for a standard house bracket, which is the honest reason to choose it.

Is a 4x6 foot flag worth it over a 3x5 foot flag? Only if the flagpole is tall enough. On a twenty foot flagpole a 3x5 foot flag looks lost and a 4x6 foot flag fills it. On a six foot bracket the 4x6 foot flag will wrap.

Can I fly a 4x6 foot state flag with a 4x6 foot United States flag? Yes, and on two flagpoles of equal height that is the correct pairing, with the United States flag to the viewer’s left.

Where the step up starts to cost you

Stepping up from a 3x5 Feet to a 4x6 Feet is where a cheap build starts costing real money. The extra area means more force at the fly end and more load on the grommets, so a budget 4x6 Feet fails faster than a budget 3x5 Feet ever would. Construction stops being optional at this size.

Specifications

• Size: 4x6 Feet
• Area: 24 square feet
• Material: 100 percent nylon
• Fly end: 4 rows of lock stitching
• Heading: heavy duty white, reinforced, 1-1/2 inch
• Finish: Brass Grommets
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

The proportion that makes both tables work is simple: length equal to roughly a quarter to a third of the flagpole’s height. Sitting between two sizes is common, and the choice there is really a trade between a flag that flies often and one that is seen from a distance.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

Push the flagpole past a hundred feet and the same ratio still applies, but it stops being a simple lookup: the flag, the truck, the halyard, the foundation and the wind load need to be engineered as a unit, and skipping that step damages the flagpole before it damages the flag. A number of famous large flags deliberately break the rule of thumb, on an engineer’s word rather than a table’s.

We do not limit ourselves to what is listed on the site. The full range above is available to order, and an unlisted size can still be supplied.

About the back of the flag

A printed flag's reverse face is a mirror image of the front, and that is standard, not a fault — it describes most of the flags flown across the country. Double sided construction, which reads correctly from either face, sews two flags together with a liner and roughly doubles both weight and price. Single sided remains standard, and correct, unless a state's statute specifically calls for double sided.

Flying it with the United States flag

The rule comes from Title 4, Section 7 of the United States Flag Code: no flag is displayed above the United States flag, and none is placed to its right at the same level, which from the viewer’s position means the left. Equal-height flagpoles carry the United States flag on the viewer’s left with matching flag sizes; unequal flagpoles put it on the taller one; a single flagpole with two flags carries it at the top. Civilians face no penalty for departing from the Flag Code, but it is the standard institutions hold to.

Buy two and they both last longer

Buy two flags and swap them every month. That habit alone outlasts three flags flown into the ground, since the material recovers while resting and the fly end is not repeatedly stressed in the same place. Take the flag down for real storms; overnight wind damage can exceed six months of ordinary wear. Inspect the fly end rather than the middle, and a few minutes of repair stitching when fraying starts buys another season.

For cities, counties, schools and agencies

We supply state flags to municipalities, school districts, fire and police departments, courthouses and state agencies. Tax exempt accounts are handled through the tax exempt page. For quantities, replacement schedules or sizes not listed, use the contact page.

Why buy it from us

This is a small American company, and what you see listed is what we actually stock. Every flag is made in the United States, printed with UV resistant ink, and built to the construction described above, not to whatever a price point demands. Selling one flag that lasts beats selling three that fail. Orders over twenty five dollars ship free.