FORTISVEX Connecticut State Flag 5x8 Feet Nylon - Made in USA with Brass Grommets

This is commercial territory: a thirty foot flagpole outside a dealership, a bank, a fire station, a church, a school. Homeowners choose it too, when their flagpole is tall enough to make a 4x6 foot flag look undersized.

This is the Connecticut state flag at 5x8 Feet (40 square feet) in nylon, made in the United States and finished with brass grommets.

Built to the Connecticut flag specification

The Connecticut flag is set out in Connecticut General Statutes Section 3-107, with the arms at Section 3-105. It is an azure field with a white rococo shield carrying three grapevines and the motto Qui Transtulit Sustinet. The statute gives exact dimensions of five feet six inches by four feet four inches, describing the silk ceremonial color rather than a standard outdoor size.

Adopted in 1897.

Connecticut General Statutes Section 3-107 fixes the flag at five feet six inches by four feet four inches in azure blue silk. That is a ceremonial color from 1897. Nobody makes an outdoor flag in that size and the state itself does not fly one.

We hold to a faithful reproduction of that design, at the standard outdoor sizes the industry uses and the states themselves buy. What matters on a flag that flies outdoors is accurate colors, seal and emblems, and that is exactly what this one has.

The law that defines it, in its own words

Connecticut General Statutes Section 3-107 reads:

The following-described flag is the official flag of the state. The dimensions of the flag shall be five feet and six inches in length, four feet and four inches in width. The flag shall be azure blue, charged with an argent white shield of rococo design, having in the center three grape vines, supported and bearing fruit in natural colors. The bordure to the shield shall be in two colors, gold on the interior and silver on the exterior, adorned with natural-colored clusters of white oak leaves (Quercus alba) bearing acorns. Below the shield shall be a white streamer, cleft at each end, bordered by a band of gold within fine brown lines, and upon the streamer in dark blue block letters shall be the motto "QUI TRANSTULIT SUSTINET"; the whole design being the arms of the state.

You do not have to take our word for any of that. Read Connecticut General Statutes Section 3-107 in full at Justia, and check what we sell against it.

This is the flag we make. Not an approximation of it.

What is on it and what it means

The motto translates as He Who Transplanted Sustains. The three grapevines trace to a seal of 1711 and stand for the early settlements and the transplantation of the colony itself.

Worth knowing about this flag

The statute specifies a fixed size rather than a ratio, which means a scaled flag is a departure from the letter of the law even though every manufacturer scales it.

Where the Connecticut flag flies

Each holds a significant Civil War battle flag collection. Connecticut's is at the Museum of Connecticut History in Hartford. Illinois has the State Military Museum in Springfield. Massachusetts has the State House Hall of Flags. Michigan runs a Save the Flags program with rotating display at the Capitol. Minnesota's Historical Society holds the First Minnesota's colors associated with Gettysburg.

The Milford Green flagpole, a hundred and ten feet, a fiberglass pole dedicated in 2014 replacing a ninety nine point seven foot steel pole. Milford's mayor described it as the tallest flagpole in the state. It flies a twenty five by thirty foot flag, was gifted by the Devon Rotary, and was made and installed by All American Flagpole of Woonsocket, Rhode Island. The prior notable pole is the hundred foot Newtown flagpole, which stands in the middle of a street intersection.

Fly it on Connecticut’s birthday

Connecticut became the 5th state on January 9, 1788. Under the United States Flag Code as amended July 7, 1976, a state flag flown on the state’s birthday takes its place beneath the United States flag, and that day is the one date every year the Connecticut flag has an official reason to go up.

Order it ahead of the date and it is ready to fly that day. Every state’s birthday is listed on our state birthdays page.

Nylon or polyester in Connecticut

Nylon inland at Hartford. Polyester on Long Island Sound at Bridgeport, New Haven and Stamford for salt and coastal wind.

The heading takes real load at forty square feet in any gust, and the exposed sites above will reveal the difference between nylon and polyester within a season.

