Delaware 8x12 Feet Nylon State Flag Made in USA

An 8x12 foot flag is institutional. Ninety six square feet goes on a forty to fifty foot flagpole outside a civic building, a campus, a large commercial site. It is not a flag anybody buys by accident.

This is the Delaware state flag at 8x12 Feet (96 square feet) in nylon, made in the United States and finished with a sewn rope and plated steel thimbles.

Built to the Delaware flag specification

The Delaware flag is set out in Delaware Code, Title 29, Section 306. It is a colonial blue field with a buff diamond containing the state coat of arms, and the date December 7, 1787 set below the diamond.

The design was adopted July 24, 1913.

This state's statute covers the design, the colors and the seal or emblem, and stops there — it sets no overall size for a modern outdoor flag to match. Most states take the same approach, which is exactly why every manufacturer builds state flags in the same standard sizes.

What we build is a faithful reproduction of that design, sized to the standard outdoor sizes every manufacturer uses and the states themselves order in. On an outdoor flag, the colors, the seal and the emblems are what has to be right, and here they are.

The law that defines it, in its own words

Delaware Code, Title 29, Section 306 reads:

The design of the official state flag shall be as follows: A background of colonial blue surrounding a diamond of buff in which diamond is placed the correct coat of arms of the State in the colors prescribed by law and in accordance with § 301 of this title, with the words, "December 7, 1787," to be inscribed underneath the diamond. The official state colors, colonial blue and buff, are designated by the Textile Color Card Association of the United States, Inc., New York, as "arno blue" Cable No. 10663, and "golden beige" Cable No. 10781 respectively; the color shades having been determined by Colorimetric Specifications of the National Bureau of Standards, United States Department of Commerce, in Test No. 2, 1/140565, dated November 18, 1954, which is on file with the Delaware Public Archives, Dover, Delaware. The colors of the coat of arms and other elements of the state flag shall be the following: Husbandman, trousers of gray brown, shirt of red, hat and hilling hoe of brown; rifleman, suit of green, binding, bag and leggings of buff, hat of brown, powder flask and feather of gray; shield, frame of shaded yellow, top panel of orange, center panel of blue, lower panel of white, ox of red brown, grass and corn of green, wheat and branches underfoot of yellow, heraldric wreath to be blue and silver (twisted); ship under full sail to have a dark hull and white sails; date, December 7, 1787, to be white; cord and tassels to be blue and gold.

The spelling heraldric is the statute’s own. The arms themselves are defined at Section 301 of the same title.

You do not have to take our word for any of that. Read Delaware Code in full at the Delaware Code, and check what we sell against it.

This is the flag we make. Not an approximation of it.

What is on it and what it means

The colors are colonial blue and buff, Washington’s uniform colors. The date marks Delaware as the first state to ratify the Constitution. The arms carry a farmer, a rifleman, a ship, an ox, wheat and corn.

Worth knowing about this flag

The layout is genuinely unusual. Almost no other state flag sets a date outside the central device, and the buff of the diamond is frequently printed as yellow.

Where the Delaware flag flies

Delaware's senators offer only the federal program and route residents who want a Delaware flag to contact a state legislator to obtain one, rather than to fly it over Legislative Hall. The Governor maintains an official flag status page for half staff orders at state buildings. Legislative Hall is a Colonial Revival building of 1931 to 1933, with wings added in 1965 to 1970 and again in 1994.

Fly it on Delaware’s birthday

Delaware became the first state on December 7, 1787. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Delaware flag has an official reason to go up.

Order ahead and this flag is ready for the day. The complete list of state birthdays lives on our state birthdays page.

Nylon or polyester in Delaware

Nylon in the Wilmington and Dover interior. Polyester at the coast at Rehoboth and Lewes.

This size, ninety six square feet, puts real load on a flagpole. On the exposed sites above polyester is not optional — it is the only sensible call, and the hardware needs to be rated for it.

This listing is the nylon. It is the right choice for the sheltered and moderate wind sites named above, on any house bracket, and anywhere the flag comes down in storms. Two things decide that. Nylon is light, so it flies on the breeze most yards actually get instead of hanging limp, and it dries fast, which is what fights mildew in a humid climate. What it gives up is ultraviolet life: nylon’s amide bonds absorb ultraviolet and break, so under hard sun it loses strength and color faster than polyester, and it loses roughly a tenth of its strength while it is wet. If your site is one of the exposed ones above, look at the polyester version of this flag instead.

Here is the part usually learned the hard way, after a second purchase: nylon catches wind on days polyester simply will not move. When the flag needs to be visibly flying — a quiet morning, a holiday, a funeral, a ceremony — that argues for nylon even on a site where polyester would technically last longer. A flag that just hangs there is not doing its job either.

The benchmark institutions generally lean on comes from the American Legion: the federal government's own expectation is about ninety days for a daily sunrise-to-sunset flag, and roughly a quarter of that flying around the clock. Retailers report three to six months for nylon flown daily, four to eight months for polyester, and one to three years for occasional flying. Treat those as working estimates rather than a warranty, since exposure can shift them a great deal.

