FORTISVEX Maryland State Flag 3x5 Feet Nylon - Made in USA with Brass Grommets

When most people picture a flag, this is the size they mean. It fits the bracket that already came with the house, and it is the single most replaced size in the country.

This is the Maryland state flag at 3x5 Feet (15 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the Maryland flag specification

The Maryland flag is set out in Chapter 48 of the Acts of 1904, effective March 9, 1904, with a gold cross bottony finial made official in 1945. It is a heraldic banner quartering the Calvert arms, gold and black paly with a bend, and the Crossland arms, a red and white quartered cross bottony counterchanged.

Adopted March 9, 1904.

The design, the colors and the seal or emblem are set by statute; the size of a modern outdoor flag is not. That is the case in most of the country, and it is why manufacturers across the industry all build to the same standard sizes.

The reproduction here is faithful to the design, in the standard outdoor sizes used industry wide and bought by the states themselves. On an outdoor flag, correct colors, seal and emblems are what counts, and that is what you get.

The law that defines it, in its own words

Maryland Code, General Provisions, Section 7-202 reads:

(a) The State flag is divided into quarters. (b) The first and fourth quarters are a paly of six pieces, or (gold) and sable (black), and a bend dexter (right diagonal band) counterchanged, so that they consist of six alternating gold and black vertical bars with a diagonal band on which the colors are reversed. (c) The second and third quarters are quartered argent (white) and gules (red), a cross bottony counterchanged, so that they consist of a quartered field of white and red, charged with a Greek cross that has arms terminating in trefoils and opposite coloring so that red is on the white quarters and white is on the red quarters, as represented on the escutcheon of the State seal.

You do not have to take our word for any of that. Read Maryland Code in full at Justia, and check what we sell against it.

It is the real flag we produce, not a simplified version.

What is on it and what it means

Calvert is the founding Lords Baltimore. Crossland is the maternal line of George Calvert. The combined banner symbolizes reconciliation after the Civil War, because Calvert colors were flown by Unionist Marylanders and Crossland colors by Confederates.

What most listings get wrong

State law requires that the flagstaff ornament be a gold cross bottony, not a ball or an eagle. That is a legal requirement about the hardware, not the flag, and almost nobody selling the flag mentions it.

It is the only state flag based entirely on British heraldry, and one of the highest rated designs in the country.

Where the Maryland flag flies

Fort McHenry National Monument in Baltimore is where the garrison flag flew on September 14, 1814, inspiring Francis Scott Key. The original Star-Spangled Banner, made in Baltimore by Mary Pickersgill at thirty by forty two feet with fifteen stars and fifteen stripes, is preserved at the Smithsonian's National Museum of American History. Note that it is held in Washington rather than in Maryland.

Fly it on Maryland’s birthday

Maryland became the 7th state on April 28, 1788. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Maryland flag has an official reason to go up.

Buy it now and it is on the flagpole for the day. The full list of state birthdays is on our state birthdays page.

Nylon or polyester in Maryland

Nylon inland in the Baltimore suburbs and at Frederick. Polyester on Chesapeake and Atlantic tidewater.

For scale, the National Weather Service ultraviolet index forecast for Baltimore on July 23, 2026 was 9 at solar noon, in the very high band. That is the sun this flag has to survive.

This is a house flag, fifteen square feet, where the material determines whether it flies in a light breeze and how fast it dries once it rains.

This listing is the nylon. It is the right choice for the sheltered and moderate wind sites named above, on any house bracket, and anywhere the flag comes down in storms. Two things decide that. Nylon is light, so it flies on the breeze most yards actually get instead of hanging limp, and it dries fast, which is what fights mildew in a humid climate. What it gives up is ultraviolet life: nylon’s amide bonds absorb ultraviolet and break, so under hard sun it loses strength and color faster than polyester, and it loses roughly a tenth of its strength while it is wet. If your site is one of the exposed ones above, look at the polyester version of this flag instead.

Here is the part usually learned the hard way, after a second purchase: nylon catches wind on days polyester simply will not move. When the flag needs to be visibly flying — a quiet morning, a holiday, a funeral, a ceremony — that argues for nylon even on a site where polyester would technically last longer. A flag that just hangs there is not doing its job either.

The number most institutions rely on traces to the American Legion, which reports a roughly ninety-day expectation from the federal government for a flag flown daily sunrise to sunset, and about a quarter of that flown around the clock. Retailer experience puts nylon at three to six months daily, polyester at four to eight, and an occasionally flown flag at one to three years. These figures are practical guidance, not a warranty, and exposure will move them considerably.

How the 3x5 Feet is built

This size fails at the fly end first, and sooner than it should on most 3x5 foot flags, because this size gets bought on price more than any other. Four rows of lock stitching at the fly end is what separates one season from three.