The nylon is what you are looking at here — the right choice for the sheltered and moderate wind sites named above, for a house bracket, and for anywhere the flag comes down ahead of storms. Two things settle it. It is light enough to fly on an ordinary yard’s breeze rather than sag, and it dries fast, fighting mildew in humid conditions. What it gives up is resistance to ultraviolet — nylon’s amide bonds break under sun, costing strength and color faster than polyester, and it loses roughly a tenth of its strength while wet. If the site is one of the exposed ones above, the polyester version fits better.

There is one more factor, and most people only discover it after buying the wrong material once: a nylon flag moves on days a polyester flag stays limp. If it matters to you that the flag is actually flying on a still morning, a holiday, at a funeral, at a ceremony, that favors nylon even where polyester would outlast it. A flag hanging motionless has failed at its job too.

Most institutions work from the same benchmark, reported by the American Legion: the United States government's expectation is roughly ninety days for a flag flown daily sunrise to sunset, and about a quarter of that for one flown around the clock. In practice, retailers report three to six months for nylon flown daily, four to eight for polyester, and one to three years for a flag flown only on occasions. These are working numbers, not a guarantee, and exposure can move them substantially either way.

How the 5x8 Feet is built

At this size the flag works hard, and any failure happens in public: a frayed tip on a business flagpole reads from the road, the same place the flag was meant to be seen from.

Here is the arithmetic: 40 square feet of nylon at roughly two ounces a square yard. A thirty mile an hour wind sends the fly end moving faster than the wind itself, since the wave traveling toward the tip picks up speed as it goes — which is why the tip wears out first, and why the fly end's stitching count is the figure to check on any listing.

At this size, two people beat one, especially in wind. Forty square feet of loose fabric catches wind mid-fold if you are working alone.

Each lock stitch knots into the one beside it, so a broken thread stays broken right where it snapped instead of unraveling the whole seam. 4 rows is not 4 times the strength — it is 3 backups. The heading widens to two inches here, heavy duty white and reinforced, with two solid brass grommets and tooth washers. Forty square feet in a gust is a serious pull on a heading, and the extra half inch is not decoration.

Commercial grade nylon is the material in this flag. Light enough to catch a gentle breeze, it sheds water rather than holding onto it and dries fast, which keeps a flag from staying heavy and stressing its seams. The ink is UV resistant and field tested, since sun exposure is what determines how long the color lasts.

Why this flag is harder to make than most

A fine rococo shield with three vines and a Latin motto. This is an arms-on-blue design, and the shield detail is where cheap reproductions fall apart first.

For what it is worth, the North American Vexillological Association surveyed 72 state, provincial and territorial flags in 2001 and rated them from zero to ten. The Connecticut flag placed 50, at 4.32 out of 10.

Will it fit my flagpole?

An in-ground flagpole of twenty five to thirty five feet is the pairing most commercial sites use for this size.

Questions about the 5x8 Feet

What size flagpole for a 5x8 foot flag? Twenty five to thirty five feet in the ground, which is the standard commercial flagpole. This is the size on most dealerships, banks and fire stations.

Should a business choose nylon or polyester at 5x8 Feet? Nylon flies more often and looks better on a calm day. Polyester lasts longer on an open, windy or coastal site. The section above names which your state is.

How often does a 5x8 foot commercial flag need replacing? A flag flown daily on an exposed commercial flagpole is typically replaced two to four times a year. A rotation of two flags swapped monthly stretches that.

What the condition of it says

People see the flag before they see the building it stands in front of. A worn, faded flag on a business flagpole sends a message, and that message costs something different from the price of a replacement.

Specifications

• Size: 5x8 Feet
• Area: 40 square feet
• Material: 100 percent nylon
• Fly end: 4 rows of lock stitching
• Heading: heavy duty white, reinforced, 2 inch
• Finish: Brass Grommets
• Ink: UV resistant, field tested
• Made in the United States by FORTISVEX

Which size do I need?

One rule sits under both tables: the flag should run about a quarter to a third the height of the flagpole. On the border between two rows, the smaller flag flies more and lasts longer; the larger one is the one you can see from the road.

If you know your flagpole height, start here.