How the 8x12 Feet is built

Six rows of lock stitching on the fly end, and the corners are zig zag stitched rather than run straight, because a straight seam at a corner can be worked open by the wind over a season.

The math comes to 96 square feet of nylon at roughly two ounces a square yard. In a thirty mile an hour wind, the fly end moves faster than the wind that is driving it, since the wave headed for the tip speeds up as it travels — which explains why the tip wears out first and why fly-end stitching count is worth checking on any listing.

Handling this size, on the ground or at the flagpole, is a two person job. A gust can take one person off balance while clipping ninety six square feet onto the halyard.

A lock stitch ties into the stitch next to it, so one broken thread does not unzip the whole seam — it just stops. 6 rows is not 6 times the strength; it is 5 backups. At this size, grommets disappear. A nylon rope runs the full length of the heading, ending in two plated steel thimbles, spreading the load instead of concentrating it at two fixed points.

The flag material is commercial grade nylon. It is light enough to fly in a gentle breeze, it sheds water rather than holding it, and it dries fast, which matters because a flag that stays wet stays heavy and works its seams harder. The ink is UV resistant and field tested; sun is what takes a flag’s color, and the ink decides how long it holds.

Why this flag is harder to make than most

Detailed arms plus dated lettering. Two elements that both need to stay legible, on a diamond that has to sit square.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Delaware flag placed 52, at 4.08 out of 10.

Will it fit my flagpole?

It suits an in-ground flagpole of forty to fifty feet, on a truck and halyard rather than a bracket.

Questions about the 8x12 Feet

What size flagpole for an 8x12 foot flag? Forty to fifty feet, on a truck and halyard rated for the load. This is an institutional flag.

What are the thimbles for? The rope sewn through the heading ends in two plated steel thimbles. The halyard snaps clip to the thimbles, so the pull runs through the rope along the whole hoist rather than tearing at two grommets.

Can an 8x12 foot flag fly around the clock? It can, on a lit flagpole, but a flag flown twenty four hours lasts roughly a quarter as long as one flown sunrise to sunset. Budget for that.

Why the grommets disappear

Two grommets concentrate ninety six square feet of pull onto two small brass rings. A rope sewn the length of the heading spreads that load across the entire hoist and lets the thimbles take the attachment. It is more expensive to build and it is the only way a flag this size survives.

Specifications

• Size: 8x12 Feet
• Area: 96 square feet
• Material: 100 percent nylon
• Fly end: 6 rows of lock stitching
• Heading: heavy duty white, reinforced, 2 inch
• Finish: Rope and Thimbles
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

There is one number behind both tables. A flag reads right when its length is somewhere between a quarter and a third of the flagpole it is on. If your flagpole puts you between two sizes, go smaller for a flag that flies more and lasts longer, or bigger for one that carries further.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

Above roughly a hundred feet of flagpole, the quarter to a third guide keeps its accuracy but loses its simplicity: the flag now has to be specified alongside the truck, the halyard, the foundation and the wind load as a single system, and skipping that step is how a flagpole gets damaged rather than the flag. Several famous installations fly flags larger than the rule on purpose, with an engineer deciding it rather than a table.

The website does not show every size we can supply. If yours is missing from the listing, the full range above is still available to order.

About the back of the flag

A printed flag's reverse face is a mirror image of the front, and that is standard, not a fault — it describes most of the flags flown across the country. Double sided construction, which reads correctly from either face, sews two flags together with a liner and roughly doubles both weight and price. Single sided remains standard, and correct, unless a state's statute specifically calls for double sided.

Flying it with the United States flag

Title 4, Section 7 of the Flag Code is the source for this. The United States flag is never subordinate in position — nothing flies above it, and nothing takes its place at the viewer’s left when flags are level with each other. On matched flagpoles, the United States flag takes the viewer’s left and the flags should be sized the same; on unequal flagpoles, it goes on the taller one; and on a single pole flying two flags, it goes at the top. There is no penalty for civilians who do not follow the Code, but institutions treat it as the standard regardless.

Buy two and they both last longer

One flag flown month after month wears faster at the same point every time; two flags rotated monthly outlast three run to failure, because rest lets fabric recover. Bring the flag in ahead of severe weather — a hard storm overnight can outdo six normal months. And check the fly end first, since that is where fraying starts, and a small stitch repair there is worth a full extra season.

For cities, counties, schools and agencies

This is a flag we sell to municipalities, school districts, fire and police departments, courthouses and state agencies as standard business. Use the tax exempt page for a tax exempt account, and the contact page for quantity orders, a replacement schedule, or a size not shown on this listing.

Why buy it from us

This is a small American company, and what you see listed is what we actually stock. Every flag is made in the United States, printed with UV resistant ink, and built to the construction described above, not to whatever a price point demands. Selling one flag that lasts beats selling three that fail. Orders over twenty five dollars ship free.