Work the numbers and you get 15 square feet of nylon at roughly two ounces a square yard. At thirty miles an hour, the fly end actually outpaces the wind, because the wave running to the tip accelerates along the way — the reason the tip fails first, and the reason fly-end stitching count is the number that matters.

This is a one person job to raise or lower, folding down to drawer size. Rotating two flags monthly costs you a minute at this size, nothing more.

Lock stitching means each stitch is knotted into the next, so a broken thread stops where it broke rather than unzipping the seam. 4 rows does not mean 4 times the strength; it means 3 backups. The heading is an inch and a half of reinforced heavy duty white material, holding two solid brass grommets. Fifteen square feet of sail area works those grommets hard on a windy site.

The material here is commercial grade nylon. Its lightness lets it fly on a gentle breeze, it sheds rather than absorbs water, and it dries quickly, sparing the seams the extra weight and strain of staying wet. Field tested UV resistant ink handles the part that actually determines fade life: sun exposure.

Why this flag is harder to make than most

Intricate heraldic quartering with precise counterchanging. It is the most heraldically demanding flag in the country and the easiest to build slightly wrong.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Maryland flag placed 4, at 7.97 out of 10.

Will it fit my flagpole?

This is the size for a five or six foot house bracket or a fifteen to twenty foot flagpole, the most common residential setup nationwide.

Questions about the 3x5 Feet

What size flagpole does a 3x5 foot flag need? A six foot house bracket, or an in-ground flagpole of fifteen to twenty feet. It is the most common residential pairing in the country.

How long does a 3x5 foot nylon flag last outside? The federal working figure is about ninety days for a flag flown daily from sunrise to sunset, and about a quarter of that flown around the clock. Retailers commonly see three to six months in daily use and one to three years flown on occasions only.

Is this flag printed or sewn? The design is printed in UV resistant ink on one side and reads through in reverse on the back, which is how nearly every state flag sold in the country is made. The construction, the heading, the stitching and the grommets are sewn.

Why this size gets replaced most

There is nothing weaker about the 3x5 foot flag itself — it is just the size most often bought on price, and built to match. A cheap one with one or two rows of stitching on the fly end frays inside a season and is six inches shorter within two. The construction is what separates the two.

Specifications

• Size: 3x5 Feet
• Area: 15 square feet
• Material: 100 percent nylon
• Fly end: 4 rows of lock stitching
• Heading: heavy duty white, reinforced, 1-1/2 inch
• Finish: Brass Grommets
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

Both tables come down to one ratio: the flag’s length wants to be a quarter to a third of the flagpole’s height. When a size sits on the border between two rows, the smaller flag will fly on more days and outlast the bigger one, while the bigger flag is the one people notice from further off.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

Above roughly a hundred feet of flagpole, the quarter to a third guide keeps its accuracy but loses its simplicity: the flag now has to be specified alongside the truck, the halyard, the foundation and the wind load as a single system, and skipping that step is how a flagpole gets damaged rather than the flag. Several famous installations fly flags larger than the rule on purpose, with an engineer deciding it rather than a table.

We carry the full range whether or not every size appears on this website. If the size you need is not listed, we can still supply it.

About the back of the flag

A printed flag reads correctly from the front and reversed from the back. That is normal and it is true of almost every flag flown in the country. A flag that reads correctly from both sides is a double sided flag, built as two flags sewn together with a liner between them, and it costs roughly twice as much and weighs roughly twice as much. Unless the statute for a particular state requires it, single sided is the standard and the right choice.

Flying it with the United States flag

This is governed by the United States Flag Code, Title 4, Section 7: the United States flag always outranks every other flag in position, never displayed below it or to its right at the same level — right from the viewer’s side, that is. Two flagpoles of equal height place the United States flag at the viewer’s left with both flags the same size; if the poles differ in height, it goes on the taller pole; on one pole flying two flags, it sits at the top. The Flag Code carries no penalty for private citizens, but institutions treat it as the standard.

Buy two and they both last longer

Two flags, alternated month to month, beat three flags flown until they fall apart, because the material recovers on its days off and the fly end is not worked in the same place every day. Severe weather is the one time to take it down; a real windstorm can cost more in one night than six ordinary months of flying. Fraying starts at the fly end, not the middle, and a few minutes with a needle there adds a season.

For cities, counties, schools and agencies

Our state flags go to municipalities, school districts, fire and police departments, courthouses and state agencies regularly. Tax exempt purchasing is handled on the tax exempt page. For quantity, a replacement schedule, or a size outside this listing, use the contact page.

Why buy it from us

This is a small American company, and what you see listed is what we actually stock. Every flag is made in the United States, printed with UV resistant ink, and built to the construction described above, not to whatever a price point demands. Selling one flag that lasts beats selling three that fail. Orders over twenty five dollars ship free.