• 6 Feet house bracket: 2x3 Feet or 3x5 Feet
• 15 to 20 Feet flagpole: 3x5 Feet or 4x6 Feet
• 20 to 25 Feet flagpole: 4x6 Feet or 5x8 Feet
• 25 to 35 Feet flagpole: 5x8 Feet or 6x10 Feet
• 35 to 45 Feet flagpole: 6x10 Feet or 8x12 Feet
• 45 to 60 Feet flagpole: 8x12 Feet or 10x15 Feet
• 60 to 80 Feet flagpole: 10x15 Feet or 12x18 Feet
• 80 to 100 Feet flagpole: 12x18 Feet or 15x25 Feet
• 100 to 120 Feet flagpole: 15x25 Feet or 20x30 Feet
• 120 to 150 Feet flagpole: 20x30 Feet or 20x38 Feet
• 150 to 200 Feet flagpole: 20x38 Feet or 30x50 Feet
• 200 to 240 Feet flagpole: 30x50 Feet or 30x60 Feet
• 240 Feet and above: 30x60 Feet or 50x80 Feet, engineered to the flagpole

If you know your flag size, start here.

• 2x3 Feet: 4 to 8 Feet bracket or garden flagpole
• 3x5 Feet: 6 Feet bracket, or 15 to 20 Feet in-ground flagpole
• 4x6 Feet: 18 to 25 Feet in-ground flagpole
• 5x8 Feet: 25 to 35 Feet flagpole
• 6x10 Feet: 30 to 40 Feet flagpole
• 8x12 Feet: 40 to 50 Feet flagpole
• 10x15 Feet: 50 to 60 Feet flagpole
• 12x18 Feet: 60 to 80 Feet flagpole
• 15x25 Feet: 80 to 100 Feet flagpole
• 20x30 Feet: 100 to 120 Feet flagpole
• 20x38 Feet: 120 to 150 Feet flagpole. This is the garrison size under Executive Order 10834, at a one to one point nine ratio rather than the two to three of the commercial sizes, and it is the size flown at the White House and the Capitol
• 30x50 Feet: 150 to 200 Feet flagpole
• 30x60 Feet: 200 to 240 Feet flagpole. This is the largest standard commercial size
• 50x80 Feet: 240 Feet and above, engineered to the flagpole

Push the flagpole past a hundred feet and the same ratio still applies, but it stops being a simple lookup: the flag, the truck, the halyard, the foundation and the wind load need to be engineered as a unit, and skipping that step damages the flagpole before it damages the flag. A number of famous large flags deliberately break the rule of thumb, on an engineer’s word rather than a table’s.

If a size in either table is missing from the website, it does not mean we do not carry it. The full range is available to order regardless of what is currently listed.

About the back of the flag

A printed flag reads correctly from the front and reversed from the back. That is normal and it is true of almost every flag flown in the country. A flag that reads correctly from both sides is a double sided flag, built as two flags sewn together with a liner between them, and it costs roughly twice as much and weighs roughly twice as much. Unless the statute for a particular state requires it, single sided is the standard and the right choice.

Flying it with the United States flag

Title 4, Section 7 of the Flag Code is the source for this. The United States flag is never subordinate in position — nothing flies above it, and nothing takes its place at the viewer’s left when flags are level with each other. On matched flagpoles, the United States flag takes the viewer’s left and the flags should be sized the same; on unequal flagpoles, it goes on the taller one; and on a single pole flying two flags, it goes at the top. There is no penalty for civilians who do not follow the Code, but institutions treat it as the standard regardless.

Buy two and they both last longer

One flag flown month after month wears faster at the same point every time; two flags rotated monthly outlast three run to failure, because rest lets fabric recover. Bring the flag in ahead of severe weather — a hard storm overnight can outdo six normal months. And check the fly end first, since that is where fraying starts, and a small stitch repair there is worth a full extra season.

For cities, counties, schools and agencies

Fire and police departments, school districts, courthouses, municipalities and state agencies are all regular buyers of our state flags. Tax exempt purchasing is set up through the tax exempt page, and quantities, replacement schedules or an unlisted size are handled through the contact page.

Why buy it from us

Small and American describes this company, and we stock what we list. Every flag is made in the United States, printed with UV resistant ink, and finished to the construction described above rather than to a price target. We’d rather sell one flag that holds up than three that don’t. Free shipping on orders over twenty five dollars.